VKB STECS Throttle - Review

Ойындар

Taking a look at the Brand New VKB STECS Standard Throttle. A new modular/customizable throttle at a great price. The STECS allows for customization of detents and buttons which we have not seen in this marketspace before.
Learn more: www.vkbcontrollers.com/
Music: • Best Peaceful Hip Hop ...
00:00 - Intro
00:30 - Disclaimer
00:38 - Models Comparison
01:52 - STECS Standard Features
04:13 - Modular Customizations
04:30 - Installing Modular Buttons
05:30 - Re-calibrating for newly installed buttons
06:16 - Installing Grip Pads
06:43 - Detent Shapes and Frame Setup
08:42 - Detent Frame Install
09:25 - Detent Software Setup
12:06 - Detent Setup in DCS World
13:37 - My Thoughts and Opinions (Review Summary)
14:40 - Summary of Detent Conversation with VKB
15:21 - Thoughts on what could be improved
Discord ► / discord
Twitch ► / jabbers_
Twitter ► / mjabbers
#VKB #throttle #review #modular #dcs #hotas #controller

Пікірлер: 159

  • @GeFlixes
    @GeFlixes9 ай бұрын

    It's awesome that every throttle now has customizable detents. That's something I wish I had 10 years ago - even bought aftermarket detents for my Thrustmaster throttle back then!

  • @9GLoco
    @9GLoco9 ай бұрын

    For the idle detent, setting it to < or less than and using the "OFF(hold)IDLE" will allow you to turn the throttle off by pulling it back past the detent. Basically the same as what you showed in the video, but with a bit extra functionality.

  • @KevTCC
    @KevTCC9 ай бұрын

    Only 5 mins in and already the most helpful review of this throttle. Thanks!

  • @BlackjackTheLad
    @BlackjackTheLad9 ай бұрын

    Always appreciate your insights and thoughts on sim hardware, Jabbers. Glad we've got this one - hopefully more around the corner?

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Hope so

  • @bulversteher
    @bulversteher9 ай бұрын

    Thank you for bringing this product to my attention, been waiting for something like this from VKB for years! Put myself on the notification list - perfect companion for my Gladiator NXT.

  • @gappleton8255
    @gappleton82559 ай бұрын

    This is the review I've been looking for! Well done!

  • @PilotPhotog
    @PilotPhotog7 ай бұрын

    Excellent review and demonstration of this throttle. I ordered one as soon as I finished watching your video. Great content and you deserve way more subscribers - count me as one of them now. Cheers!

  • @PCPAyLOAD
    @PCPAyLOAD8 ай бұрын

    Love my VKB gear. Been using them since the first Gladiator Mk1. For mostly plastic devices its top notch quality. Thanks for the throttle review.

  • @xaviersillen3428
    @xaviersillen34289 ай бұрын

    Great video and very nice, constructive review. Thanks in particular for discussing softer detents and multi-stage afterburners detents and providing this feedback to VKB.

  • @manizaeim
    @manizaeim9 ай бұрын

    Extremly impressive throttle, the level of customization is insane! I missed your DCS Videos, the dogfight series, Missios with Tricker, toturials and more ... All the best "ur best Maverick split throttle moment" 🤣

  • @andycozzens4107
    @andycozzens410725 күн бұрын

    Been looking at upgrading from my Logitech X56 setup and I really appreciate your reviews. Very thorough, full of good information, and willing to address any shortcomings the product may have. Really helpful in making informed buying decisions. Keep up the amazing work!

  • @Tuuvas
    @Tuuvas9 ай бұрын

    Nice review, Jabbers! I really hope VKB pushes out those smaller and more subtle detent options!

  • @myuw91
    @myuw919 ай бұрын

    Thank you for reviewing this, definitely going to order one soon!

  • @pip07200
    @pip072009 ай бұрын

    Got mine last month, worth the wait, fantastic value. Setting the detents up was easy : Instead of idle, it was bound to buttons, and used reversing thrust.

  • @VonHoffnung
    @VonHoffnung2 ай бұрын

    Thank you for the review - just ordered mine!

  • @speed-of-heat
    @speed-of-heat9 ай бұрын

    nice to see you back

  • @Jabbers

    @Jabbers

    9 ай бұрын

    I've been here, just lurking in the shadows 🤣

  • @speed-of-heat

    @speed-of-heat

    9 ай бұрын

    @@Jabbers wel that's not at all creepy 🤣🤣

  • @Phipanjo
    @Phipanjo9 ай бұрын

    The swappable design is very nice! Great and detailed video!

