Vintage Thursday. Massey Ferguson halfshaft oil seal change.
Follow me on Instagram / cowfarmerdan
Жүктеу.....
Пікірлер: 53
@5ryane Жыл бұрын
You just have to love CowfarmerDans videos because he is very precise with his commentary.
@graemebowyer4901 Жыл бұрын
Another excellent piece of work. Your commentary is what makes it.
@casto- Жыл бұрын
Just Clarence to get it🙄😁👍 I think you two need to do a collaboration vid!
@JonDingle Жыл бұрын
That grease injector adapter is a thing of genius young man. Top tips, to advice and a top bit of kit invented with and for a purpose. Well done squire!
@johncarroll8891 Жыл бұрын
One of your best videos Dan keep them coming I like the repair vids you do
@dougpeterson5257 Жыл бұрын
Very good video, encouraging us to do our own repairs. Thanks so much
@barrymcdonald7089 Жыл бұрын
Really good video. The two tools manufactured on the lathe are brilliant.
@roberthiggins6401 Жыл бұрын
Dan. You're so good at filming and explaining the technical then in layman's terms.
@paulthompson8467 Жыл бұрын
Class video Dan we got new seals and brakes on our 35 a few years ago our mechanic who has worked on MFs all his life made it look so simple that a brilliant tool for putting in the grease👍
@texasdillo9 ай бұрын
Just started doing a seal replacement on my Massey Ferguson. Even though I only understood half of the conversation, I learned enough to help me finish doing the job. Well done and thanks.
@paulf2529 Жыл бұрын
A really useful and detailed video thanks Dan.
@nickhill3362 Жыл бұрын
If had that problem I would definitely tackle it after watching this 👍Dan
@rogerquenault7207 Жыл бұрын
Great video as always Dan, the tool you made for greasing the bearing was genius, you should patent that and sell them.
@multipower617 Жыл бұрын
Another great video, very interesting and informative and that is an excellent gadget to inject the grease
@bigdawg33647 ай бұрын
Using your video as a guide for our 135 1972 Made in England. Incredible machinery and Thank you sir for your videos!! Your garage looks more comfortable than ours in Canada Ha...
@stevebrown2996 Жыл бұрын
First class job Dan ,very clear and informative. I’ll be heading for my lathe very soon !
@bobpaterson1845 Жыл бұрын
Another great interesting an informative video Dan👌
@richardknott7280 Жыл бұрын
Great job Dan, I need to do the half shaft seals on my Grey/ Gold FE35 as oil is leaking out and has got into the brakes, great info regarding this job and the greasing tool was brilliant Thank you
@masseyman6290 Жыл бұрын
Brilliant, informative video Dan 👍
@ianwallett7438 Жыл бұрын
Good video. I’ve got one of them dial gauges but I haven’t got a tractor. Damn!
@johnstewart6725 Жыл бұрын
Love watching your videos some very interesting learning tips thank you for sharing your experience with us
@michaelconroy7445 Жыл бұрын
Well done dan great very interesting and helpful, Keep up the good work bud.
@roba4297 Жыл бұрын
Re greasing bearings, an alternative is to use the gadget originally intended for icing birthday and Christmas cakes using a plain narrow nozzle. I always found it quite successful. Not sure about the modern plastic ones, as I purloined my mother's 1950's metal gadget that withstood the pressure. (She did find out eventually, together with her old deep saucepan I used to heat pistons in, prior to fitting gudgeon pins).
@kevinryan3475 Жыл бұрын
Very interesting video and good technology
@paulweston2326 Жыл бұрын
We always used to set end float so that half shafts just touch, if you turn one and the other one turns in the same direction then they are too tight, you then add shims so that when one turns the other one goes in reverse
@IanFletcher1970 Жыл бұрын
Excellent and informative video Dan
@morrietk Жыл бұрын
Another awesome video! Cheers!
