I am waiting on a new pair from amazon..about $300. Looking forward to it, I hope they are great. Cool vid, I love a DIY! I might go try this with my sander on the older ones!! Why not right!
@George-qs1jr7 жыл бұрын
Correct process is: Sandpaper should be used of 500, then 800, then 2000 with the drilling machine at 450-600 rpm. Polish at the final should be applied at 900-1000 rpm. Headlights will be fully restored.
@gras20004 жыл бұрын
It’s good to apply ceramic coating after polishing to make sure the hazing does not come back.
@klozher385 жыл бұрын
props, yeah that happens to every car around the world. When ya clean them like that the car looks new as well so its a Double WIn. Maybe just start with the compound next time. And hell yeah removing the light from the XC is CRAZY Eeeeeezeeee
@kenhweetan2458
3 жыл бұрын
Wonder if the Japanese melamine cleaning sponges, which are actually abrasive, would have worked...
@hoovermaster7 жыл бұрын
That's amazing! I need a pad for my hoovers lol
@EnricoSWE4 жыл бұрын
Man. I have been looking everywhere for how to clean the INSIDE of these headlights... There is a lot of smudge there and I can't seem to open it to reach from the inside...
@doraemeah34245 жыл бұрын
In the kitchen of course, my missus would've had my guts for...
@danlong6311
5 жыл бұрын
Mine did lol
@prambo46534 жыл бұрын
🤔🤔🤔👍👍👍👍
@pilgrim.56307 жыл бұрын
Most of my gunk is inside the headlamp, is it possible to separate the two halves or do I have to use the magnets in a sponge ?.
@danlong6311
7 жыл бұрын
hi, one of mine has gunk on the inside too, i know that my discovery headlight can go in the oven for 7 minutes or something and it melts the glue. you can then pull the lens off and get to the inside. when finished u simply re glue and bake again to cure it!! ill find out the time and temp and try it on my vovlo light
@foytdie6128
6 жыл бұрын
I havnt done this on my xc90 yet, but on my grand prix i had to pry the headlight housing apart to do the inside, it came apart ok but then i had to use a silicon type adhesive/sealant to get it back together again. (comment more for future readers with the same question, since you asked 8 months ago)
@jlewis68873 жыл бұрын
Don’t sand in circles
@wilku33503 жыл бұрын
not a big diffrence looks like s...............
@johanzh25506 жыл бұрын
destroyed
@danlong6311
6 жыл бұрын
Johan Schröder hi, can you please elaborate on your comment?
Пікірлер: 17
I am waiting on a new pair from amazon..about $300. Looking forward to it, I hope they are great. Cool vid, I love a DIY! I might go try this with my sander on the older ones!! Why not right!
Correct process is: Sandpaper should be used of 500, then 800, then 2000 with the drilling machine at 450-600 rpm. Polish at the final should be applied at 900-1000 rpm. Headlights will be fully restored.
It’s good to apply ceramic coating after polishing to make sure the hazing does not come back.
props, yeah that happens to every car around the world. When ya clean them like that the car looks new as well so its a Double WIn. Maybe just start with the compound next time. And hell yeah removing the light from the XC is CRAZY Eeeeeezeeee
@kenhweetan2458
3 жыл бұрын
Wonder if the Japanese melamine cleaning sponges, which are actually abrasive, would have worked...
That's amazing! I need a pad for my hoovers lol
Man. I have been looking everywhere for how to clean the INSIDE of these headlights... There is a lot of smudge there and I can't seem to open it to reach from the inside...
In the kitchen of course, my missus would've had my guts for...
@danlong6311
5 жыл бұрын
Mine did lol
🤔🤔🤔👍👍👍👍
Most of my gunk is inside the headlamp, is it possible to separate the two halves or do I have to use the magnets in a sponge ?.
@danlong6311
7 жыл бұрын
hi, one of mine has gunk on the inside too, i know that my discovery headlight can go in the oven for 7 minutes or something and it melts the glue. you can then pull the lens off and get to the inside. when finished u simply re glue and bake again to cure it!! ill find out the time and temp and try it on my vovlo light
@foytdie6128
6 жыл бұрын
I havnt done this on my xc90 yet, but on my grand prix i had to pry the headlight housing apart to do the inside, it came apart ok but then i had to use a silicon type adhesive/sealant to get it back together again. (comment more for future readers with the same question, since you asked 8 months ago)
Don’t sand in circles
not a big diffrence looks like s...............
destroyed
@danlong6311
6 жыл бұрын
Johan Schröder hi, can you please elaborate on your comment?