  • @thesquire5318
    @thesquire53185 ай бұрын

    Thanks Jabbers! My X56 throttle died after 3 loyal years and this was recommended...so after watching your review, I'm sold!

  • @mvaldman2001
    @mvaldman20019 ай бұрын

    Jabbers! Thanks! One of the best and most detailed reviews on the net! As always, great job!

  • @SnowTiger45
    @SnowTiger459 ай бұрын

    Great Review. VKB makes excellent products and at this price, I believe they will sell a ton of these throttles. I've been using a VKB Gunfighter MK II MCG Pro Grip for years and I LOVE IT. It has more 5-way hats than any other stick I am aware of providing tons of functionality which is required or at least extremely useful in many of DCS modules.

  • @eknib
    @eknib9 ай бұрын

    fantastic review, and appreciate the tutorial on setting up the dents

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Thanks for watching!

  • @SkittZee
    @SkittZee9 ай бұрын

    Great video, review too, well done, yes we want more !

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Thank you!

  • @karlviargretarsson464
    @karlviargretarsson4645 ай бұрын

    Great review. This helped me a lot and I'm buying one soon

  • @eddysouidi9263
    @eddysouidi92639 ай бұрын

    good review!! VKB is now on my List for Christmast 🙂

  • @bmbpdk
    @bmbpdk9 ай бұрын

    Thank you for this video. A very interesting product, especially the modular buttons. It is always a pleasure to see manufactures experimenting with concepts like this, especially in a niche market as our. It either takes b*lls or some very thorough R&D to spent resources on things like this by a company. Having been flightsimming since the late 90´s, ive tried almost every brand out there, so i always recommends brands having stable and longlasting axis and software. So often bad/cheap axis and/or badly written software brakes the hardware. I dont mind spending half a day learning the software, as long as that software is stable and "just works".

  • @JMAv8Tor
    @JMAv8Tor9 ай бұрын

    LOVE THE DETENT SOLUTIONS!!!

  • @notarokescientist3003
    @notarokescientist30036 ай бұрын

    bought it love it and the software gives amazing versatility

  • @RoamingAdhocrat
    @RoamingAdhocrat4 ай бұрын

    bought one an hour or two before watching this and feeling pretty confident I made a good choice!

  • @or10nsharkfin
    @or10nsharkfin8 ай бұрын

    Hot damn. VKB's shooting for the stars with their gear. Having just gotten into DCS World and flying an F15E in it I might have to look into getting this in the near-future.

  • @riku4441
    @riku44418 ай бұрын

    Very good review, thank you Jabbers

  • @Mightymoose02
    @Mightymoose029 ай бұрын

    Throttle looks awesome... Nice features and price. If the mini stick was movable as the other buttons, I would be totally sold. I like the mini stick on the index finger much more...

  • @S3NTRY
    @S3NTRY9 ай бұрын

    Great stuff, thanks Jabbers!

  • @erichresko3523
    @erichresko35239 ай бұрын

    With respect to the mini-stick issues...if you happen to own an MCGU, you can swap out the module switch covers (both hats and mini-sticks) from the MCGU with the mini-stick on the STECS. I've found the castle switch hat cover from the MCGU works well since it has flats at each of the cardinal directions, so regardless of your thumb orientation, you can index your movement relative to the hat switch cover. If you don't have an MCGU you're kind of out of luck, but a lot of folks on VKB's discord have asked for this hat switch cover, so maybe soon they'll either sell it separately, or ship it with the STECS...

  • @jubuttib

    @jubuttib

    9 ай бұрын

    Ooh, they're compatible? Nice. I think though that I'll just 3D print a new castle cap for it.

  • @Easyn_
    @Easyn_7 ай бұрын

    Great video, thank you!

  • @Jabbers
    @Jabbers9 ай бұрын

    Been a while since I posted a video, hoping to get back at it! Hope you guys enjoy, let me know if you have any questions! Some minor corrections: - 5:45 'recalibrate', should be 'reconfigure' - 8:08 about the detents per frame - officially there are 3, but 4 could be added (also, 10 frames instead of the default 5). To do this you just add PimpMySTECS for expanding the detents/frames this line: PimpMySTECS under the [USER] section in the file named zconfig.ini, which is located in the same folder with VKBDevCfg. Discord ► discord.gg/ZnkvumS

  • @dorfkind9825
    @dorfkind98253 ай бұрын

    Just ordered one already got the MCG and SCG as HOSAS Setup

  • @PolTen72
    @PolTen729 ай бұрын

    "perform your best Maverick split throttle moments"... Genius 😀

  • @DreadnautVS
    @DreadnautVS9 ай бұрын

    Well done video boss, thank you.

