Those W5's are impressive for sure!

@Robs-Garage-experiments

11 ай бұрын

Thanks. I like them. Low lift is a little weak.

another visit I noticed the extra material at the top of the W-5 head over the intake. I wonder can the roof be raised much more for a serious race engine?

@Robs-Garage-experiments

7 ай бұрын

Excellent question, I don’t know the answer. Brett Miller would know.

I like both sets Rob, are they set up for mechanical roller ?

@Robs-Garage-experiments

11 ай бұрын

Yes!

Nice , are either one of those for sale anymore?hughes doesnt say they have , and i dont see any W5's anywhwere.

@Robs-Garage-experiments

11 ай бұрын

I e had these Hughes BM heads for a long while now. I was about to build up an engine but, life got in the way. Stupendously!!! The W5 has been discontinued for a very long time now.. I would suggest ether the new Trick Flow head for a street strip engine or an Indy head.

@smilsmff

8 ай бұрын

@@Robs-Garage-experiments Thank you I bought trick Flows 190 cc,I would like to see a flow test by them too. not much inofrmation out there.One guy posted videos of dyno tests and results with race gas and then E-5 , but he removed all the videos

@Robs-Garage-experiments

4 ай бұрын

The Trick Flows are an excellent head.

Hey brother man what’s the rocker part #Number of them

@Robs-Garage-experiments

6 ай бұрын

The rockers aren’t in front of me now. There up at Charlie’s now. But I suppose you want the numbers to get a set. Just know they are not made anymore. Used is the only option. Get new rockers from TD, Jesel or Harland Sharp.

I wonder what the combustion chambers look like.

@Robs-Garage-experiments

11 ай бұрын

I’ll show in a video, sorry about that.

@davidreed6070

11 ай бұрын

@@Robs-Garage-experiments I noticed there is no pushrod pinch in the ports, they should make good power. The mopars bore spacing is wide a person should be able to stretch them to close to 500 inches. I've never seen what those engines will do maxed out power wise.

@Robs-Garage-experiments

11 ай бұрын

@@davidreed6070 I agree they "SHOULD" make some good power. I was bummed when the port gave up andithad to have epoxy used in it. It is what it is., The largest I have read a SBM can go is 472. Anything beyond that has to be creative or just simply have a block meaty enough to take a bore size to help get there. IIRC, a "Ritter" block would do the trick, *I Think!*

@Robs-Garage-experiments

11 ай бұрын

W5 Chambers show inthis video below; studio.kzread.infoZ3Yauof2Pns/edit

@davidreed6070

11 ай бұрын

@@Robs-Garage-experiments not many people take them all the way like they do SBCs , but there is no reason they won't make big power

Of the crane rocker

@Robs-Garage-experiments

6 ай бұрын

The rockers aren’t in front of me now. There up at Charlie’s now. But I suppose you want the numbers to get a set. Just know they are not made anymore. Used is the only option. Get new rockers from TD, Jesel or Harland Sharp.

@juanperez-gw3tp

6 ай бұрын

@@Robs-Garage-experiments if you going to update to a different one I will buy doses one or if you know someone that has a set let me know I have w 2 racing head new

@Robs-Garage-experiments

6 ай бұрын

@@juanperez-gw3tp Hi Juan. I'm not sure what your saying or asking.

@Robs-Garage-experiments

6 ай бұрын

@@juanperez-gw3tp The W2 head has avilable to them rockers from Hardlaand sharp in the Econoor race head, Jesel and TD also have rockersfor the W2.

w5 they leaked like a sive

@Robs-Garage-experiments

3 ай бұрын

Sorry to read this.

@Robs-Garage-experiments

3 ай бұрын

Sorry to read this