The lint is everywhere 😄

Some points to consider. Try wrapping a thin microfiber cloth on a fly swatter and try pushing that into the lint housing to catch lint. You could try used dryer sheets as well they are the same material. It might work easier than a vacuum machine. Despite the cleaning you are doing there will still be lint inside the machine which you cannot access easily. if you can remove that white thing around the opening then you may be able to stick your vacuum in more to pull lint. After 2-3 years you will have to disassemble the machine remove the housing and pull the lint out from the inner areas which will eventually collect lint. Otherwise, your efficiency will drop gradually over time.

@grandpasworld4164

2 жыл бұрын

Ohk! Thanks for your help!

There are condenser sprays for cleaning the coil, you can use them

@grandpasworld4164

2 жыл бұрын

Okay, thanks a ton. Will surely try it!

It calls for lot of maintenance work? Is it the same for all makes of dryers.

@grandpasworld4164

Ай бұрын

I don't know about any other makers, sorry. And this one does not require too much maintenance, just basic cleaning

Ifb dryer Lene se thik hoga kya please batai

@Ankur.J

2 жыл бұрын

You will get lot of electricity bill

@olifern

Жыл бұрын

I'm using ifb vent dryer and the only thing to clean is one filter. The only downside is perhaps high electricity bill but then it might be 20k less than this heat pump. The other thing is it may heat up the room more as all the heat plus the condensed air is thrown out into the room. I'll try and measure the electricity consumption but its definitely higher than the beko heat pump

Pls wear mask while cleaning filters. Not good if you inhale dust +lint particles as while cleaning it usually goes up in air.

@grandpasworld4164

2 жыл бұрын

Okay. Thanks so much for the input. Will surely keep in mind.

how much it cost mam?

@grandpasworld4164

Жыл бұрын

28k when I bought it