This video was hella helpful. The plastic blade guide flew out of my trimmers (while I was at work 😭) and I tried watching other videos to help me 😂😂 but yours was the best!

@cloudsdiamondsharpening3973

7 жыл бұрын

Maruida Meower np, awesome I'm glad it helped you. Thank you for watching.

TY for this video, when adjusting the blades, that white piece popped out and I couldn't figure out how put it back until this vid.

@cloudsdiamondsharpening3973

6 жыл бұрын

No problem. Im glad i can help you and thank you for watching.

Magnificent video ,well explained by a teacher in how to repair this little trimmer.. thank you.

@cloudsdiamondsharpening3973

4 жыл бұрын

Thank you for watching the video and commenting. We appreciate the feedback.

Thank you so much, you helped me reassemble it after accidentally disassembling it too far😂😂

@cloudsdiamondsharpening3973

5 жыл бұрын

Np. Im glad I helped you. Thanks for watching.

@heishantao1

4 жыл бұрын

Me to! Great video, cheers dude!

Thank you, I dissembled them and forgot how to put back the silver spring . Your video was the only one that helped me. I wish they taught stylist how to do this in beauty school.

@cloudsdiamondsharpening3973

2 жыл бұрын

You are welcome and thank you for watching. Yes I plan on being able to teach stylist schools and dog grooming schools how to take care of their equipment. Hopefully in the near future

Bro good looking with this video 👍🏼 helped a lot

Great work brother

@cloudsdiamondsharpening3973

8 жыл бұрын

+Tomekina Ofa Thanks for watching.

Good video was going to bin mine as the spring came out but back up and running

@cloudsdiamondsharpening3973

6 жыл бұрын

Satbox Man np. I'm glad it helped you. Thanks for watching.

Thnx u this is the only one i found that helped and easy and made since, thnx

@cloudsdiamondsharpening3973

5 жыл бұрын

Np. Glad I could help and thank you for watching

OMG thnx dude, u saved my Life.

Great work brother thanks for your help

@cloudsdiamondsharpening3973

4 жыл бұрын

thank you and no problem . Thanks for watch

Thank bro! Just saved me money buying a new set! 🤙

@cloudsdiamondsharpening3973

4 жыл бұрын

Thanks for watching.

boy you just saved my life lol, good look yung yung

Thanks for the video 🙌

@cloudsdiamondsharpening3973

7 жыл бұрын

BoyTo2Nice np. Thanks for watching

Thanks for helping me out!

@cloudsdiamondsharpening3973

4 жыл бұрын

You're welcome!

Thank you so much this really helped me

@cloudsdiamondsharpening3973

3 жыл бұрын

Thanks for watching!

Very helpful thank you

@cloudsdiamondsharpening3973

8 жыл бұрын

No problem. Thanks for watching.

Thanks nice video

great video

@cloudsdiamondsharpening3973

7 жыл бұрын

Larry The Barber Man thank you and thanks for watching.

Just what I needed. Thanks.

@cloudsdiamondsharpening3973

9 жыл бұрын

+Ryan Mascaro No problem. Glad i can help. Sorry about the loud music.

These are my favorite liners of all time. I bought 4 of them and every single one cut amazing right out the box. I was able to get sharp lines on kids and adults without scratching them. Only problem is that the housing is very cheaply made. Every single one broke by where the blades go. When I got down to the last one, i treated it with extreme care, laying it down softly taking them out lightly and they still broke.

@cloudsdiamondsharpening3973

6 жыл бұрын

YouAwakeYet ya they are fragile but are very good getting the job done.

Hi thnx for reply i put those back together now they are loud and not cutting dk what i did wrong ugh!!!!

as I was opening and removing the motor the red and black wires came off...is there any diagram to show where it should be soldered any help appreciated the one ine the video is not the same {switch} as I am in uk

Awesome video man. I had the same problem with my whals and your video really helped.

@cloudsdiamondsharpening3973

7 жыл бұрын

Thank you and np im glad it helped you out. Thanks for watching

Does anyone know the color bands on the Inductor? I think they are brown, green, brown. I'm trying to fix it. But if it doesn't work out I guess I can order a new PC Board. Thank!

