I just bought one from eBay for my 06 Prius and it was way better quality. This video was made 2 yrs ago, so I suspect the quality has improved. The flange looks like the original one. Payd $104+tax.. fit perfect. Worth every penny.

@anyC

2 жыл бұрын

Which seller did you buy from Spacebound?

@spacebounduniverse9350

2 жыл бұрын

@@anyC ( nitupea ) located in walnut California.

@anyC

2 жыл бұрын

@@spacebounduniverse9350 Thank you

@subtledriver

Жыл бұрын

So what is the link to the one you purchased? Cheap fake cats on ebay don't last long, before check engine light comes on. especially on hybrids where they turn on and off many times in a drive. How many miles and years do you have, who installed it, how was the swivel flange and the pipe size to attach in the rear?

@brandonrestivo9181

4 ай бұрын

Curious how your eBay cat is functioning after a year.

I hate mechanics that try to find fault instead of finding solutions, the difference in OEM price is well worth the modification needed to make this work.

@leroystrokesmen5666

Жыл бұрын

Yes after market will work just fine

@SCBMusic1

Жыл бұрын

@@leroystrokesmen5666 exactly....I see no issues here.

@subtledriver

Жыл бұрын

It was installed after I cut off the flange and welded on a factory flange, then welded the back end since the pipes didn't slide over as advertised either.... the cat only lasted about 2 oil changes before getting check engine code for bad cat. Not worth it...

@Kyle_gallegher

Жыл бұрын

All he need to do is grind that inner sealing piece flush then he can weld the outer flange fully from the outside and walah 10 bucks in grinding wheels and 10 bucks for 2lb of ideal e71tgs if your doing it with cheap wire welder 10 bucks in gaskets.

@ptech88

Жыл бұрын

I think you would be the first to complain when this junk fails

At least he didnt say, "wont fit, buy oem" yes it needs to be modified, but sounds like this guy is willing and able to make this work for his customer.

@subtledriver

Жыл бұрын

It was installed after I cut off the flange and welded on a factory flange, then welded the back end since the pipes didn't slide over as advertised either.... the cat only lasted about 2 oil changes before getting check engine code for bad cat.

@steviehoover9628

7 ай бұрын

Yea the ebay cats I got lasted a month don't buy ebay junk

I'm not even a mechanic but I could fettle around with this to get it to work. You could use a clamp to reduce the size of the existing pipe and/or use a pipe expander on the Cat end to make it fit. On the other end that gasket is soft and made of lead, you could easily manipulate it to fit and create a good seal. Obviously if insurance was paying for it I would insist on OEM parts but if you have an old car not worth much I'd be looking at getting a $100 Cat.

@subtledriver

Жыл бұрын

It will leak, and cause it to run rich or throw codes from the torn lead seal and air leak and in a few months you will get a p0420 code cause the cat is not designed for an engine that turns off and on so many times.

@user-tz9sm8yd7m

Жыл бұрын

@@subtledriver I can fix this up in a couple of hours to make it work just fine

@subtledriver

Жыл бұрын

@Isaiah 54:17 you aren't an average person with basic hand tools, this is marketed to "bolt-on", but requires welding and the oem type flange to seat and move like the oem or higher quality units.

@user-tz9sm8yd7m

Жыл бұрын

@@subtledriver The ''average'' person wouldn't buy it online and try to do it himself in the first place.. any shop can make this pipe work with basic mechanic skills.

@subtledriver

Жыл бұрын

@user-tz9sm8yd7m the factory or quality aftermarket cat, can be fitted with basic hand tools and no cutting/welding ect. "Bolt-on", doesn't mean fabrication tools like welder and skills are required.

You are joking, right? Ever hear of a pipe expander? And lead gaskets are MADE to crush fit. You probably should not have ground off the welds. It would seal better sitting higher. For the $1500 difference between ebay and oem, I can deal with the gasket issues. And hire a mechanic who can improvise....

