Thank you for your videos Uriel, they are entertaining, new sub here! greetings

@UrielArtsGarage

4 ай бұрын

Thanks for the sub!

Thanks for your video. Glad you showed close ups of the expansion caps before and after install. They look to have a step on them on the outer edge and when I installed mine, I wasn't sure if they were properly seated. Basically, when installed, you will have a grove visible which makes them look not completely flush. Maybe it is a step designed in to be able to install something to pry them out.

@UrielArtsGarage

8 ай бұрын

You’re welcome! Mine are perfect dry after installing in this video. Just make sure to push all around the edges

Good vid. Will be changing mine soon. Did you post a link to the parts? Also, how often do you clean the throttle body?

@UrielArtsGarage

11 ай бұрын

Yup! It’s a kit so everything comes in one package from fcp! And I haven’t cleaned it at all, I would probably just replace it since throttle bodies aren’t too pricey! Good question

Helps Desperately Needed….I Changed My Cam Plug On My C300…Once The Engine Builds Temperature The Pressure Pushes The Cam Plug Out Causing A Leak.What Should I Do?…Do They Make A Sealant Or Something I Can Put On It To Stop The Leak?

Would the PCV vent valve cause rough idle and no check engine light? I've got slight vibrations only on idle :)

Good video. I 've ordered my parts from local MB dealer.

@UrielArtsGarage

Жыл бұрын

thank you and oem parts are a must for these cars!

@wstarsx

Жыл бұрын

@@UrielArtsGarage just had the job done today. Btw, we are members of the same group in FB. You once said that our cars look identical. But right now I can't remeber which W204 group is that haha.

@UrielArtsGarage

Жыл бұрын

@@wstarsx the w204 north east I believe! I'm in a few!

Thanks for the video i have problem with breathing valve the last one you replaced the problem is that the middle diaphragm doesn’t fit into the oil pan pipe and it appears as impending tear how did you fit this part ?

@UrielArtsGarage

8 ай бұрын

are you referring to the crankcase oil separator? Here's a full kit from fcp euro that may help you visualize. www.fcpeuro.com/products/mercedes-crankcase-breather-repair-kit-oem-515810

@gavejoke

8 ай бұрын

@@UrielArtsGarage yes the crankcase oil separator as the diaphragm in the oil separator doesn’t fits into the oil pan plug

What’s your method for keeping your engine bay clean?

@UrielArtsGarage

Жыл бұрын

Power wash and engine degreaser! Just make sure you cover the alternator and intake with a thick towel!

What was the part you are waiting on? That common causes of leaks too?

@UrielArtsGarage

7 ай бұрын

Cam magnets! next video after this! the front end of the engine!

6:07 does that mean you’d have to change the gasket again or it can be used like that?

@UrielArtsGarage

Жыл бұрын

The new crankcase vent comes with a new gasket! Always get rid of the old one!

@tiekuasare3999

Жыл бұрын

@@UrielArtsGarage interesting. Thanks 🙏🏽