  • @oldmanfunky4909
    @oldmanfunky49099 ай бұрын

    I'm jealous he got it for free! But this throttle is on my xmas list. I already have the VKB Evo stick and this throttle will be a great addition!

  • @marcquintin7855
    @marcquintin78559 ай бұрын

    Got the mini a week ago and I just love it

  • @streetmachine8211
    @streetmachine82114 ай бұрын

    Good review

  • @mofa1332
    @mofa13329 ай бұрын

    Quality stuff Jabbers

  • @CaseyBartley
    @CaseyBartley9 ай бұрын

    Speed brake module more like WinWing's and the thumb analog to also be modular to the index finger position (or middle finger) would basically make this the best choice for price to performance.

  • @303HOLYONE
    @303HOLYONE9 ай бұрын

    I almost forgot your sweet deep voice sir :) I hope you're good.

  • @Darrylx444
    @Darrylx4449 ай бұрын

    The software can also convert the rotary encoders into axes. Also, I made a single button into an axis (auto trimmer) using it. Very powerful.

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Ya the software is great but prob something for a separate video

  • @4IN14094
    @4IN140949 ай бұрын

    The analog stick problem can be a easy fix with a head model with more tactile features like a 4 way head and a extended lip on both side of the thumb, I hope they add those to the package.

  • @dynameis
    @dynameis9 ай бұрын

    you should able to setup button trigger at idle / cutoff position so no need click button manually , also , you can change the throttle axis range/dz by software so you can make after bunner trigger position without change physical detent position

  • @ImpendingJoker
    @ImpendingJoker9 ай бұрын

    Well if they sell additional detent markers, then it wouldn't take much to file one down to make it into the little haptic feedback you're talking about or if they don't take one of the included detents you are not going to use, and modify one of them. All in all, this is a nice bit of kit for a good price. I might have to look into this to replace my Saitek X56 Rhino.

  • @tver
    @tver9 ай бұрын

    Nice and clear review. 👍 Having (even) more input & detent options (Detent Pack 2?..) would indeed be nice. And not just a specific airbrake ON-OFF-(ON) switch, but als an ON-OFF-ON toggle for the F-16’s Dogfight switch or the F-15’s Gun-SRM-MRM weapon select switch. I’m also curious about the ATEM module. Especially about the jettison dial-alike. No reviewer has reviewed a Mini Plus or Max version yet..

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Ya more toggles would be great

  • @jubuttib

    @jubuttib

    9 ай бұрын

    Afaik the round switch on the atem is a 7-way (simracers familiar with fanatec would say "funky switch"), so cardinals, push, and encoder. One guy has a review of the max out so went through the ATEM too.

  • @mungo7136

    @mungo7136

    2 ай бұрын

    Myself, I'd like at least one encoders on the left to be changed for axis or be given and optional module to do so. Probably - if internal space allows for that - they should consider option to swap mini-axis on the right side with 4-way on the front as built-in interchangeable modules. Same as than button/4-way combo on the right already is.

  • @EZLogikal
    @EZLogikal25 күн бұрын

    For anyone who wants a smaller or less aggressive detent - you can always file them down a little bit.

  • @WhyitJellyDonut
    @WhyitJellyDonut9 ай бұрын

    As some one who uses vr for dcs I wish this came out earlier as I have a lot wasted buttons that I simply cant reliably hit due to not being able to see them while having a headset on so I got a lot of wasted buttons(money) on my virpil.

  • @johnsullivan676
    @johnsullivan6764 ай бұрын

    seems like it would be easy enough to make your own detents or "rumble strips". They don't need to be as fool proof and professional as the supplied ones, just add some tactile feedback as you say.

  • @Hardcover_Pilot
    @Hardcover_Pilot9 ай бұрын

    One thing that could also help with the mini stick is a hat closer to the concave ones that came with the button modules - having a pattern to give you that tactile sensation of "this is X, this is Y." Some guys on the VKB Discord are already working on designing a 3d-printed replacement for the thumbstick hat, and honestly I wouldn't be surprised if VKB didn't offer an option as well in the future.