@dandan2903

3 жыл бұрын

Hey joe i have a question if you get this

@TheYungPrince

3 жыл бұрын

@@dandan2903 i got one for my prius it should best bet go to a backyard mechanic they will do it better than “professional” mechanics

@subtledriver

3 жыл бұрын

The original gasket is designed to seal with spring loading and be able to pivot/swivel with the engine movement to prevent the exhaust manifold from getting stress cracks. The pipe was physically equal with stock, and If the add states "bolt-on", it should bolt-on without need of extra tools and cutting off a warped flange. The other bolt-on cat's ive installed actually do bolt-up and have quality sealing without warped flanges and work like factory. thanks for the comment.

@philacy

2 жыл бұрын

Seriously. I don't need a mechanic worrying about like factory when I just had my cat cut out and stolen. Stop playing and get me back on the road.

@KevinGonzalez-rt6bm

2 жыл бұрын

@@philacy facts

Very educational video regarding Catalytic converter. As I decided to replace my catalytic converter after doing some homework, I now know a few things which I never knew before. Thank you

Thanks for letting us know about this. As for people that go out and Steal catalytic I believe that they should be charged to the max that the law wall law and it involves jail time so be it

Great Man,, thank you for your kindness words. We need more mechanic like you 🙏🙏

Great information! Thank you for pointing this out. Unfortunately I just received mine today but it's for a 2007 Toyota Tundra and the gaskets are different. They look like a simple ring that goes over a small extended piece of the pipe at both ends. I'm hoping like hell it's not going to give me too much grief. Cheers. Oh, by the way, I simply couldn't afford $800 plus CAD so the $133 CAD fit my budget. Hoping I can get it installed for less than $600!!!

@subtledriver

2 жыл бұрын

Good luck! Even if it fits well,,, usually the lower end cat will fail sooner than the expensive one because it has cheaper materials. I would make sure your primary o2 and maf sensor is working great, along with no air leaks and no misfires and thermostat working good. Any of these basic problems will ruin a cat very short time.

Definitely helped. Thanks . I will definitely look out for this. And the stealing cats, that’s just disgusting. Maybe we can suggest to the Manufacturers to design some type of alert or sensor that will alert the owners or maybe the police or somebody that these guys are taking the cats just as a suggestion

@LCKxReCKLeSS

2 жыл бұрын

They started building the cats in the manifold.

A $200 Flux welder and a pipe expander or just using bigger couplings may be cheaper than an oem cat too

Dude thanks for video I wish it was published earlier before I bought mine

I've made a similar one to this work on a Civic, the flange had the welds just like that. I just replaced the entire gasket with copper RTV, haha. It was a cheap car that needed a cheap fix and it held together for as long as I had the car so I was happy. I'm guessing that wouldn't be a recommended method for most people though 😂

@mediasmoker

9 ай бұрын

That was my first thought...why not just run a thick bead of Permatex around the joint? I've even heard of guys using furnace cement for exhaust leaks....and if it has a big hole or void, mix it up well with some fiberglass wall insulation. I get the point he's trying to make, but sometimes the rent needs to get paid, kids need to be fed or grandma needs her meds...and that car needs to get to work one way or another.

Thanks for the advice on a Catalic Converter for Honda Element 👍 really good tip about it to not buy cheap crap from Ebay & Amazon parts on this case of Catalic.

going to go check my hot deal right now, thanks for this video, hope mine is not a hot mess like this one was

Yep, they are of poor quality welds, but, you get what you pay for. I bought two sets of exact replacement cats and y pipe off Amazon for less than $700 saving about $900 on oem, I did this knowing full well that I would have to do modifications to them, being a mig welder of 25 years helps. If anyone buying these cheap cats isn’t a welder or know one that can do the mods they should take their vehicle to a muffler shop in the first place. But $700 and a few hours of my time isn’t a big deal, whereas saving $900 is. Btw it passed inspection, so they do work.

There's always a reason why its cheaper, great video thank you.

Thank you for taking the time to make this video. It was very useful and informative

Dealing with that aftermarket piece of crap is like being victimized all over again

Hey hey buddy I just had my catalytic converter stolen today I want to thank you for the Post because I was just about to buy one from the internet and go on the cheap side thank you

@carapungo

2 жыл бұрын

hey, were you able to fix this?, and how?