This was helpful. What size/type are the 2 tiny screws that go into the 'under blade'? Mine have worn out the threads. Thanks

@cloudsdiamondsharpening3973

8 жыл бұрын

+classic1984 I do not know the sizes sorry. I order thru a Clipper distributor. I have an account to buy them and have to order over $100 minimum. Your can google im sure there is of part sellers.

greetings great video! i was wondering, any advice of where i could buy 3 scews because i ACCIDENTLY dropped my Tpro and well i dont know how but the screws just came off now i need three of them! PLEASE REPLY!!!!

@cloudsdiamondsharpening3973

7 жыл бұрын

Jesús Maldonado hello and thanks . you will have to search in google for a Wahl distributor.

I plugged a us trimmer into a uk 230V socket and it blew. Do you know what parts would need replacing and where i could get them?

@cloudsdiamondsharpening3973

4 жыл бұрын

I would encourage you to just buy a new clipper.

I have a model 8991 the silver and black sterling stylist trimmers, and I'd used them all of 3 times before they shorted out on me while trying to blend a very thick haired client. Any tips on this exact model would be appreciated because I'd rather tinker with it than buy a whole new one because it's still in perfect condition

@cloudsdiamondsharpening3973

4 жыл бұрын

Hi. this model is 8081 but i think yours will take the same parts but you have a different model number bc of the color. You should send back for warranty .Either the switch fuse blew out bc of the resistance from the thick hair or to much oil got inside of the motor and shorted the motor out and blew the switch fuse out. If you order a new switch i recommend putting a new switch in it and after hooking it up by soldering it to the motor and cord, have it in the on position. Plug it in for a half of a second and unplug it. if it makes a burning sound then it'll need a new motor to bc the motor got toasted by the oil and will blow out the new switch fuse again.

Awe man... I should have watched this video BEFORE throwing mine away. Oh well. Good video dude.

@cloudsdiamondsharpening3973

8 жыл бұрын

+Royalty-Free Beats by Remi QX thanks for watching.

Where can i get one of those cases? The little tab the tension spring rest on, broke in mine..

@cloudsdiamondsharpening3973

7 жыл бұрын

Idada Edwards a Wahl distributor will have them.

Thanks God for this video, save my day 😎👍🏾

@cloudsdiamondsharpening3973

3 жыл бұрын

, awesome no problem and thank you for watching

Please I need the setting cover mine is bad. You have really help me that great job. How can i order it please help me.

@cloudsdiamondsharpening3973

6 жыл бұрын

Roland Tata hello. Np. Do a Google search for Wahl distributors and find the company you want to buy it from. Thanks for watching.

Hi Freind i need that plastic replacement full set

@cloudsdiamondsharpening3973

2 жыл бұрын

Hello. You'll have to find a Wahl distributor

me acaba de pasar lo mismo se me a caído la maquina y se a roto la carcasa de la parte inferior. si hay alguna persona que me pudiera decir en donde puedo encontrar una nueva carcasa inferior de la wahl de la misma marca de la que se ve en el video; se lo agradecería mucho si alguien me enviara la dirección de la pagina donde pueda conseguir

great video.. but how to solve the problem with the blade moving and the screws are tight as can be?

@cloudsdiamondsharpening3973

7 жыл бұрын

Hello . Thank you for watching. If the cutter blade is moving then you will need to buy a guide for the blade if they are available or buy a new blade. If the whole blade is moving around on the trimmer then you will need to open to see why the metal inserts are moving and may need a bottom housing to fix it. Hope i helped

Help! I was screwing the blades back in and i tightened it too much and nownmy screws or blade will come out.. any suggestion?

