Thank you so much! Yes, the gas pedal was tough to put on! Thank you for being so honest because it felt good to know that it was not just me!

@mrfixpl

3 жыл бұрын

Happy to help!

@BirdiesGoCherp

Жыл бұрын

I've been messing with it for about an hour and I still can't get it on. Any tips?

Thank you for a great video. I need to remove the dead pedal in my GTI to pull back the carpet. This was perfect.

Jak zwykle niezawodnie i pomocnie, jesteś głównym pomysłodawcą moich modów G7.5

Cool guide, helped a lot, thank you! Quick key notes as seen by me. Clutch and brake: remove rubber, add new metallic cover. Gas: nothing to remove (ha!), just add the metallic cover. Good to align it at the bottom and slowly work all the way up. It should hold snugly. Foot rest: Removal - just follow the video, it will guide you absolutely perfectly. Reassembly: As others said, put the locking element back into the handle and just click it on, there is a bezel made on the peg just for this easy way of assembly. All in all - easy procedure. Looks a bit more difficult than it actually is. Make sure you don't work in subzero temperatures, it makes all plastic and rubber too hard to work with.

Great instructions, just what i was looking for for installing new pedal covers on my '15 golf tsi

I just did this. Thank you!!! One thing to note, is that you can slip the little locking clip inside the hood latch handle back into place before you press the handle back into place in the last step. Also! The trim has little metal locking clips that can come out. Make sure those go back into their little clip holders before you press the bottom door trim back into place. Fun little upgrade! Took no time at all, and everything just worked. Thanks again!!

@mrfixpl

3 жыл бұрын

Happy to help and thanks for your input!

Many thanks for you kind help!!! I managed to replace all of these by myself. It was too useful!!!

@mrfixpl

4 жыл бұрын

Happy to help!

For the gas pedal soak it in boiling water for a minute or two and it loosens the rubber and makes it so much easier to

Great vid! Just installed mine. Followed your video and THTuning's vid. He did not remove the side panel since there is enough flex to get the dead pedal out. Greetings from Canada :D

@johndoe5229

3 жыл бұрын

i need the link for ThTununings videos?

For the gas pedal, start at the bottom and slowly slide it up and into the rubber track. Was the easiest one with this method, was recommended by another commenter.

@mrfixpl

2 жыл бұрын

Thanks for the tip!

@Zakw17

2 жыл бұрын

Thank YOU! This took me 5 minutes thanks to you

@BirdiesGoCherp

Жыл бұрын

How do I start at the bottom and slide it up? I can't manage to get the rubber onto both sides as I slide it.

Thank you for the helpful video I fit the footrest without remove the panel it have enough space to do the job and the accelerator pedal was the easiest you just have to fit the rubber from the bottom of the pedal and slide it bottom-up and that's it it took me 2 seconds to fit just a tip Skoda Octavia 5e combi

@mrfixpl

2 жыл бұрын

👍

@johnwet6969

2 жыл бұрын

I have to try it again and with some lubricant. I spent more than two hours and my all body was destroyed 😅 , but I was not able to fit right upper corner. So it holds only for 97%. And yes I also tried your way from bottom up.

@Mark-hu9tf

Жыл бұрын

Yes, same. Just needed thick gloves and a good yanking. No need to remove panel.

Very God job 🙂 great video. What kind of doorseal protection do you have? Also from Aliexpress?

Thank you. I didnt disassembly the entire plastics for foot rest. Just remove the screw and with hand move upper the plastic and remove the footrest. Easier and faster

Dzięki bardzo za instruktaż, dlatego poszło szybko i sprawnie. Wygląd jest o niebo lepszy. Kosztowało mnie to 48 PLN z przesyłką Pozdrawiam.

@mrfixpl

4 жыл бұрын

Cieszę się, że pomogłem!

I removed that little plastic thingy from the handle but the handle would not budge at all!! I couldn't remove the panel but fortunately you can bend it sufficiently to get the foot rest in there.

Thank you soo much it really helped

Thank you ! It helped me to instal mine on my Audi A3 spoetback 8V. Just the left plastic along the door can’t be remove as it’s one entiere pièce compare to the video. Still i succeed without struggling.

@mrfixpl

2 жыл бұрын

Glad you worked it out!

I just got these pedals for my right hand drive Seat Ibiza - it’s brand new and I need to be as strong as Arnie to pull my brake pedal cover off 😂😂

En un tiguan mk2, se hace igual? Gracias

How to get back that little thing that you took first for hood handle

Is this also the same replacement for vw polo 2018?