I have an idea about stopping catalytics converter thieves, once caught lets only cut one finger off n so on should they continue stealing cats.

@baikalc.4260

3 жыл бұрын

@Alexa Darling reason why thieves need their fingers chopped off.

@urielhernandez3286

3 жыл бұрын

@@baikalc.4260 most likely to cut both hands

Thanks for sharing. My mechanic has pipe expanders , welders, grinders and skills to make it work. That’s because he has years of experience.

thank you for this. one thing though, this is a 2nd gen prius. the 1st gen is 1999-2003

@subtledriver

3 жыл бұрын

you are correct. thanks

Seems like you could get this to work.

Thanks for the PSA but I think I'll buy this and a welder. Still a lot cheaper than OEM

@travispratt6327

3 жыл бұрын

Yea it’s not a matter of saving a few bucks… the cat for my rav4 for example is $1400 oem, $100 aftermarket.

There's a sleeve that connects those 2 ends at the back cut. Literally slips over the two halves and tightens with a clamp on each side. It's a rolled metal tube that squeezes tight.

@subtledriver

Жыл бұрын

That would be nice, if they included something like this. Unfortunately, the ad shows the new part as a slip over with a clamp to "seal it". I've seen many aftermarket cats just work fine. But these cheap ebay/Amazon knock-offs are out of control. Lol

@pjshooter6

Жыл бұрын

@@subtledriver size may be wrong but I attached a link to what I'm talking about!

i have the exact same cat. the front works as is. the gasket will seal whn you tighten it down. those caskets are soft and will conform. the rear i did cut and weld. cat works no codes.

@subtledriver

5 жыл бұрын

the function and purpose of the original is to swivel when the motor rocks back and forth to lessen stress and metal fatigue on all the components in the exhaust. this will cancel that function and cause more issues in the future. thanks for the comment.

@pepe58pepito54

4 жыл бұрын

how many miles on the new one. did your car had a problem going uphill or clog , or you change the cat for p0420 code..

@ernestworrell7447

4 жыл бұрын

The gasket will conform to the shape of the aftermarket flange and spin on the flat factory side of the flange. It will still provide the flex necessary, I think you just wanted to tell the people to buy another cat

That's really the only problem? You can adapt the rear and you can cut off the front and weld on the old one. Adapt

@Truevibe

3 жыл бұрын

exactly what i do with almost every aftermarket part i get. merge as much oem to it as possible. but i do get his point; people are paying money for "direct fit" now he has to do extra work. so the client loses money on both buying the part and letting it get installed

@TheWeirdSide1

3 жыл бұрын

So you pay less for "direct fit" and end up paying shop 100-170/hr to make it work.. Yeah, that's it. Might as well just buy an OEM CAT and have a longer lasting CAT. Which is what his point in video is.

@Kateee420

3 жыл бұрын

@@TheWeirdSide1 hahaha youre so stupid bruh

@VoxVeritatisOne

2 жыл бұрын

Did you watch the video? That's precisely what he said he was doing.

Kit I bought front end fits perfectly 👍

@kevinbaker2470

3 жыл бұрын

Hey regis im going to replace for a friend who had hers stolen. Do you mind sharing your link to the one that fit perfectly? Thank you and HNY!

@roostercogburn7243

3 жыл бұрын

@@kevinbaker2470 No link. He lied

Wow. Thanks for the info. I was going to buy on Ebay. When I saw this video. I change my mind. Good job on the video

Yeah someone still mine, and thanks I was ganna try to get a chipper one but watching this..🤔 I'll go to the auto parts 👍🏿

I currently have the exact problem he's talking about. I bought the cat on eBay, had it installed and I could smell the gasses coming into the car as I drive. i went to a muffler shop to have the back side of the pipe welded. I though my problem was solved but I can still smell the gasses. my suspicion was a bad doughnut gasket. I removed the bolts to check the gasket but it was fine , but I did noticed there was smoke marks around it where the gasses leak. I have not removed the cat since it's welded on but I think the cat has a bad flange. this video explains exactly what the problem is. Thanks

@subtledriver

4 жыл бұрын

Man! I'm sorry this happened to you before seeing this video! I would have the exhaust shop install a new upper flange, OEM style, they might have some used ones in the shop they can make work. Let us know how it goes.

