You have to clean both of the screens in each inlet inside the washer hose inlet on the washer itself. There are two screens for each cold and hot on the washer.. One is inside the machine inlet that you can't see, and one outside the machine that you can barely see, it has a tab you pull out. Use a flashlight and look inside the inlet tube or nipple that's threaded, after you pull the first screen off you'll see it.. My inside screen was clogged bad, so I just took it out with a flathead screwdriver, and eliminated it totally. Both hoses were good, I saved some money, didn't need new hoses... All fixed.

Thank you!!! You have a great way of explaining things!!! I'll be back to let you know how it went.

@TheBestOrion

4 жыл бұрын

How'd it go?

Great advice I used lemon juice to clean filter but no dice. Thanks

Thanks

@helpinguonline

4 ай бұрын

No problem

Problem solved! Thanks a mil! 😁👍🏼

@helpinguonline

4 жыл бұрын

Glad I could help!

Nice, sometimes it’s the valves as well.

I just change the valve but still take too long for filling the tank specially when I have the last filling the hoses are ok what do I have to check

@helpinguonline

3 жыл бұрын

There aren't many parts involved... I would disconnect the water line from the back of the valve and turn it on with water line end in tub of washer... see if that is clear. Then check the screens between the water line ends and the valve and make sure they aren't clogged. If you have a new valve and it is working properly then the only thing left is the line between the valve and the tub filling. You should be able to track it down. Hope that helps.

@marifergarcia4652

3 жыл бұрын

@@helpinguonline thank you very much I will going to verify maybe the valve is having a problem.

Nice

My name is simba and I am a big. BOY

THE BODHI 12345