I read those washers they look like the right size lololol

i had a Heatcraft unit here in New Zealand. The supply house would label it Henry, interlink and AC &R under their label. All of it came out of China. The copper was corroded and green before brazing. I had to use emery cloth and flux to get 15% silver to adhere 🤣

@HVACRSurvival

2 жыл бұрын

Not what I wanted to hear but glad you mentioned it.

Cut off wheel for the win!

@HVACRSurvival

2 жыл бұрын

😂🤜🤛👍👍

I want that side cutter. Good vid

I put the Bohns in for years, when I got a new style one sent to me I sent it back, I’m not installing that garbage. Terrible terrible change to their design. Ordered the tecumseh outdoor unit instead, it’s a beautiful unit.

@Freezier134a

2 жыл бұрын

Also curious where you found your flipable 11/32-3/8 bit! I haven’t seen those in Canada anywhere and malco doesn’t list it on their website.

@HVACRSurvival

2 жыл бұрын

@@Freezier134a it's Klien. If you use the link it supports the channel at the same cost to you. amzn.to/3Io8nP5

I use the screwdriver sticking method to check the solenoid...but be advised...the energy to the solenoid does not 100% guarantee that the valve opens.

16:48 Its an single speed but the rating is 50 (1300 rpm) /60 ( 1550rpm) hertz

@HVACRSurvival

2 жыл бұрын

Thanks! that makes sense!

Nicely done Rick!

Good vid as usual and I bought those Klein sockets off the link you listed below ... Thx for the heads up ...

@HVACRSurvival

2 жыл бұрын

Cool, thanks Eddy!👍👍

Great video as always. 😊 Just had my new Daikin installed to replace my Panasonic and had the Mitsubishi Electric repaired and both are working great.... Just as the Australian summer ends. Oh well. 🤣

@liam3284

2 жыл бұрын

In time for heat pump use over the winter?

Great job Rick

Great video.

Great job.✌

What a pain to get that fan motor out .

@liam3284

2 жыл бұрын

They use a cheap unreliable motor, and make it hard to replace. Almost like they don't want repeat business.

Very thorough troubleshooting sir, you kept digging in to find the root of the problem. Thank for the tip checking liquid line solenoid with the amp meter

@HVACRSurvival

2 жыл бұрын

That's a cool little trick that makes sense, I wish I could take credit for it 😂👍👍

Antelopes and zebras? Where you working at? The Sarangetti?

@HVACRSurvival

2 жыл бұрын

Lol That's me trying to be funny

While watching the fan motor replacement this thought popped into my mind, "if it won't go, force it, if it breaks, well it needed replacement any way".

@HVACRSurvival

2 жыл бұрын

🤣👍👍 it's broke already right 😉👍👍

Excellent 👍👍👍

Good job Rick.

@HVACRSurvival

2 жыл бұрын

Thanks John!

Rick, as always the video is awesome !

@HVACRSurvival

2 жыл бұрын

Thanks🐻

Nice troubleshooting and repair

@HVACRSurvival

2 жыл бұрын

Thanks for watching!!

Good troubleshooting and repair work. Without the gauges on the unit to know pressutes, I was leaning toward suspecting the evaporator fan delay switch. As you already know, sometimes they are in a two-in-one arrangement, enclosed in the same body as the defrost termination switch and sometimes they are a separate switch all to itself. With the gauges attached to the system, that high head would have been seen right away. Again, good troubleleshooting work on your part.

@HVACRSurvival

2 жыл бұрын

Thanks man for the feedback and watching the video! 🤜🤛👍👍

good job 👍

@HVACRSurvival

2 жыл бұрын

Thanks🤜🤛👍👍

I like the thermo image camera, what brand is it? Are those expensive? I see how that could save time. Thanks love the videos

@HVACRSurvival

2 жыл бұрын

Flir, about $700 now, I got it for about $550 area less than a year ago

Have a phone adapter Flir but have not used it often enough.... hope to see you showing other uses for the thermal camera... kudos!

@HVACRSurvival

2 жыл бұрын

Trying to find any good reason to use it after spending the money I did 😂

Seems nothing was quite right about that install. I kept focusing on the use of non exterior rated flex cord for the mains power, that and the use of a non-watertight fitting (romex clamp?) on the side. 🤦‍♀️ you appear to have much more patience for slop than I, sir Rick!

@HVACRSurvival

2 жыл бұрын

I can complain but nothing gets done about it. I gave up and only worry about the work I do unless its a safety issue

I absolutely hate those new Bohns, nothing makes sense in them.

@HVACRSurvival

2 жыл бұрын

I agree 💯👍👍

❄💪🇺🇸👍 great vid. Reason for evaporator fans not running? Was warm box temp shutting fans off dtfd switch ? I understand condenser fan down causes hi head n shut down but evaporator fans not running?

@HVACRSurvival

2 жыл бұрын

The defrost termination switch wasn't cold enough yet to bring on the EVAP fans.

@shine-cg9uf

2 жыл бұрын

@@HVACRSurvival thanks Rick Great troubleshooting. Very helpful

@HVACRSurvival

2 жыл бұрын

Your welcome bud!

As always another kick a** video Rick. You have an exceptional talent for thinking things through logically. Sequence of operations and understanding how and what components are supposed to do and when they are supposed to do it. Oh and the Rick D on the allen key set.....makes me think you were the 5 member of the Beastie Boys.....hahahahahaha just playing....chat at you later on the live stream

@HVACRSurvival

2 жыл бұрын

Thanks Jason! No sleep till....

@jasonjohnsonHVAC

2 жыл бұрын

@HVACR Survival intergalactic.....planetary......planetary.....intergalactic

When next I'm in the market for some HVAC/R tools, I'll be sure to use that code. Are you doing the affiliate link think with TTT as well?

@HVACRSurvival

2 жыл бұрын

Yes sir. I got to make the links yet, hopefully this week👍👍

Bohn-headed design.

@HVACRSurvival

Жыл бұрын

😁👍👍

Я понять не могу зачем ставить таймер на оттайку? Если можно поставить контролёр например еливел id 974 и контактор и таймер тогда не нужен.???!!!!

@user-js7in1cl2v

2 жыл бұрын

С механическим таймером проще и надежней.

@morozko2796

2 жыл бұрын

@@user-js7in1cl2v чем надёжнее? Чем проще тем надёжнее, и это поставить контролёр евелел 974 чем, таймер и городить огород, проходили эти таймеры ещё в советское время не чего толком не работало.

Was that a McMillan motor?

@jerryfrigeration

2 жыл бұрын

Oops just seen interlink

166 Thumbs Up

What a piece of trash design that Bohn condensing unit looks. Hope I don't run into one.

Dont use such big words like arbitrary, I dont understand.

@HVACRSurvival

2 жыл бұрын

Me neither 😂😁👍👍

Nice job! Thanks again for the videos! 🥃🥃🍺🍺🍺🎳⛳ Stay safe. Retired (werk'n)keyboard super tech. Wear your safety glasses!

I know your making these videos to help people .. but it’s hard watching your videos .. you sound good but .. you still have years to go ..lol

@HVACRSurvival

2 жыл бұрын

Thanks, I think?