Did you notice the break pedal too High from acceleration pedal so can i make in same level ?

I had an absolute nightmare fitting the accelerator pedal cover and ended up using some quick detailer, spraying a little bit onto the edge of the pedal to lubricate it. The pedal cap then slid right on. Hopefully this helps someone. Don't go overboard with the detailer though, you don't want any nasty residue.

@mrfixpl

3 жыл бұрын

Thanks for the tip!

@masonclifton5236

3 жыл бұрын

Tried this an it did not help in any way. Are there any other methods?

@johnwet6969

2 жыл бұрын

@@masonclifton5236 May by some silicon or wet soap? I'm also desperate.

@MrAnko46

Ай бұрын

I propose to easy heat it. I did and it was simple to mount it

Does these fit to skoda oktavia 2016 (3)? Thanks!

cheers mate

@mrfixpl

2 жыл бұрын

✌️

Witaj. Czy robiłeś może już adaptację skrzyni biegów multitronik 0AW, w Audi. Jeśli tak czy możesz zrobić taki materiał. W internecie można znaleźć tylko opisy. Nawet na zagranicznych forach, nie ma filmu jak to zrobić. Kiedyś próbowałem z klonem vcds i coś mi go wywalało.

Hey I recently bought a 2016 Golf Mk7 Variant Highline (1.4 liter petrol 125 horsepower). It has the standard brake, acceleration, clutch pedal and foot rest. My question about the product in your video is, how is the quality after say a year of daily use? Is there any noticeable wear off to the pedals or are they in excellent condition and it might not be something to worry about?

@mrfixpl

3 жыл бұрын

Still looks very good. Foot rest is little bit scratched but overall very happy with the quality and visual effect.

@psycho636

3 жыл бұрын

@@mrfixpl alright, thanks!

How does it hold after couple of monts/years?

You do not have to remove all the trim panels for the dead pedal.

@mrfixpl

3 жыл бұрын

Thanks for the tip!

Zamieniam moje CC na Mk7 za 3 lata. Zdecydowanie😉

Eu coloquei só levantado o plastico

Are these suitable for Volkswagen Golf variant 2019?

@mrfixpl

4 жыл бұрын

I have 2016 Variant and I believe that there’s no difference between it and 2019

@user-xu4bc9ze6k

4 жыл бұрын

@@mrfixpl Thanks a lot!

Does anybody know if Mk7 golf aluminium pedal fitting is same for mk3 2016+ skoda superb fitting? Do you have link to purchase this?

@antoniobogovic15

3 ай бұрын

I think iz does

What is the differents between the original pedals please ?

@mrfixpl

4 жыл бұрын

Mostly price tag.

@andyalfieri8948

4 жыл бұрын

@@mrfixpl apart from the price ?? :) haha

@huhjieun1737

3 жыл бұрын

@@andyalfieri8948 original is alloy, this one is steel

Does the dead peddle slide down or just clip in?

@mrfixpl

2 жыл бұрын

There's a clip, i believe.

@Zakw17

2 жыл бұрын

There’s a clip

will this work on a right hand drive

@mrfixpl

2 жыл бұрын

Other than the dead pedal, it should be the same.

Czy te nakładki będą pasowały do fabii 3?

@mrfixpl

5 жыл бұрын

Chyba są trochę inne. Ale na AliExpress da się znaleźć wszystko.

Can you fit these to a VW golf mk7.5?

@mrfixpl

Жыл бұрын

I believe it will fit.

w golfie to jakoś elegancko wszystko idzie ale w seacie niech to h..j strzeli, jeden plastik który trzeba częściowo zdemontować by można było nakładkę odpowiednio wcisnąć ale wez pózniej to dobrze zmontuj

👍👍

@mrfixpl

2 жыл бұрын

✌️

Why didn't you remove the gas pedal cover before fitting the new one

@benyoung8756

Жыл бұрын

I believe you cannot remove the gas pedal cos it’s fixed. The new pedal covers over.

Zrobiłem... Masakracja 😂 Ale ta spinka tej klamki to masakra, nie założyłem jej spowrotem bo 'sie nie da' pozdrawiam

@mrfixpl

4 жыл бұрын

zakłada się łatwiej niż wyjmuje. Wkładasz ją do klamki, a potem klamka się zatrzaskuje na ośce.

@222kamil

4 жыл бұрын

@@mrfixpl okej bede próbować 😁 dzięki za odp.

Fajne 😉

iwas about to press like but itsays 911

@mrfixpl

2 жыл бұрын

Should be 912 by now 😄