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Ya I actually had someone reach out and send me the design for a 3d printed replacement like that.

  • @Hardcover_Pilot

    @Hardcover_Pilot

    9 ай бұрын

    @@Jabbers Nice. I'm definitely looking to pick one up once someone throws them on Etsy or something. Haven't made the plunge on a 3d printer of my own yet.

  • @Enigma89
    @Enigma899 ай бұрын

    Take my algorithm food 🙏

  • @UraniumEagle
    @UraniumEagle9 ай бұрын

    I've posted to the VKB discord a 3D printable replacement HAT for the TDC that resolves the issue of losing your sense of orientation when moving the throttle through its axis.

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Oh neat! can you ping me on that? @Jabbers in that discord..

  • @9GLoco

    @9GLoco

    9 ай бұрын

    What is your discord username so that I can find this?

  • @thepathnotfound
    @thepathnotfound4 ай бұрын

    I wondered about the quality of the buttons and switches. Do they have a "quality feel? The tall rotary white buttons looked like they might be wimpy? Is this the flight stick company that has an outlet or store in Fla?

  • @iontesu2911
    @iontesu29118 ай бұрын

    Very nice review. Quick question: can I use the 5 position rotary switch as a Modifier in DCS? Thank you.

  • @Jabbers

    @Jabbers

    8 ай бұрын

    Interesting, I don't really see why not but I've never tried, it does appear as 5 separate inputs

  • @thegamingshatt4758
    @thegamingshatt47589 ай бұрын

    Looks pretty cool but here in Aus it's $520 for the standard and I can't see why I would pay for that over $400 for the winwing Orion 2 or $485 with finger lift

  • @jimmydesouza4375
    @jimmydesouza43759 ай бұрын

    The three way "Up-Down" switch with the white cap, is it a 3 way switch or an axis? I saw another review saying it was an axis and it moved smoothly in their video whereas you say it is a 3 position switch and it has a very clear set of "positions". Is it something you can customize?

  • @Jabbers

    @Jabbers

    9 ай бұрын

    It's a switch, the only axis are the left right throttle, the knob on the right throttle and the thumb stick

  • @jroc6345
    @jroc634510 күн бұрын

    Just wondering if there's any axis on there which could be used as rudder pedals (think of the TWCS) - since I do not plan on getting actual rudder pedals but I'm up for a throttle upgrade. Anyway, nice review. Thank you

  • @Jabbers

    @Jabbers

    10 күн бұрын

    Only thing I can think of is the front paddle buttons, but it would be buttons, not an axis

  • @jroc6345

    @jroc6345

    10 күн бұрын

    @@Jabbers yup, I'll keep on looking. Thanks

  • @jubuttib
    @jubuttib9 ай бұрын

    16:44 Until VKB comes out with something, the fact that they kinda don't pre-define the detents in software in terms of size (you set the deadzones during the wizard, and can adjust them later manually anyway) means that 3D printing different detent profiles should be a fairly simple thing. I might have to give that one a go at some point. =)

  • @Jabbers

    @Jabbers

    9 ай бұрын

    I found out after making this video that the software engineer is always making changes and there are already some hidden features like adding a 4th detent and allowing for 10 frames instead of the default 5. You can changed the size of the detent manually so it is already possible to 3d print and then choose a stock detent in the software but adjust the size after.part of the wizard setup where you mark the front and back of the detent is actually letting the software calculate that size for you.

  • @jubuttib

    @jubuttib

    9 ай бұрын

    @@Jabbers Cheers, and yeah they're definitely updating it. When the first detent guide came out I floated the idea of having different buttons trigger when below and above the detent (wasn't possible originally), and lo and behold by the time they were shipping that had been added. =) Btw I think you had the inside parts/nuts for the detents the wrong way around, the big flat area is supposed to be towards the detent. Might eke out a little bit more space, and get them closer together, at least I did with my viggen ground and air idles. =)

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Oh shit i didn't even think about that... You are probably right.. Spacing would still be an issue as the surface area is still the same, and if the backing plates overlap you would get some angular change on the detent on the top side of the frame. I think the real solution would be create a detent that is 1 piece, with 3 positions on it.

