Vivvid Light Smoke tint for my Mercedes tail lights. Installs just like vinyl wrap!
Автокөліктер мен көлік құралдары
In this video, I show how I tinted my Mercedes-Benz C-Class W204 C204 C250 C300 C350 C63 Taillights using a glossy light smoke Air-Fit tint film from Vivvid Vinyl designed specifically for headlights and taillights.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Where to buy gloss light smoke tint:
AMAZON: amzn.to/3FbAfpe
EBAY: ebay.us/w0bwre
Vinyl Kit (Squeegee and Knife):
AMAZON: amzn.to/3uyyWM6
EBAY: ebay.us/dnpjg2
Heat Gun:
AMAZON: amzn.to/3l3sLN2
EBAY: ebay.us/AzPIhR
Music Credit
KZread - “You Like it”
KZread - “Palmtrees”
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This help support the channel and allows us to continue to make videos like this. Thank you for the support!
DISCLAIMER: This video is not endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of FlexxAlexander, I cannot guarantee against improper use or unauthorized modifications of this information. FlexxAlexander assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FlexxAlexander recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FlexxAlexander, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FlexxAlexander.
Пікірлер: 43
FOLLOW ME!!! Website: www.FlexxAlexander.com Facebook: facebook.com/FlexxAlexander1 Instagram: instagram.com/Flexx_Alexander
Flex Your videos inspire me , every mod is so cool bro 💯
Wow. Looks really good. I left the red lens on my 14 C250 sedan alone and only did the clear turn signal. Came out quite nicely. I’m very happy with the results. Each one took me less than 10min.
Another great video Flexx, thanks.
I think that will work nicely on my tail lights, awesome video thank you!
Looks good 👌🏼
It’s really hard, you just make it look easy
@theusbondezan
2 жыл бұрын
Yep
I just installed led side markers. I guess this is the next move to make it more stealthy! Plus I always wanted to do some sort of wrap/tint job just so I can say I've done it before haha
Perfect on 2018 m2🎉
Do you have a technique to trim around the reverse lights?
Hey Flexx, have you considered painting your tailpipe tips in lieu of the soot that builds up? I've thought about Rustoleum high heat. Thoughts?
Hey @Flexx! Another good content here. Could you please tell me how easy to remove is it? And what's about strength of this foil?
Struggled doing my tail lights today i gave up smh. Acura tlx it was tough with the angles
This is the exact tint I’m looking to buy. Same brand, same shade. How did it hold up?
did you have lettering (smal ones) or nubs on your tail lights, and how do you deal with that ? thanks
What percentage is that tint?
Flexx, another great one. But we need some lighting tests to show what the light output is for the reverse LED and brakes etc
Does anyone know if it’s legal to tint my taillights and reflectors in california?
Flex how ur paint so shinny ?
Hi... Flex do you have any medium one can write or contact you privately..?
There is holes in the side of the lights I see you covered the holes as well on the light is that ok? and do you know what are the holes is for?
@theawakening9605
3 жыл бұрын
the holes are for air flow from under the car. they should not b covered up.
My tail lights have tiny raised lettering in one spot from the factory and it looks like I have bubbles there but I don't. Any suggestions?
@top5reviews798
9 ай бұрын
Either re-wrap and remove the sticker or let it be mate
what about the vents on the side of the tail lights? was wanting to do this on mine but i want the reverse portion cut out lol
@TheFlexxGarage
2 жыл бұрын
You can Go cut them out then. I didn’t and my lights looked and functioned fine. The tint is not that dark but enough for a better look.
You didnt cut the little holes of the tail light?
@qizenco
4 жыл бұрын
Dont do it. I learned the hard way.
@AmgKevo
2 жыл бұрын
@@qizenco the vents on the tail lights?
Can a hair dryer work too?
@TheFlexxGarage
4 жыл бұрын
You know that is a hair dryer that i used in the video.
@TakeThis_L
2 жыл бұрын
I would lol not gonna buy a heat gun that’ll get used once and never again.
Ur heat gun is is cute though! No homo
Hey kind of a random question does this car have air suspension?
How can i get a roll shipped to Germany? Somebody please help me out!!
Can I just use my moms hair dryer?
@TheFlexxGarage
2 жыл бұрын
No, it has to be your wife or sisters blow dryer. 🤣
@sandracxo
2 жыл бұрын
@@TheFlexxGarage 😂💀
What % is this tint? Can someone please let me know? Thanks
@TheFlexxGarage
Жыл бұрын
There’s wasn’t any details. The tint I used was “light smoke”. I didn’t use “smoke”. Those are the only 2 options that’s why I left links in the video description.
@rosseffortless6578
Ай бұрын
also maybe switch your bulbs to led , so you won't lose to much brightness
Hello bro. Nice work. Can you give me your Instagram to ask you about something?