Volvo L90H 2.0 | Loading Volvo and Scania trucks with 32-64 mm gravel
Автокөліктер мен көлік құралдары
Not even a year old L90H, loading a Volvo FH, an FMX and a Scania R520 with 32-64mm material.
It was dumped out on the road, and then milled into the surface by a Wirtgen WR2400 (No video on that job)
2022-09-05
Visit us at Facebook, Bm & Rille / bmrille
00:00 Loading Volvo FH with Briab waggon/trailer
07:18 Loading Volvo FMX Hooklift
10:15 Loading Scania R520 Hooklift with Högstad waggon/trailer
#scaniav8 #v8 #lastbil #truck #lastväxlare #hooklift #l90h #swecon #volvoce #lastning #construction #entreprenad #roadconstruction #roadconstructionwork #loading #wheelloader #hjullastare #lastmaskin #radlader
Пікірлер: 15
Awesome video, showing gravel being loaded from the stockpile of gravel. Nice camera angle and you can hear the material hitting the truck bed.
Nice video - good operator not charging the pile and spinning the tires, always amazed at the load they put on the trailers versus the trucks. Cheers and have a great weekend
@RilleS88
Жыл бұрын
Yes it´s a big difference between truck and trailer. A hooklift as the Scania in the end can take about 15-16t and if i remember right he took 32t on the trailer so more than double!
Супер техника 👍👍👍
Nice video
Great video but needs a bigger loader to much passes to load trucks
@RilleS88
6 ай бұрын
The job is on hour´s, and not ton´s. So it´s not needed
Lite klen maskin att lasta ut med, blir måånga vändor innan lass. Borde vara smartare med minst en 120 😊. bra filmer som vanligt 👌
@RilleS88
Жыл бұрын
Jo en 90 blir ju i minsta laget, men dem kör på timme och inte ton så det funkar. Men det blir ju en del skopor, absolut!
@banda2200
Жыл бұрын
Håller med dig , jag lastar ut runt 1700-1800 ton per dag i en 180H ,många skopor blir det i en l90 vill jag inte ens tänka tanken ,men det är väl inte dom volymerna heller ,bra filmat och kört för övrigt😉
@jojjekalle635
Жыл бұрын
@@banda2200 ja de där är ju nästan larvigt, visst 5 lass går väl i brist på annat😂. Även om de ä timpeng på de så är ju ändå större maskin att föredra 😊. Ja 180 in får ju med 8 ton minst 👌
@banda2200
Жыл бұрын
Tar mellan 9 - 11 ton i min skopa,beroende på material 💪
@jojjekalle635
Жыл бұрын
@@banda2200 orginalskoppan ? Lr e de lit större kanske 😊