Thanks for the imput!!! Mine got stolen 11/5/20 in plain daylight at Target.

@adamedwards2435

3 жыл бұрын

Scambags watched you park and walk into the store then took out their saw. May karma hit these animals hard.

@roostercogburn7243

3 жыл бұрын

You live in California? Happens everyday in my city.

Man, that's messed up the cats getting stolen. And whoever made that flange didn't know what they're doing. I bought one for my S10 of Amazon but I knew I would have to cut and weld into a pretty straight piece of pipe. Plus I own my own shop, this old S!0 has 220k and failed emissions. Amazon sold me universal marked damage because of the package for $30. Passed emissions next day.

@jlee7063

2 жыл бұрын

How did you hook that up? You should be doing Ytube videos and make bank from going viral….

So I finally bit the bullet and got a new cat for my 07 Nissan Sentra 2.0. This time it's CA regulated like it says on the sticker. It's been on for two days now. I have a question, is there a break in period before the good mpgs start to kick in? My SED light went off which is a blessing but it seems like my mpg's went down a little. Was there any special instructions that I was supposed to follow? My car has a direct fit so all I did was take it off, put on the new one and went about my way. TIA 🤔

cut off the bad designed flange and weld on the original designed flange. Other thought I had. I use Permatex ultra copper to seal up exhaust, it works well enough. Maybe that will seal it, needs to cure overnight. And you can buy wide band clamps to but joint exhaust pipes together that don't slide together, they also work well.

Hi, any luck this would be a good choice for my smart fortwo 2008 petrol : BM91590H by BM Catalysts. My original CAT rusted so bad that it broke

If the flange side bolts on could you not use some type of gasket shaped like the flange? Something like that came with an aftermarket cat that I purchased. Perhaps a heat resistant liquid gasket and then heat resistant epoxy as a double barrier around the edges

$5,000 reward for the reporting and capture of a illegal recycle centers, there is no honor among Thieves they will report on themselves, thieves are like cockroaches and will turn in their own mother for a buck, it's as simple as that, problem solved

@franciscomiguelperezcabrer8989

3 жыл бұрын

Close all the private own recycle centers and open only state own recycling centers, all recycling center are corructed, that is why is happening everywhere.

@subtledriver

3 жыл бұрын

@@franciscomiguelperezcabrer8989 or just have cops writing down names/info of people who turn in cats

@me3333

3 жыл бұрын

@@franciscomiguelperezcabrer8989 A deep state socialist recycling center may sound like a utopia to you but with how sketchy EVERY other government operation is I doubt that is the solution to the problem. Not all recycling centers are "corructed" and there are a lot of honest hard working people in that industry, not to mention the people that depend on the money they get from recycling. I'm not sure what the answer is to the problem but I think having undercover cops go in and bust buyers/sellers of stolen cats would help. I would also like to see a 400K volt anti-theft stun/converter aftermarket unit :P

@jairadouroux7872

3 жыл бұрын

@@me3333 I’d love to see that happen 😉🙏🏽

@me3333

3 жыл бұрын

@@jairadouroux7872 It would be cool to set up a camera to record them and put them on TikTok/KZread :)

brother,thank you very much.awesome video.

is this the same for a 2001 toyota sequoia? or is this for the prius only??

I will cut the flange and weld the old one

@HectorRivera-mf6ng

3 жыл бұрын

Smh. So would i

@badcommentbot8349

3 жыл бұрын

Yes

@davidholland5619

3 жыл бұрын

how if it was stolen duh the old one is not there to cut ends off and replace with new one

Did he put it on? If not the grinding of the welds probably made it so it couldn't be returned

They’re literally made mass produced in an assembly line kinda style, they’re also $100 to $250 and from EBay/ Amazon, what’d ya expect? There’s several that even state “further modifications maybe needed”.