@cloudsdiamondsharpening3973

3 жыл бұрын

It's possible that it cracked the housing that holds everything together. Take the blade off and check the housing under where the blade sits. If you see any cracks, that's your issue.

how to put spring back in wahl color pro the black spring popped out and cant get it back in right

@cloudsdiamondsharpening3973

4 жыл бұрын

if it doesnt go back in easily the bottom case is probably broke or about to break

my tension spring will not curve in when i put the cam follower on its pointing straight up and it dosent slant foward

@cloudsdiamondsharpening3973

2 жыл бұрын

Hello. If the tension spring is not keeping its tension it's because it is broken from the housing you will need to replace the bottom housing

where can I find the casing or housing? I am having trouble finding it . Thanks

@cloudsdiamondsharpening3973

8 жыл бұрын

+Emilio Almenas I answered your email. Thanks for watching.

Nice work! but can you please! make a video on how to set and sharpen these. I sharpens my owns but no success at all but it's decent when cutting but I need consistent crispness. lol thanks!

@cloudsdiamondsharpening3973

8 жыл бұрын

+Preston Henderson Thank you. Haha that is a hard question to answer without out knowing what equipment you use. I've trained lots of people and its not as easy as it looks for them to figure out. You have to have the right pressure pushing on the blade without hollowing out to much in the middle of the blade. You have to pull the blade off the spinning wheel correctly without damaging the teeth, if not pulled off evenly it won't cut all the way across the blade. Never use a stone it has no shape to it and blades need that to cut correctly.. I have videos of me sharpening on my equipment, on my channel and my website. Thanks for watching.

@SEXYSLIMJIM01234

8 жыл бұрын

Cloud's Diamond Sharpening see that's the issue for me... I've been looking around for a machine but it gets very costly. But I use my 6" tri-hone sharpening system and it work for my andis gtx blades but wahl's....no luck!

@cloudsdiamondsharpening3973

8 жыл бұрын

do you know where on the blade the hair snags on? Middle? or edges?

@SEXYSLIMJIM01234

8 жыл бұрын

+Cloud's Diamond Sharpening I know that it's not pulling any hair... I'm kind of curious about how exactly to sharpen the actually cutting blade it pretty much the issue on my end. I wish you could train me on this visually.👌

@cloudsdiamondsharpening3973

8 жыл бұрын

+Preston Henderson i sharpen the comb and cutter on my same wheel. Each side need to match to each others pattern. Sorry i cant help more.

Mines became very loud for some unknown reason while I was about to line my hair. They're almost brand new, only used them a few times and never dropped them. They were quite and smooth, now they're not. Any ideas on whats causing this?

@cloudsdiamondsharpening3973

8 жыл бұрын

+romedc Well hard to diagnose in a message. Check and make sure there's tension on the blade. If there is not it is the bottom case. It can be the blade guide is melted. It can also be the blade needing a sharpening and re-polish its surface. It also can just need oil on the blade. If all that is good then it will be a shot bearing in the motor and will need to be replaced with a new motor. If there not very old send back to Wahl for warranty. Well.Well good luck and have a nice day.

@romedc

8 жыл бұрын

appreciate it man thanks

@cloudsdiamondsharpening3973

8 жыл бұрын

No problem

hey how much u charge cuz my Wahl detailer burnt out I was wondering how much it was so you could put a new motor for me

@cloudsdiamondsharpening3973

8 жыл бұрын

+Christopher Diaz Well usually that problem happens from not oiling your blade and the motor has to work harder. It over heats. You will need to replace pcb with the motor. Have you ever got the blade sharpened? If not it will need to be done.

where I get the plastic nice video 😃👍💈

@cloudsdiamondsharpening3973

8 жыл бұрын

At a Wahl distributor. Thanks.

@alexstokes1675

7 жыл бұрын

yea

my detailers make a popping sound in the motor or blade when turned on, I do keep them oiled.

@cloudsdiamondsharpening3973

8 жыл бұрын

+33craigcarter It will either be a motor or a cam drive.(the piece that moves the blades). Good luck.

Where did you get that grey back piece from

@cloudsdiamondsharpening3973

7 жыл бұрын

Jacob Nunez I do not no it was the customers. they bought it and sent to me. try a Wahl distributor.

Please where do i buy the in set case ?

@cloudsdiamondsharpening3973

6 жыл бұрын

Vikk U most Wahl distributor will have them. Or you can try fort Worth shaver and appliance or pet edge or Robbie's vet supply

If the fuse blows out where can i get another fuse?