@bilko5109 Жыл бұрын
Enjoyed that vid dan 1st class job
@gordonbell1152 Жыл бұрын
I see brackets on the mudguards for a Clyde tilt cab
@sianwarwick633 Жыл бұрын
You have to get in touch with someone who talks about tractor or mechanical repair , because your info is too 👌 to miss. I now know how to fix that thing
@paulblatchford4234 Жыл бұрын
👍
@scottjones6710 Жыл бұрын
In the process of doing my seal . On inspection there is a grease nipple so the wheel bearing can be greased at any time?
@Swimmer173 Жыл бұрын
What type of grease is used. Do you use any special type of grease on the bearings. Thanks.
@5ryane Жыл бұрын
You can purchase that grease needle here in the USA I bought one over 45 years ago it's pointed so you can place it in the ball of a zerk fitting all so.Gill
@sianwarwick633 Жыл бұрын
I have mentioned your Vintage Thursdays vids on Edd China's latest vid in the comments , as he has not released many vids recently. Hope you get some more views or follows from there
@CowfarmerDan
Жыл бұрын
Thank you Sian.
@deniselister8804 Жыл бұрын
You can’t set preload on bearings with gasket take gasket out put shims back in
@CowfarmerDan
Жыл бұрын
I see what you mean, but workshop manual shows gasket and the chap I learnt from used them too.
@martinclayton2746 Жыл бұрын
If use oil can nose screw that end on the grease gun will that work😀
@greggroome2791 Жыл бұрын
❤️👍😁🇨🇮
@charleshart6992 Жыл бұрын
Excellent video Dan - great job!!
@crimsonsunshine264 Жыл бұрын
Did you do an apprenticeship in ag engineering dan🤔
@CowfarmerDan
Жыл бұрын
No, just a self taught back yard bodger.
@farmer7229 Жыл бұрын
do u know of a source for replacement axle studs or is it a trip to the breakers
@CowfarmerDan
Жыл бұрын
I'm not sure if they're available or not.
@roba4297
Жыл бұрын
Try Patrick Edwards tractor parts or Vintage Tractor parts
@farmer7229
Жыл бұрын
I see acron services vintage tractor parts has them on their website
@robertallen3441
Жыл бұрын
Sure any bolt / nut supplier could source them for you
@deniselister8804 Жыл бұрын
You can’t set preload with gasket take out put shims back in
@jwmfarms Жыл бұрын
You still need to change the outer seal. Even if the inner seal is bad, the oil can’t get by the outer seal if it’s doing it’s job!
@CowfarmerDan
Жыл бұрын
Very true. But just doing the inner is well within the capability of the average DIY mechanic without special tools.
@jwmfarms
Жыл бұрын
@@CowfarmerDan By the way, there are three different thicknesses of those shims; .004”, .016” and .021”.
@kenaston4220
Жыл бұрын
@@CowfarmerDan I guess the outer seal was leaking oil that had passed through the bearing. Changing just the inner seal does hold the oil back though and is less of a job than trying to replace the outer one too. This video gives me confidence that I could replace the inner seal, refitting that shrink ring wouldn't be possible for me!
Пікірлер: 53
You just have to love CowfarmerDans videos because he is very precise with his commentary.
Another excellent piece of work. Your commentary is what makes it.
Just Clarence to get it🙄😁👍 I think you two need to do a collaboration vid!
That grease injector adapter is a thing of genius young man. Top tips, to advice and a top bit of kit invented with and for a purpose. Well done squire!
One of your best videos Dan keep them coming I like the repair vids you do
Very good video, encouraging us to do our own repairs. Thanks so much
Really good video. The two tools manufactured on the lathe are brilliant.
Dan. You're so good at filming and explaining the technical then in layman's terms.
Class video Dan we got new seals and brakes on our 35 a few years ago our mechanic who has worked on MFs all his life made it look so simple that a brilliant tool for putting in the grease👍
Just started doing a seal replacement on my Massey Ferguson. Even though I only understood half of the conversation, I learned enough to help me finish doing the job. Well done and thanks.
A really useful and detailed video thanks Dan.