@jlee7063

2 жыл бұрын

Yeah, the $3,000.00 to $4500.00 is the better route to take 👌

@GMC.Sonoma.4.3

Жыл бұрын

@@jlee7063 if you have a enough money lol if you actually watched the video you would know the better route is this since thieves can’t make money stealing these knock off catylitic converter.

seems like I am good then. I am going to get one from Ebay for my ls swap. I am building the exhaust anyway. So it seems like we are good to go.

@budthechud3408

3 жыл бұрын

Out of curiosity did you ever get the ebay parts for your ls swap? How well did it perform?

@ClintonC1991

3 жыл бұрын

@@budthechud3408 sorry I didn't. I decided to leave the cats off

@johnc3730

3 жыл бұрын

Why the mechanic asked me if the front cat or the rear one is problem when I called him for repair? I only know there is one cat in the rear. Thank you.

Do cng vehicles need them? If stolen stolen how can i cheaply make it quiet quiet and stop backfireing and be able to go fast again?

muffler shops have tubing expanders they can use

Would you say we are obligated to change a catyltic converter? Also, if it's failing.. would that make a huge muffler noise?

I bought 3 converters off of ebay (my car takes 3) fit alright but all the nuts they sent didn't fit the bolts welded to the cats.

Enlarge the rear pipe with a stretcher cut and weld the old mount on the other end? Fixed

I just got one for my Honda and it fit perfect …car still loud tho but not as bad I think it’s due to the theft trying to cut it off at first when it’s a bolt on

My good folks at orielys helped me find a gasket to fit my jeep tj DNA muffler and told me about muffler cement/putty as a backup for a misaligned seal

appreciate you sharing this info thanks!

As a person who works with exhaust systems I will only install Walker Ultra, Dorman, or Magnaflow catalytic converters. The others will just fail even if they fit properly.

What do you recommend to buy for a gen2 prius? I Can’t seem t get a straight answer.

@subtledriver

3 жыл бұрын

oem, or magnaflow

Me too! Wish I saw this b4 I got one. 🤦🏾‍♂️

The problem is they brought the car to you instead of the exaughts shop who will weld it on. They can also just cut off the end and weld the original flange onto the aftermarket cat. Probably charge $300

I'm seeing these cats don't have connections for 02 sensors. I'm really confused now.

@hunterhudak947

3 жыл бұрын

You can buy them with or without depending on what you need for your vehicle.

Wish I seen this before I did buy mine

I was wondering if you could help me figure out how much a catalytic converter should cost for a vw passat 2014. Im pretty dumb when it comes to car stuff and I see prices online anywhere from 250$-1500$. Im so confused. Thank you

@roostercogburn7243

3 жыл бұрын

If you live in California it's gonna be expensive. My cats went bad on my Hyundai. Costing my $2000 to get it fixed. 🤬

Strange. I bought one of those for my 2008 Prius and the muffler shop installed it in 20 minutes. No complaints!

@subtledriver

2 жыл бұрын

you should double check their work.

@subtledriver

2 жыл бұрын

How much did they charge for 20 minutes?

@TheOriginalDavidBrock

2 жыл бұрын

@@subtledriver The owner let me watch under the rack as he personally installed the replacement converter and oxygen sensor. Earlier I had watched him install a custom exhaust system on a brand new Porsche and a muffler on the City Fire Marshals work vehicle. When I left the system sounded better than what was stolen off of my 14 year old Prius. He checked emissions and it passed the state requirements. I don't know what more you would expect a customer to do.

@TheOriginalDavidBrock

2 жыл бұрын

@@subtledriver Including the cost of materials I paid about 25 % of what I was quoted elsewhere. I gave the guy a $20 tip since finishing my repair made his wife wait to pick him up after closing.

Two couplings little welding done still cheaper then oem . You could even just weld back of flange then grind fix top flange. Its not a major issue cause it isn't a slide on and bolt up. If I put it in a shop I do not expect clamps anyway. As for catalytic thieves. Bag and tag them if ya catch them.