  • @jubuttib

    @jubuttib

    9 ай бұрын

    @@Jabbers Yeah but having the nuts closer to the detent surface Vs far away from it can create a millimeter or two, since they're on an arc. I think I got mine a bit closer than you did. But yeah it's not a REAL solution, just something to think about. I wonder if you could alternate them for even more space, so that one flat area is against the detent, next is upside down and above that, then right way around again...

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Ya alternating might help. Definitly something to tinker with!

  • @geologik7500
    @geologik75009 ай бұрын

    My key-press on detent is wildly broken on STECS Mini+ running 2.165. None of the buttons are correct between the Detent page and Test page.

  • @spitfirefrench
    @spitfirefrench9 ай бұрын

    that extreme de-esser and gate tho lmao

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Hah I just had construction done and the room is empty and square as hell....tried everything to get rid of the ridiculous echo...hopefully the next video will be better since I have added sound diffusers to help with the echo.

  • @spitfirefrench

    @spitfirefrench

    9 ай бұрын

    @@Jabbers no worries dude just yankin ya chain

  • @Jabbers

    @Jabbers

    9 ай бұрын

    I'm mostly impressed you picked up on it, great ear tbh.

  • @BCSchmerker
    @BCSchmerker7 ай бұрын

    +jabbers *Thanks for the comparo.* The Virtual Engineering Bureau manufactures in the ST⚞ECSᵀᴹ Throttle Series an engine quadrant that trumps the VIRPILⓇ MongoosT-50CM3Ⓡ in certain models for Eagle Dynamics DCS:World. Personally, I'd buy the Mini-Plus for the port flat and the STEM Panel for the starboard flat, as VirPil trumps the Virtual Engineering Bureau in hardiness for Control Panels #2 (port angle) and #1 (starboard angle). Has the ST⚞ECS an "inverse hat" for the "OTS" ministick? As a fallback for unavailability of the Throttletek GF-14 Engine and Wing Quadrant, I'd like a 4-way with the default OTS cone in the "OP EXEC" position to control the Wing Sweep; the "RADIO" Stadium and "BRK" Jog heads are appropriate for the notional Heatblur F/A-14E/F. Also the mini-Castle head (low parapet up) and Pyramid head for the 5-ways in, respectively, "MB1" and "MB2." Haven't decided which rotary encoder to assign to Flaps.

  • @dealwolfstriked272
    @dealwolfstriked2729 ай бұрын

    16:00 I said a decade ago that the perfect setup for a desktop throttle is this. Make it so that the throttle uses the sliding rail style so it steers away from the issue you bring up here. I posted this to Virpil and VKB forums "a lot" but no take or responses at all. With slider instead of pivot you do not get a change in hand position and you do not get the mind fuck you get when the hand changes position. I also think that as low as you can make it benefits a desktop setup. Also, same for joystick I feel a system that utilizes as slider rail system would greatly benefit gamers as most play at their desks. Keep the joystick as low as possible and with the pitch on a rail slider system with role as pivot and you just made the ultimate HOTAS!! What do I know, I am just some idiot on a PC sitting in mom's basement?! Well decades ago I fought for the brake pedal that barely moves idea. No one could even understand what I was talking about and nowadays the market for this brake pedal is amazing. Such a simple concept....the human foot doesn't translate movement to the brain but the human foot translates the most miniscule variance in pressure. I got called an idiot for a year and gave up and today we have this. simucube.com/simucube-activepedal/?v=fa868488740a

  • @iontesu2911
    @iontesu29117 ай бұрын

    Any particular reason why you used button 16 (left paddle)? You could use a logic button like 65 (and automatically 66) for the same function without using any real throttle button. And yes, at least in DCS buttons 65 and 66 appear in the Combo selection.

  • @Jabbers

    @Jabbers

    7 ай бұрын

    Ya I didn't realize, talked to VKB after and they showed me

  • @eatthisvr6
    @eatthisvr68 ай бұрын

    the detent led is flashing red, any idea why?

  • @Vireca
    @Vireca9 ай бұрын

    Hi, the detents come in doubles? 2 of the same type. When i think about detents for idle and afterburn i want both feel the same

  • @Jabbers

    @Jabbers

    9 ай бұрын

    An idle/off detent should not feel the same, it's extremely difficult to get over idle/off and would be annoying for an afterburner. That said there are doubles of the detents

  • @theforgedone
    @theforgedone9 ай бұрын

    This throttle looks awesome! Except for the number of encoders. I'd much rather have buttons or toggle switches.