@cloudsdiamondsharpening3973

8 ай бұрын

Im not sure if they're available any longer.

Pls the buttom part you about change where can I get it

@cloudsdiamondsharpening3973

6 жыл бұрын

Laotus ola hello. Google search Wahl distributor near you.

Why do I feel like playing Zelda after watching this video.

@cloudsdiamondsharpening3973

6 жыл бұрын

divined21 hah

@emanuscriptgraphics

6 жыл бұрын

Truth lol

How often do you sharpen your blade?

@cloudsdiamondsharpening3973

6 жыл бұрын

Ronald Cheatham it depends on who sharpens it and if you use oil and how many times you use it.

I lost the screw from the shaver head inside part what size is it

@cloudsdiamondsharpening3973

6 жыл бұрын

F Ahmed I have no idea what screw your talking about but find a Wahl distributor and tell them the model number and what screw you need. Thanks for watching

@Tl2IGGERtv

6 жыл бұрын

Cloud's Diamond Sharpening hi its the blade screw from the underneath used to adjust how aligned the blade is, i have looked everywhere but cant find the screw size or the part

@cloudsdiamondsharpening3973

6 жыл бұрын

hi, ok . Its the same screw on a andis outliner blade screw. I dont sell parts. I just fix them. Google search for a wahl distributor. Or you can try fort worth shaver and appliance.

What website can I buy the Bottom case from

@cloudsdiamondsharpening3973

7 жыл бұрын

Simon Ramirez Google search , Wahl distributor. There are a lot of them.

My Detailers won't turn on for some reason. Switch seems to be broken and wont power the trimmers. What do you think it could be?

@cloudsdiamondsharpening3973

8 жыл бұрын

+Anthony Garcia Hmm. I don't know. How did it break? Did the physical switch break? Did the pcb blow a fuse? Do you oil your blades? How old is it?

@AnthonyGarcia-hn3jx

8 жыл бұрын

+Cloud's Diamond Sharpening it's not that old at all ..about 6 months old . At first the switch started acting up and getting stiff and then it wouldn't power on at all.

@cloudsdiamondsharpening3973

8 жыл бұрын

Anthony Garcia Since it sounds like the physical switch. If you replace the pcb/switch board it will work but if the fuse is blown out you will have to replace the motor also to prevent a new switch shorting out. I am not responsible if I am wrong. I can fix it if you can't. Good luck.

@AnthonyGarcia-hn3jx

8 жыл бұрын

+Cloud's Diamond Sharpening Yea I'm pretty sure its the switch board because the switch won't budge either stays on one side. Could you email me @ anthonyg3295@yahoo.com because i need them fixed asap

@cloudsdiamondsharpening3973

8 жыл бұрын

+Anthony Garcia www.diamondedge2015.com for all the details. My dad past away and i have a memorial so to be honest i can't promise 24 hour turnaround. But i can fix it for sure. Maybe same day or maybe not.

One of my inserts is loose and I just got them about 3 months ago and I take good care of them, never dropped them or anything bad can you help me please?

@cloudsdiamondsharpening3973

6 жыл бұрын

Amin Sturges Hello, you over tightened the blade screws and it broke the inside of the case that holds the inserts from moving

@imeanbiz7572

6 жыл бұрын

I took them apart and yea ur right but I swear I didn't tighten them to hard what I realized is that the detailers case is cheaply made. They are made to wear out within a couple months. Bad investment when they have so many better clippers.

@imeanbiz7572

6 жыл бұрын

Thank you btw

@cloudsdiamondsharpening3973

6 жыл бұрын

Amin Sturges np and thank you for watching

Where can I get that replacement cover. I almost threw it away.

@cloudsdiamondsharpening3973

8 жыл бұрын

you have to find a Wahl distributor.

@harinathmr5645

5 жыл бұрын

I am from India where can I get that replacement cover. Plz send some contact r link plz .that detalier brought fro USA

anybody in the comments. The power (red wire) on the rotor motor detached from the mother board. (green board) how do I reconnect?