What about the direct fit cat converters

Question - are there 2 catalytic converters on that pipe.??? Why are there two.???

Hey, sorry to see it happen to anyone. what brand cat is that?

My 01 Honda Accord cat just got stolen this morning. Do you have any recommend websites where I can buy a good aftermarket cat?

@subtledriver

4 жыл бұрын

get one made by walker or magnaflow. make sure it is cali approved if you live in a smog area.

What was the brand and the ebay shop name?

I agree the flange on those ebay/amazon catalytic converters don't work, it's a big headache I learned the hard way

3:15 problem solved, use a normal gasket design. there are many exhaust gaskets from other vehicles that will fit that flange and go in between the two pieces rather than inside it. all in all any mechanic shop that isn't just your neighbor bubba's house garage has more than enough tools to easily install that. like 30 minutes tops, no problems whatsoever. the real problem is that since it is just a few hundred dollars, it's not using the rare metals that are found in an oem cat, it's using a ceramic substrate with anyhwere from 0 to very little (barely above 0) of the catalysts (precious metals that heat up and catalyze unburnt fuel's transition to it's fully combusted products) needed to make it work properly. a *good* shop would not only have no problems, but no complaints installing one of these. they would however caution you that it will not function XD

@helterskelter416

2 жыл бұрын

a better honest video would just explain what i did, and not make excuses about it being hard to install, which it is not.

@johnmullen8375

2 жыл бұрын

Ssssssss

420 code blaze it ☄️💨

there are tool to expend pipes to fit each others , flenge side you have to grind it little bit to fit , seem to be you just want to be too easy for you .

What happens if the content of the cat converter is scrapped out? How does that affect the car?

@subtledriver

2 жыл бұрын

depends on the vehicle, usually a check engine light turns on, and doesn't run as clean as before.

Thank you so much telling us about this…. I hate taking someone stuff without asking them … I hate a tiff

I replaced mine with one similar to that, fit right on

too late for me, I bought two of catalytic converter bank 1 and bank 2 for my 10 3.5L V6 Honda Accord. The bank 1 fortunately fits but the other does not. I am mad as hell right now I wish I should have seen this video before purchasing my catalytic converters.

@certifiedbully6063

3 жыл бұрын

What year was your Accord? My daughter has an 07 hers was stolen

Don't charge too much for 'em and thieves will stop stealing 'em.

@subtledriver

4 жыл бұрын

They cost a lot to make unfortunately. And cali laws prohibit lower quality units.

@kg4tnp

3 жыл бұрын

Obviously you have no clue as to how vehicles work

How can i tell my 06 toyota sequiia cats are genuine s toyota? Pls, help.

@robertb6362

3 жыл бұрын

They'll have a Toyota symbol stamp as well as number

Thank you for your video , Quick question, does the Catholic convert to give the press a better sound?

@dearboy05

4 жыл бұрын

No. They also do not sound good with "high flow" or straigh pipe exhaust, which may also decrease economy. They are meticulously designed to work with the exhaust as it comes.

@ItsmsWhite

3 жыл бұрын

:)

@ragnaroksangel

2 жыл бұрын

The Catholic convert? Fucking what?

@imnobody108

2 жыл бұрын

I think he wants a catheter converter. Maybe change a male catheter to a female one 🤷‍♂️

thanks for the video. is this an AP-Eastern, or, a Walker product?

@subtledriver

Жыл бұрын

This is none of those. It is the cheapest on ebay/Amazon. Not going to bolt-up as advertised. Unless you cut and weld.

This gaskets soft and take shape

@subtledriver

3 жыл бұрын

yes, but original gasket is designed to pivot and seal with spring tension, crush seal will crack the manifold.

Tail Pipe expander for the rear, and clamp down the front, gasket will form to fit

Will this cause a slight misfire??

What brand was the Cat in this Video? Last week some Bastard/Bastardette sawzalled the 2 Cats off my Cadillac

@subtledriver

3 жыл бұрын

the cheapest one. not sure anymore

I popped some rtv on both sides of the gasket. I've got a good 3 years out if it. I just passed my emissions test 2 weeks ago.