If had that problem I would definitely tackle it after watching this 👍Dan
Great video as always Dan, the tool you made for greasing the bearing was genius, you should patent that and sell them.
Another great video, very interesting and informative and that is an excellent gadget to inject the grease
Using your video as a guide for our 135 1972 Made in England. Incredible machinery and Thank you sir for your videos!! Your garage looks more comfortable than ours in Canada Ha...
First class job Dan ,very clear and informative. I’ll be heading for my lathe very soon !
Another great interesting an informative video Dan👌
Great job Dan, I need to do the half shaft seals on my Grey/ Gold FE35 as oil is leaking out and has got into the brakes, great info regarding this job and the greasing tool was brilliant Thank you
Brilliant, informative video Dan 👍
Good video. I’ve got one of them dial gauges but I haven’t got a tractor. Damn!
Love watching your videos some very interesting learning tips thank you for sharing your experience with us
Well done dan great very interesting and helpful, Keep up the good work bud.
Re greasing bearings, an alternative is to use the gadget originally intended for icing birthday and Christmas cakes using a plain narrow nozzle. I always found it quite successful. Not sure about the modern plastic ones, as I purloined my mother's 1950's metal gadget that withstood the pressure. (She did find out eventually, together with her old deep saucepan I used to heat pistons in, prior to fitting gudgeon pins).
Very interesting video and good technology
We always used to set end float so that half shafts just touch, if you turn one and the other one turns in the same direction then they are too tight, you then add shims so that when one turns the other one goes in reverse
Excellent and informative video Dan
Another awesome video! Cheers!
Enjoyed that vid dan 1st class job
I see brackets on the mudguards for a Clyde tilt cab
You have to get in touch with someone who talks about tractor or mechanical repair , because your info is too 👌 to miss. I now know how to fix that thing
👍
In the process of doing my seal . On inspection there is a grease nipple so the wheel bearing can be greased at any time?
What type of grease is used. Do you use any special type of grease on the bearings. Thanks.
You can purchase that grease needle here in the USA I bought one over 45 years ago it's pointed so you can place it in the ball of a zerk fitting all so.Gill
I have mentioned your Vintage Thursdays vids on Edd China's latest vid in the comments , as he has not released many vids recently. Hope you get some more views or follows from there
@CowfarmerDan
Жыл бұрын
Thank you Sian.
You can’t set preload on bearings with gasket take gasket out put shims back in
@CowfarmerDan
Жыл бұрын
I see what you mean, but workshop manual shows gasket and the chap I learnt from used them too.
If use oil can nose screw that end on the grease gun will that work😀
❤️👍😁🇨🇮
Excellent video Dan - great job!!
Did you do an apprenticeship in ag engineering dan🤔
@CowfarmerDan
Жыл бұрын
No, just a self taught back yard bodger.
do u know of a source for replacement axle studs or is it a trip to the breakers
@CowfarmerDan
Жыл бұрын
I'm not sure if they're available or not.
@roba4297
Жыл бұрын
Try Patrick Edwards tractor parts or Vintage Tractor parts
@farmer7229
Жыл бұрын
I see acron services vintage tractor parts has them on their website
@robertallen3441
Жыл бұрын
Sure any bolt / nut supplier could source them for you
You can’t set preload with gasket take out put shims back in
You still need to change the outer seal. Even if the inner seal is bad, the oil can’t get by the outer seal if it’s doing it’s job!
@CowfarmerDan
Жыл бұрын
Very true. But just doing the inner is well within the capability of the average DIY mechanic without special tools.
@jwmfarms
Жыл бұрын
@@CowfarmerDan By the way, there are three different thicknesses of those shims; .004”, .016” and .021”.
@kenaston4220
Жыл бұрын
@@CowfarmerDan I guess the outer seal was leaking oil that had passed through the bearing. Changing just the inner seal does hold the oil back though and is less of a job than trying to replace the outer one too. This video gives me confidence that I could replace the inner seal, refitting that shrink ring wouldn't be possible for me!