You are the best...keep up the detailed explanation of what you are testing..like in this video...and you will have a lot of viewers and teach people a lot.

Hello if I do not replace injector then "adapting injector minimum deviation quanity" would be an advantage for the engine?

Did you ever check this value: Injector valve 1: capacity-CAPA_INJ_MAIN[0] and same for 2,3 and 4?

what happens if after adapting injector minimum deviation quantity it sais finished time out ? i have an vw polo 1.6 tdi 90 hp

Nice

thank you so much i learn much from your videos

can this be done correctly when car has costum ecu map?

Is this the same way for a motor

Hello, sir! If the injectors were not put in the correct order after getting them out and cleaned, it is neccessary to code them and follow these steps? My dpf it s not working anymore and i think i can skyp that step. Thank you!

Hi there, I have a VW Golf 7 GTI engine code CHHA and I changed all 4 injectors but I can't find the adaptation channel for entering the new injector codes... it is not available on my VCDS. Using version 23.3.1 Any solution? Thank you

JETTA MK6 2.0 TDI CFFB Is it possible? VCDS UDS adapting injector minimum deviation quantity

Tank yuo

I’m doing it right now, its taking more than half an hour should i stop it?

Hey, i have a Golf 7 2.0 TDI ( EA288 ) and i changed my Injektors too ( all 4x ) and i dont have the " Options " for Injektor Adaption in my VCDS. I Got the Pro Version and 100% Original. Why?

It is the same process ,even you have dpf off?

Hi When do we need this process

I have a vw golf 7 1.6 diesel CLHA engine.I put in the service code but in basic setting i can NOT find the minimum injector quantity adaptation option.Do you know why? I am using VCDS 21.9.0

@Aurimatis

Жыл бұрын

same for me. Does anyone has any ideas?

on 1.6 tdi cayb same procedure but it doesn't rev up vcds official not working clone don't working need launch or vas ?

@useruseraa885

2 жыл бұрын

@@iancartmell8252 vcds is shit for this, launch or odis is better for this

Hi good afternoon, I am about to buy from Darkside 4 new Bosch injectors for my golf TDI MK7 TDI with a CRUA engine. I would like to know if after replacing them, I will need to complete this process of adaptation? because they also have for sale this software.

@dopiaza2006

4 ай бұрын

Ask Darkside, they know everything!

Hello, befor opening injectors for my vw mk7 I numereted them from1 to 4 . I changed there rings and replace them in there order. But my car lossed 40% of here force. Why please? Should I reprogaming injectors in calculator again?

@dawidsuso5332

6 ай бұрын

Have you found a solution to this problem?

Is this the same way for a motor1.6 caddy 2012

@teovm

2 жыл бұрын

Yep looking for the same answer as i have to change the injector too. Did you try it?

The " adapting injector minimum deviation quantity "" function should be performed ONLY when replacing ALL injectors with brand new ones !

@ronhill24

9 ай бұрын

for reparation?

Is this necessary procedure when you change a injector?

@hakimbordeaux8309

4 жыл бұрын

Yes

Is this posible to do whit old software or i need to update software of my car???

@golfwagen4173

3 жыл бұрын

make only after injector replace. software VAG need new after 2016 i think

Hi mate, can a clone vcds do that or only original

@michaladamec1618

4 жыл бұрын

Hi, for full access to all function in VCDS you need one of the new HEX-V2 HQ clones that fully supports MQB platform

Its seen time a very unreliable system injector just really whent wrong with the pumps think vw needs to sort this problem out I need three new injector for my skoda yeti they say there are 2 thousand on back order stuff vw s I will never have another

Tried to do this adaptation but without dpf regeneration, waited 1h 30min and still not finished, now my car running very bad, any ideas what to do

@pubgmobile-ct9hq

3 жыл бұрын

Like you and noise

@arturs6913

3 жыл бұрын

How do you fix problem?