  • @eatthisvr6
    @eatthisvr68 ай бұрын

    10:40 how do you set thatr?

  • @milk4chillout
    @milk4chillout8 ай бұрын

    Thanks for the review. Unfortunately they have massively increased the prices. The standard now costs 355 instead of 279. I find that extremely cheeky

  • @Jabbers

    @Jabbers

    8 ай бұрын

    I just checked, it's 279USD on their North American site still

  • @milk4chillout

    @milk4chillout

    8 ай бұрын

    thanks for checking, than the european market is the cash cow :(@@Jabbers

  • @lucamoccia8995
    @lucamoccia89959 ай бұрын

    hi, when possibility shippent in europe?

  • @shadynasty69
    @shadynasty697 ай бұрын

    it looks as if some buttons aren't distributed well like if you press the A1 or B1 not exactly in the middle it wont register the press is that ever an issue?

  • @Jabbers

    @Jabbers

    7 ай бұрын

    Have not had that problen

  • @tsangarisjohn
    @tsangarisjohn9 ай бұрын

    Awesome price for what you get.

  • @eatthisvr6
    @eatthisvr69 ай бұрын

    how do i get hold of 1 in the uk?

  • @Topper_Harley68
    @Topper_Harley689 ай бұрын

    Must be good for VR.

  • @xp_pk
    @xp_pk9 ай бұрын

    Overall good video, but you missed a few key features of the software that make it much more useful/customizable. For example, you should use the curve setting (crv%) for your AB detents. This allows your detent to stop at an exact value (like 75% for the F-16) even if the physical detent isn't exactly located at 75%. Although, I do acknowledge that the current lack of documentation should be considered in the review since not informing your customers of important features is effectively the same as not including those features in the first place.

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Wasn't missed, just looking for the happy oath without getting too in-depth with the software. The software could be a whole other 20 min video.

  • @jameskane3943
    @jameskane39436 ай бұрын

    Think I might like WinWing Orion 2.

  • @simracer1256
    @simracer125611 күн бұрын

    How many 5 way hats can this throttle have?

  • @eatthisvr6
    @eatthisvr69 ай бұрын

    can i swap the front 4 way for the analogue stick so its the same as the warthog?

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Nope

  • @donrumsey7422
    @donrumsey74229 ай бұрын

    I just got my throttle. How difficult was it to config and align with DCS?

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Pretty easy, I show that in the video

  • @KyleFilms
    @KyleFilms7 ай бұрын

    Hi there, for some reason when I throttle up, the throttle in game doesn't throttle up... I can only be able to do the Idle on and off. Please help!

  • @Jabbers

    @Jabbers

    7 ай бұрын

    I am not a support channel for VKB please contact them directly.

  • @KyleFilms

    @KyleFilms

    7 ай бұрын

    @@Jabbers It is not the hardware. I'm new to DCS and I try to bind the throttle but I can only did what you did which is the idle but I can't thrust or throttle up/down so that is my problem right now. Anyway, thanks for your response

  • @Aurocia
    @Aurocia9 ай бұрын

    Can the throttle hold its weight without moving, under reasonable friction setting?

  • @Jabbers

    @Jabbers

    9 ай бұрын

    The friction is really strong

  • @PeteV80
    @PeteV809 ай бұрын

    Is there no manual? Very confusing to update firmware and settings

  • @Jabbers

    @Jabbers

    9 ай бұрын

    There are videos on VKBs KZread page, also links on their support page

  • @DanielDrake
    @DanielDrake9 ай бұрын

    Excellent review, what are your thoughts on the set screws used in plastic?

  • @Jabbers

    @Jabbers

    9 ай бұрын

    If you aren't constantly swapping them out over and over it's fine. But you do need to be careful.

  • @stijnvandamme76
    @stijnvandamme769 ай бұрын

    Too bad they missed out the obvious feat of the Warthog, the zoom control to the right of the throttle.. That one is soooooo handy to have.. And I love the VKB rudder, its the best. But the throttle just looks cheap, like the buttons seems o be 3D printed or something.. Not sure this throttle stands up against the Warthog..

  • @bruhinatorwastaken
    @bruhinatorwastaken9 ай бұрын

    Can left handed people use this effectively? Seeing how most of the buttons are all on the right it seems like it wouldnt be ideal great, but im hoping someone can prove me wrong

  • @Jabbers

    @Jabbers

    9 ай бұрын

    That'd be tough.

