I bought these exact brackets, good to know I made a wise choice. I was going to swap out the brackets from the old handrail, but realized repairing the old handrail would be more work than I originally thought. So now I'm looking at building a new one.
@ArtisanTony
Жыл бұрын
I like these better than the brackets with two screws into the wall. Those have the screws to close together and that is why I like the single screw.
@Karl-ej6rs10 ай бұрын
Thanks for the tips. The length of the 90 degree block and how to pin it helped a lot.
@ArtisanTony
10 ай бұрын
Thanks for watching :)
@DIMTips3 жыл бұрын
Great video. I installed a handrail too.
@mishawakapost26815 жыл бұрын
Fist bumps 👊👊👊👊👊, high fives/pats on the back ✋✋✋✋✋, extra thumbs up 👍👍👍👍👍 Pets ❤❤❤❤❤, treats and tummy rubs.
@ArtisanTony
3 жыл бұрын
sorry, I missed this a year ago :)
@jefflong15333 жыл бұрын
Great tips in this video! Thank you!
@ArtisanTony
3 жыл бұрын
Thanks! :)
@mercoid Жыл бұрын
I like the slide correction. Good tips. Too late for me.., I already bought the three hole mount brackets a few days ago. I was going to block out between the studs anyways for the sake of even and sensible placement of the brackets…so no big whoop. My realtor told me to install a railing in prep to sell.
@ArtisanTony
Жыл бұрын
You can swap them out :) I really don't like the two hole ones. It seems you always have to angle one screw to catch the stud. and it's too close to the stud to put an anchor. I am sure it will turn out fine :)
@brandanbutler87892 ай бұрын
How would you feel about using a dowel or two to join a connection like this? I’m not a woodworker just curious if that could be a practical approach.
@ArtisanTony
2 ай бұрын
This CA glue is a permanent bond, you cannot pull it apart. You will split or pull apart the other wood first :) No dowel or nails needed. The point of this glue is no fasteners are needed and it quick! Thanks!
@msk3905
Ай бұрын
@@ArtisanTonywhat brands CA glue do you and why not wood glue?
@billrose51462 жыл бұрын
Where's the video for installing it?
@quinnhaynie77672 жыл бұрын
Thumbnail got me, lol
@johnp82 Жыл бұрын
Is there a part 2?
@jotu1734 жыл бұрын
And where is "part 2" ?????
@johna76014 жыл бұрын
After painting and mounting the rail, should the ends against the wall be caulked?
@ArtisanTony
4 жыл бұрын
I don't like caulk but if you like it fine :)
@den-yc3hv
Жыл бұрын
A little late on this ,but not on stain grade .
@StayUplifted7 ай бұрын
How do you handle the transition mite from stair handrail to horizontal at landing? Thanks
@ArtisanTony
7 ай бұрын
In residential, that transition is not required but for commercial work where ADA applies, you can miter it for the horizontal transition for about a foot then turn to the wall. Thanks!
@mrwilliamssr4 жыл бұрын
🤣🤣🤣 "See that big Honker"
@ArtisanTony
4 жыл бұрын
haha
@mcrane2653 Жыл бұрын
razor scraper for stickers
@danr251310 ай бұрын
What size drill bit did you use? 1/8”?
@ArtisanTony
10 ай бұрын
I think it's 3/32, just bit smaller than the threads.
@mercoid Жыл бұрын
Ottyzan Tony!!!
@ArtisanTony
Жыл бұрын
lol
@shanewaldron29712 жыл бұрын
Part 2?
@nodoubt46able7 ай бұрын
tip for u.....quik set ca glue, and trim screws with small heads ffs.. why are you putting them big honking screws in a finished rail?
@ArtisanTony
7 ай бұрын
I didn’t gave any on hand, calm down dude lol
@ivaluska4 жыл бұрын
I've said it before... ALWAYS show the finished result first and then show how it was done. You did great right up until you forgot to include the big payoff. Ah, well... HA!
@ArtisanTony
4 жыл бұрын
well make a video and show us how it is done pro lol
@ArtisanTony
4 жыл бұрын
oh snap, i checked your channel and you have created nothing. maybe try doing it first then criticizing others.
@andrewsworkshop
2 жыл бұрын
@@ArtisanTony lol. Well said.
@juanrivera54342 жыл бұрын
Do I only need to add one screw to the return handrail?
@ArtisanTony
2 жыл бұрын
I am always afraid to add more than one trim screw due to the possibility of splitting the rail but we glue it also which I don't remember if we show or not. The screw holds it until the glue dries.
