This is the best video I’ve seen explaining everything! Thanks :)

Looks perfect. Thanks for the tutorial, can't wait to do mine.

When it comes to setting up the measurements and hight of the front and back coilovers how did you measure this to be even from front to back

Are you going to eventually put a catback exhaust on the car?

how much did you drop from stock height on both front and rear?

How far out from the bottom did the front strut poke from the knuckle, I’m running these same coilovers abs they keep ripping boots

Nice vid keep going…support from the USA 💪🏽

New bilstien rear shock top mounts are like £11 each, probably worth buying and adjustable drop links are like £30

Looks good, nice looking Jetta.

Are the shocks adjustable aswell ?

is your top hat flush with the car on the ground?

Yeah I'ma cut one spring of them I need it lower

how much was the coil overs and where did you get them.

where did you get the wheels from?

Who do you know that can hook up the discount on the coilovers in California

Awesome video! For those VW Jetta MK4 enthusiasts out there (that have experience with various coilovers), what is the best suspension system for a daily drive VW JETTA GLI 2004 2.8L VR6 24v (BDF) six speed. H&R, Bilstein, KW, Koni or KSport, or perhaps a mix and match, or something else? I want quality materials, able to go low (at least 2") and not too stiff. Any opinions out there? Please reply to my message.

@2sik_UK

Жыл бұрын

Would have thought bilstein would be a shout

Are these 17" wheels?

Great video Bro

I have the same wheel gap and it looks horrible

How can I get the 50$ discount?

Would stock ride height be 60mm? I'm going to be doing a suspension overhaul on my Jetta and I've found that all the stock components end up costing the same or more than a coilover setup. I just want stock ride height. Cheers!

@tomchillen3039

2 жыл бұрын

Jared

a parts link would have been appreciated.. thanks for the how to

Dig those wheels

How to do up that nut after the rubber top mount? Do you have to hold the shaft? Same as the top nut? Every video people leave this out and don’t show you.

@6ty8stang

3 ай бұрын

You either clamp the shock rod with vice grips or buy a strut nut tool and use a Allen wtench

Love the tru BORA. I'll trade you some BBS rims for Bora

Yeah I won’t be able to do all that I’ll need someone to do it for me

miss the cv 2800 videos

You should really mention that every single nut/bolt you took out is TTY and should absolutely be replaced! Other than that, very helpful video, I appreciate it!

@tomchillen3039

2 жыл бұрын

What does TTY mean?

@YvngQ

2 жыл бұрын

@@tomchillen3039 torque to yield

@YvngQ

2 жыл бұрын

@@tomchillen3039 also known as a "stretch bolt" , they're only meant to be used one time

@chasepatesel7118

Жыл бұрын

Well idk if you know but there is no such thing as a tty nut...sooooo you are wrong...and none of use are going to replace EVERY single bolt we take out when we work on our cars..some of them should be replaced..some don't need to be..good day

Would it be similar install to the wagon

@geradus1985

3 ай бұрын

yes

Great video! My only concern would be using an impact gun on the top strut nut during final install / torque as it will cause the shaft to rotate inside the strut and could theoretically cause damage from what I understand. Proper procedure would be to counter-hold the strut center shaft while manually tightening the top nut to proper torque spec. Otherwise great instructions!

@DANDthekid

2 жыл бұрын

Usually the non-adjustable coilovers are less sensitive to this. Where as if you were to do this with a KW, which uses a rotory style adjustable damper this would ruin it. Best practice is to what you're describing.

Nice 😎

How have these held up? I just ordered mine, hearing mixed reviews about reliability

@jaxon.frandrup

3 жыл бұрын

how have they been so far?

@tiko4621

3 жыл бұрын

@@jaxon.frandrup just fine actually, so far I’m pretty happy with em, they have me low enough and they perform OK (these are cheap coilovers don’t expect high performance). I’ve done a shit ton of miles on em so far too, probably like 10k already, I commute like crazy and do regular weekend roadtrips,so far so good.

@Humblegrind710___

2 жыл бұрын

@Ti Ko did u max them out first time or did u adjust them later

@tiko4621

2 жыл бұрын

@@Humblegrind710___ maxed out they actually rub against the front sway bar. I have the car maybe one and half finger height from rubbing front and back. Which still leaves plenty of room to adjust further. You can definitely go real low with these. Also, they are still on my car, little over 20k miles later (do deliveries in my car for work so lots of mileage) and they’re still performing wonderfully. For a budget coilover I’ve personally got nothing negative to say.

What wheels are those?

@dustinmiller8160

2 жыл бұрын

You can find the same ones at discount tire

@bigdaddyt1107

2 жыл бұрын

Awesome thanks

Can I get the referral name for the 50$ discount

Sweet video. Do a follow to see if she is still riding great.

1st

who cares what camera you're using bro, wtf are the coil overs you got???

@sometimesvincegilligansome5802

6 ай бұрын

Solo Werks….it’s in the title lol