@ghasanahmed6159

4 жыл бұрын

What's rtv I have same problem I just bought mine of Ebay and got check engine light

@bri9435

4 жыл бұрын

Permatex Rtv high temp gasket maker

@ghasanahmed6159

4 жыл бұрын

@@bri9435 dude thank you 4 getting back I'm gonna try it out I was about give my car to junker and carry another loan.

@bri9435

4 жыл бұрын

@@ghasanahmed6159 no problem. Just make sure you read the instructions, you have to let it set for a few hours. Maybe even overnight.

@bri9435

4 жыл бұрын

@@ghasanahmed6159 did it work????

Exhaust pipe stretcher???

@scientist100

3 жыл бұрын

Yeah, and cut a slit and weld it later

can these be grinded to fit better

Had a aftermarket on my honda, they work for about ,3 months then p0420, honda Toyota, only original catalytic converter, work only

Yup had ours stolen off my sons 2002 Honda CR-V. he’s a poor student with rising costs on everything including school. The car was in mint condition and safe for him to drive. I would of given them 200-$300 not to cut it out. Oem is way to expensive , can we run straight pipe bypass the a CAT, We live in a place where old vehicles are not inspected annually, or any other alternative . Where he works , it’s a dark place and 100% sure it will happen again . Seems like a new black market industry now of days .

I would have sent that junk back. I got mine from Amazon but mine is made closer to the factory one. So everything bolted up very nicely with no issues. The only problem is that every so often if I have to floor the gas to merge onto the highway the check engine light will be on on the next start cycle. After a few cycles it goes back off on its own. But Always comes back anytime I have to accelerate too hard. I got so tired of this bs that I started looking for a factory one. But I can't find anything under 3k. I barely paid that much for the whole car so that's out of the question. On my first gen prius I was able to find a factory Cat for 900. I was really hoping to find something around that price for this 2nd gen.

You didn’t mention the name of the brand. Is this one of the Evan Fischer ones or just some generic, obscure brand? I need to know because I’m about to buy 2….

What is the best catalytic converters for California compliance 8.1 Chevy engine 01 f... them thieves?

Pipe diameter adapters?

Thank you …so so much for your info

i just went thru 2 direct fits on my f150, both didnt fit... too small, i think what they want is for you to buy both sides and they will fit

@subtledriver

2 жыл бұрын

Man that sucks

Will it seal if you spit on it?

Thanks for that. Just had my CC stolen - they work like a pit crew - in and out in a seconds. Looking for parts now for my Honda Jazz S. Lol loved your Prius comment at the end. Are you in California?

@subtledriver

4 жыл бұрын

Yes I am in Cali. Glad this was helpful.

@Denniss7420

3 жыл бұрын

@@subtledriver LOLz....I shouldn't be passing Any V8 vehicle while getting on the freeway.....But some people Do Not know how to put the pedal to the metal! It's power mode all the time while driving the Prius.

@roostercogburn7243

3 жыл бұрын

@@subtledriver How did that guy get the cat delivered in California? Can I get a link? Costing me 2000k for factory parts. I found one for 160 online. Won't even ship to California. 🤬

@redteamla

Жыл бұрын

@@roostercogburn7243 Ebay

Where the f can i get a catalytic converter for my 03 accord if they don't ship it to california? Why's that? What's the point??

@roostercogburn7243

3 жыл бұрын

Talk to your representative that your voted in.

Are there solutions that you can put into your car to make the metals that are in the catalytic converters worthless? If that can be done it would make stealing them not worth it. The other option would be to have real time tracking when it gets stolen.

@GMC.Sonoma.4.3

Жыл бұрын

No they use those metals in a oem catylitic converter to filter particulates better. ‘Switching the metals out won’t do anything.

@CB_NekoGirl

Жыл бұрын

@@GMC.Sonoma.4.3 Ok. Thanks. I just wish that there was no market for that or to at least make it worthless.

Just cut the flange off, weld the old one on , what's the problem?

The 2013 Toyota camry hybrid cats are the same way as well, and the gasket they send with it aren't the right size either