@juanrivera5434
2 жыл бұрын
@@ArtisanTony I am in the process of building my handrails, and so far, the glue and single screw are working... thanks!
@ArtisanTony
2 жыл бұрын
@@juanrivera5434 awesome :) the will work as long as no one puts excessive force on the return :)
@saltyshellback5 жыл бұрын
Yay!!! I beat Tony!!!...oh wait...wrong channel...lol
Пікірлер: 46
I bought these exact brackets, good to know I made a wise choice. I was going to swap out the brackets from the old handrail, but realized repairing the old handrail would be more work than I originally thought. So now I'm looking at building a new one.
@ArtisanTony
Жыл бұрын
I like these better than the brackets with two screws into the wall. Those have the screws to close together and that is why I like the single screw.
Thanks for the tips. The length of the 90 degree block and how to pin it helped a lot.
@ArtisanTony
10 ай бұрын
Thanks for watching :)
Great video. I installed a handrail too.
Fist bumps 👊👊👊👊👊, high fives/pats on the back ✋✋✋✋✋, extra thumbs up 👍👍👍👍👍 Pets ❤❤❤❤❤, treats and tummy rubs.
@ArtisanTony
3 жыл бұрын
sorry, I missed this a year ago :)
Great tips in this video! Thank you!
@ArtisanTony
3 жыл бұрын
Thanks! :)
I like the slide correction. Good tips. Too late for me.., I already bought the three hole mount brackets a few days ago. I was going to block out between the studs anyways for the sake of even and sensible placement of the brackets…so no big whoop. My realtor told me to install a railing in prep to sell.
@ArtisanTony
Жыл бұрын
You can swap them out :) I really don't like the two hole ones. It seems you always have to angle one screw to catch the stud. and it's too close to the stud to put an anchor. I am sure it will turn out fine :)
How would you feel about using a dowel or two to join a connection like this? I’m not a woodworker just curious if that could be a practical approach.
@ArtisanTony
2 ай бұрын
This CA glue is a permanent bond, you cannot pull it apart. You will split or pull apart the other wood first :) No dowel or nails needed. The point of this glue is no fasteners are needed and it quick! Thanks!
@msk3905
Ай бұрын
@@ArtisanTonywhat brands CA glue do you and why not wood glue?
Where's the video for installing it?
Thumbnail got me, lol
Is there a part 2?
And where is "part 2" ?????
After painting and mounting the rail, should the ends against the wall be caulked?
@ArtisanTony
4 жыл бұрын
I don't like caulk but if you like it fine :)
@den-yc3hv
Жыл бұрын
A little late on this ,but not on stain grade .
How do you handle the transition mite from stair handrail to horizontal at landing? Thanks
@ArtisanTony
7 ай бұрын
In residential, that transition is not required but for commercial work where ADA applies, you can miter it for the horizontal transition for about a foot then turn to the wall. Thanks!
🤣🤣🤣 "See that big Honker"
@ArtisanTony
4 жыл бұрын
haha
razor scraper for stickers
What size drill bit did you use? 1/8”?
@ArtisanTony
10 ай бұрын
I think it's 3/32, just bit smaller than the threads.
Ottyzan Tony!!!
@ArtisanTony
Жыл бұрын
lol
Part 2?
tip for u.....quik set ca glue, and trim screws with small heads ffs.. why are you putting them big honking screws in a finished rail?
@ArtisanTony
7 ай бұрын
I didn’t gave any on hand, calm down dude lol
I've said it before... ALWAYS show the finished result first and then show how it was done. You did great right up until you forgot to include the big payoff. Ah, well... HA!
@ArtisanTony
4 жыл бұрын
well make a video and show us how it is done pro lol
@ArtisanTony
4 жыл бұрын
oh snap, i checked your channel and you have created nothing. maybe try doing it first then criticizing others.
@andrewsworkshop
2 жыл бұрын
@@ArtisanTony lol. Well said.
Do I only need to add one screw to the return handrail?
@ArtisanTony
2 жыл бұрын
I am always afraid to add more than one trim screw due to the possibility of splitting the rail but we glue it also which I don't remember if we show or not. The screw holds it until the glue dries.
@juanrivera5434
2 жыл бұрын
@@ArtisanTony I am in the process of building my handrails, and so far, the glue and single screw are working... thanks!
@ArtisanTony
2 жыл бұрын
@@juanrivera5434 awesome :) the will work as long as no one puts excessive force on the return :)
Yay!!! I beat Tony!!!...oh wait...wrong channel...lol
@ArtisanTony
5 жыл бұрын
LOL
did I miss part 2?
Too bad you never heard of spring bolts
Yeah, those tags suck!