@modestasandrijaitis5412

3 жыл бұрын

@@arturs6913 writed pre diesel gate map file and problem gone forever

@modestasandrijaitis5412

2 жыл бұрын

@@iancartmell8252 problem is that it was diesel gate software and in the frony of maf sensor was that diesel gate fix pipe. I took it out and downgrade software to pre diesel gate version and adapted injectors just by driving it around town

PCR 2.1 ecm read write do

Hello, I have Audi A3 (1.6 TDI 2012). I have cleaned the injectors. Do I need to adapt? I tried to do it like you do in the video. But "adapting injector minimum deviation quantity" took too long and was not completed. I waited an hour, but it's not over. Can you help me with that?

@oliveruzelac6684

4 жыл бұрын

That means that you have another problem-probably egr dosnt work properly

@gunerkocak546

4 жыл бұрын

@@oliveruzelac6684 what do you think could be the problem?

@pemac9457

3 жыл бұрын

You must need every code on the injector injector 1,2 ,3 , 4reset and adaptation and start the car Insert 27971 acepted Go in basic seting adaptation amount deviation injector Pres klutch and breake release And pres pedal gas and release After 15 20 min is finsihed Ever 1.6 tdi posible work this but need software after 2016 Old software dont posible work Every ecu withouth dpf and egr (off) Dont posible working this process In this situation you need new software Services dpf and egr fixed And you have new car Thank you

@aqpe94

2 жыл бұрын

Abi original vcds al, veya biryerden ödünç al

@darkocalusic3985

Жыл бұрын

Car needs to be at it's operating temperature. Don't perform this action with cold engine.

What is the security code access for BKD engine ? Thanks

@mohamadmustafa6925

5 жыл бұрын

Security Access Key for VW AZV or for BKD engine ?

@shaiknaveedalam7208

2 жыл бұрын

Same

HELLO.i have a golf 6 1.6tdi cay motor.i have vcds and today i do the adaptation.the problem is that the car when begin the adaptation is not go 1000-3000 rpm.its 800rpm and the heater its lights on-off .after one hour the car do the same.any help?

@alicepel2992

3 жыл бұрын

Mine has the same problem. Does anyone know the solution?

@pemac9457

3 жыл бұрын

You need new software

@dimitriszafeiropoulos9007

3 жыл бұрын

I fix the problem alone.i buy a cable with vcds program and fix with minimum injector and it's ok

I want to do this by obdeleven who know what to do

This is not good for used injectors , one of my injectors has died after i did this!!!

I don't think you need regeneration after changing injector

@golfwagen4173

5 жыл бұрын

without regeneration it is not possible to adapt the minimum deviation. but I do not have verified information, I just try

@luclucian6014

4 жыл бұрын

@@golfwagen4173 hi, well? We must do the regen before of adapt? Or is not necesary?

What is that shooting in the background? Are you in a war zone somewhere?

@golfwagen4173

5 жыл бұрын

boys train

@sniper058905

3 жыл бұрын

@@golfwagen4173 Bojnícka, Žabí Majer ? :D

My fuel injection time deviation is: 53us -23us -16us -12us It's ok or not?

@aqpe94

2 жыл бұрын

First one is in plus, to high Clean your injector at a garage

@merisvilic5862

2 жыл бұрын

What are they measurment values "us"? I have read them on my golf 7 via obdeleven -12us -18us 16us 18us Is that normal?

@jakubusowicz4945

3 ай бұрын

@@merisvilic5862 Hey Did you verify your correction values? Were they OK? I have: 1. -3 us, 2. 20us, 3. 0us, 4. -18 us and sound of my engine seems to me not working perfect.

@merisvilic5862

3 ай бұрын

@@jakubusowicz4945 bro i had to change firts 2 injectors,they was bad. But i have problem again 2 years later. My New value is -10us -3us -5us 10us

I don't think you need regeneration after changing injector

@rafalbonislawski1467

4 жыл бұрын

It is necessery befor adaptation not after replaced injection