@cloudsdiamondsharpening3973

5 жыл бұрын

Solder gun and solder it back on by heating up the liquid metal

@telescope2067

5 жыл бұрын

@@cloudsdiamondsharpening3973 link to a good (but affordable) solder gun?

@cloudsdiamondsharpening3973

5 жыл бұрын

anyone with a temperature gauge so you dont melt the pcb

the motor for the wahl detailer

@cloudsdiamondsharpening3973

8 жыл бұрын

+Barber Toolz I do not sell parts. Try google.

Hi bro, where can I get spare case for my Wahl hero please?

@cloudsdiamondsharpening3973

8 жыл бұрын

Hi. You can not get them. After the warranty is out it can not be repaired. No parts available. If it is in warranty, they will replace it.

@tobisobitan

7 жыл бұрын

Thanks

@cloudsdiamondsharpening3973

7 жыл бұрын

Sobitan Oluwatobi Wahl hero's have no parts available. sorry all you can do is buy a new one.

My blade doesn't come off no matter how hard I pull what do I do?

@cloudsdiamondsharpening3973

6 жыл бұрын

northweezie1 hello. The blade inserts are turning inside the case. So you will have to take off the top of the case and use needle nose plyers to hold the nut from turning and then you will need to replace the housing.

how.can i make those more powerfull

@cloudsdiamondsharpening3973

7 жыл бұрын

You cant make them more powerful unless you mess with the voltage. You can have them cleaned and sharpened. It will make them like new if nothing is broken on them.

@scottythebarber2596

7 жыл бұрын

how can i contact you ??

do you have motors for sale?

@cloudsdiamondsharpening3973

8 жыл бұрын

+Barber Toolz Nah sorry

@BeautyofScent

7 жыл бұрын

Do you recommend the detailer or the andis t outliner?

Hey Bud where can I purchase that burgundy back cover, where did you buy your replacement parts? any help will do, thanks!!

@cloudsdiamondsharpening3973

7 жыл бұрын

Juan Gonzalez you will need to search online for a Wahl distributor. Sorry I don't sell parts. I just fix them.

HEY. Friend.

@cloudsdiamondsharpening3973

3 жыл бұрын

Hello

How do I contact you I need mines fixed

@cloudsdiamondsharpening3973

5 жыл бұрын

Www.diamondedge2015.com

@blaccSea

5 жыл бұрын

Bro at 4:15 on the video my lil thing's feel off into the trimmer & weren't catching the screws any help?

where can i contact

@cloudsdiamondsharpening3973

7 жыл бұрын

www.diamondedge2015.com

Music was a nice touch :/

@cloudsdiamondsharpening3973

4 жыл бұрын

Thanks for watching

Sick video but cant stand the music hahah

@cloudsdiamondsharpening3973

8 жыл бұрын

+CycloneProofProd. C2P Well sorry about that. Its free music and wont get me blocked. Thanks

@jaiuzy

8 жыл бұрын

+Cloud's Diamond Sharpening Your still the man though!!

I thought once it broke it was done

@cloudsdiamondsharpening3973

8 жыл бұрын

+Tomekina Ofa Nope not done, you can actually get every part on the clipper.

@edgarcrispin4846

8 жыл бұрын

where can I order or buy that piece at mine broke for some reason.

What's up with the Conan the barbarian music.

@cloudsdiamondsharpening3973

6 жыл бұрын

BigSerg80 it's free music and I have a lot of videos.

lower your music. hard to here you

@cloudsdiamondsharpening3973

7 жыл бұрын

Jak Coleman buy treble speaker. thanks for watching

@jjcoleman367

7 жыл бұрын

Cloud's Diamond Sharpening Hi dont have this trouble with anyone else. its just ur back ground music is a little high over ur voice. i like you video. was just hard to here at times. thanks

@cloudsdiamondsharpening3973

7 жыл бұрын

np. Sorry for your troubles. you might try my other video of this trimmer. This video is almost 2 years old and i was new to making video's. kzread.info/dash/bejne/iWGrzcd-ktCafc4.html

@jjcoleman367

7 жыл бұрын

Cloud's Diamond Sharpening oh right lol. i didnt realize. thank you. i will do that.