Enjoy your content vertically and horizontally with the Auto-Rotate Wall Mount! This optimizes your viewing experience when watching vertical content, such as TikToks, KZread shorts, or Instagram Reels. The Auto-Rotate Wall Mount is a compatible accessory for The Frame and Neo QLED TVs, and is available in two different sizes: 43”-55” (200x200 VESA compatible) and 55”-65” (400x300 VESA compatible).
Installing the auto rotating accessory to your TV is a cinch, but before you get started, make sure you have the appropriate mounting hardware for your wall type and the documentation that came with your specific TV. You’ll want to follow that closely. When you’re ready to get started, begin by attaching the VESA mounting bracket, followed by the auto-rotate wall mount. Next, attach the cable holder and remove the back cover. Wrap the cables around the holder and guide, plug in the AC adapter, and then place the cover back on.
You can mount your TV to the wall two different ways, either with the Wall Reinforcement Bracket or without it. For brick or concrete surfaces, you can just use the Wall Brackets. First, secure the wall brackets to the reinforcement bracket. Once you’ve found the ideal spot on the wall for your TV, hold the reinforcement bracket up to the wall making sure it’s level. Next, use a pencil to mark the locations where the pilot holes will go, and then drill the four pilot holes. Now attach it to the wall with the provided screws. With the help of a friend, you can now hang your TV. Finally, pair and connect your TV to the Auto-Rotate Wall Mount. Once paired, long press the Multi view button on your remote to rotate your TV vertically and horizontally! Watch this video for full details.