  • @D3adCy11nd3r
    @D3adCy11nd3r9 ай бұрын

    You remember you have a KZread?

  • @Jabbers

    @Jabbers

    9 ай бұрын

    Ya totally forgot

  • @Wh1terider
    @Wh1terider9 ай бұрын

    Just some feedback. Great Setup (and review) Jabs. What turned me off from VKB and over to Virpil was the Materials of Construction of some of their higher ended products, in particular the metal assemblies. Secretly I've been waiting for the proper match to the VKB metal gunfire ultimate series. Also their buttons just feel better. I would like to see VKB incorporate modularity for swapping out buttons, axis points and various switches. Giving the user a more forgiving and cost effective solution. Once they do this, I'll give VKB another look. Thanks!

  • @Chasedtuna9
    @Chasedtuna99 ай бұрын

    Jabbers doing a hardware review sponsored by a flight sim company commonly associated with DCS? WHAT YEAR IS IT!? This might actually be something i grab to replace my X-56... I love that thing to death, but the potential for this could easily outshine it.

  • @Nightdare
    @Nightdare8 ай бұрын

    Somebody with a few pieces of steel, a file, a drill and a wire tap set could start a small business making custom detents

  • @specter929
    @specter9292 ай бұрын

    wow that looks really cheap, the grey plastic also the lack of buttons and hats is a concern - I prefer Virpil myself

  • @markegipto1462

    @markegipto1462

    Ай бұрын

    For the price, it's quite reasonable. The only thing preventing most people from buying Virpl products is the price and the fact that both base and sticks are separate purchases

  • @-thegiggles-
    @-thegiggles-9 ай бұрын

    A new video? I thought you were retired and living in an old folks home.

  • @Jabbers

    @Jabbers

    9 ай бұрын

    They kicked me out for rubbing my junk all over the windows... that place doesn't know what fun is. Anyway now I need to pay rent.

  • @PilotGigi
    @PilotGigi6 ай бұрын

    The only problem is that it’s always oos

  • @vincentvalerio915
    @vincentvalerio9159 ай бұрын

    I cannot get the damn thing to map to throttle.

  • @SonesBen
    @SonesBen9 ай бұрын

    I haven't used this throttle, but I had the same observation regarding that mini-stick just from watching videos about it. Putting 4-way or analog hats on the side of a rotating throttle handle is already kind of fraught, because the "up" direction changes as you push the throttle forward. You can account for it somewhat by using asymmetric caps on those controls; for example, my Virpil throttle has three hats on the side of the right throttle handle. One of them has a boat-style cap, and it's super easy to feel which way is "up" on that hat no matter how the throttle handle is rotated. But another of the hats has a pyramid-shaped cap, and I hate that hat. Every time I go to use it, I'm like "Which was is up on this hat again?" The cap on that VKB mini-stick is even worse, as it's a symmetrical cone that doesn't even allow you to parse where the X and Y axis are by feel. Hats on the front of a throttle handle don't have this issue, because you always pull back for up and push forward for down.

  • @blackhawk7084
    @blackhawk70849 ай бұрын

    I think VKB STEC has some very nice features but all the videos make it look like cheap plastic construction, especially at the buttons and switches. I may be wrong. I havent seen one IRL. I think this could easily be a great replacement for the Warthog if the construction is good!

  • @fystikogiannopoulos
    @fystikogiannopoulos9 ай бұрын

    As with any other VKB product, unavailable for EU customers.

  • @nick11jl

    @nick11jl

    7 ай бұрын

    U know there is a eu cob store right?

  • @nick11jl

    @nick11jl

    7 ай бұрын

    Bro I can’t with this autocorrect bro I meant to say cob in my last reply but it said covered, anyway I keep on replying because KZread on mobile won’t let me edit because it’s goofy like that.

  • @fystikogiannopoulos

    @fystikogiannopoulos

    7 ай бұрын

    @@nick11jl Yeah and it's a 99% chance that when you browse the EU shop, almost everything is gonna be out of stock. Like what I mentioned in my first comment.

  • @jussi8111
    @jussi81119 ай бұрын

    not too bad but imo looks a little flimsy

  • @Jabbers

    @Jabbers

    9 ай бұрын

    It's not at all

  • @IndividualWon
    @IndividualWon7 ай бұрын

    All you have to do is dremel down the detents. Simple.

Келесі