Vintage Belt Sander Restoration
Ғылым және технология
I bought a vintage belt sander from a used tool store. Through my research, I discovered it was manufactured by Makita, model 9400, in Japan. When I found it, the shaft was seized and it was quite rusty. In this video, I will restore its functionality. I hope everyone enjoys the video
* Belt Sander Information *
- Brand: Makita
- Model: 9400
- VOLTS: 100-110V
- Power : 880W
- Curent : 8A
- Frequency: 50/60 Hz
- Belt Size: 100 x 610 mm (4 x 24")
- Belt Speed: 400 m/min
- Net Weight : 8kg
I'm very happy to receive your feedback, advice, suggestions to improve myself.
-------------------------
Like and subscribe to support the channel ^^
Thank you so much for watching !!
Have a nice day ^^
#restoration #restorationvideos #restore #repairwork #beltsander
-------------------------
Content
0:34- Intro
10:36- Disassembly
21:36- Restore and clean
32:43 - Complete and check operation
Пікірлер: 132
For €30 I bought a very old belt sander Makita 9924DB...it is in excellent condition and works...just a little dirty, rust etc...I already have all the bearings etc...I will also restore it😃 Good video...keep it up.👍
@hbrestoration
10 күн бұрын
Hope you can bring it back ^^
Another great restoration! I love it that you just get on and fix things, no fuss, no drama, just broken to working. I look forward to the next one!
@hbrestoration
10 күн бұрын
Thank you very much ❤️❤️❤️ have a nice day
Consider the Zen of sanding the sander....
@hbrestoration
9 күн бұрын
zen??? I do not understand
@jesseratcliff3508
6 күн бұрын
In this context zen means “pondering the meaning of existence, raising one’s consciousness of reality.”
Con el lujo de detalle, esmero y dedicación japonesa... Resultado esperado!. Formidable trabajo 😊. Saludos desde Irapuato GTO, México.
@hbrestoration
6 күн бұрын
Many thank my friend ^^
Who else groaned when that piece broke off from the stuck bolt?
@hbrestoration
5 күн бұрын
🥲
Nice refurbishing job. I felt bad for you when you broke off the corner when removing the screw that was holding on the plate. But you welded it back drilled and taped it and made it work. All in all, it came out nice. A great color for the sander body would have been a hammer stone silver grey. But it still looks good how you painted it. Thumbs Up!
@hbrestoration
10 күн бұрын
Many thank ^^ have a nice day
@jasoncdebussy
7 күн бұрын
"Tapped" not "taped" 👍😊
@hbrestoration
7 күн бұрын
@@jasoncdebussy
@jasoncdebussy
7 күн бұрын
@@hbrestorationI have no idea what those emojis are meant to convey 🤔
@hbrestoration
7 күн бұрын
@@jasoncdebussy nothing, just kidding. I want to write something but don't know what to write😅
Excellent restoration, but not everything needs to be painted....like the 2 rollers and flat plates.
@hbrestoration
10 күн бұрын
Yepp, I was also wondering if I should paint it
A melhor lixadeira do mundo, eu tinha uma dessas, só na fera da marreta da pra, achar uma dessas ainda.
@hbrestoration
8 күн бұрын
but it's too heavy 🥲
Very old to very new. But you know what they say about used tools? All they need to do is the job. The job doesn't need pretty tools.
@hbrestoration
6 күн бұрын
I understand what you mean. It's like buying a new tool, it's better
@robertblahnik7685
6 күн бұрын
@@hbrestoration No, I didn't say that. I'm meant that it doesn't matter if a tool is new or old so as long as they do the job. Having said that, its very good that you restored that tool because during a restoration you can find issues that need attention like a worn bearing, or belt drive that slips, or a crack in the housing like the one you found on the sled. Here's another example: my dad had a very old Craftsmen Drill that quit working so my dad got another drill that had a better chuck. So he didn't throw out the old drill. So I restored it and polished it's aluminum casing, and doubled the length of the cord. I replaced the chuck with a newer Jacobs chuck. Next, I sharpened all 100 of his drill bits. So he gave me his other drill, which I used for 10 years until the first cadmium battery drill came out and I got that.
@hbrestoration
6 күн бұрын
@@robertblahnik7685 I think so too, it's great that you have such a great tool, what's more meaningful is that it's associated with a memory with your father.
good job and. using torch whit wd40 for the tight bolts.
@hbrestoration
10 күн бұрын
I used wd 40, but no luck
Wait!, the sander was jittering so much because he wired it wrong, it was running backwards...watch which way the belt turns lol
@hbrestoration
8 күн бұрын
😅Yepp you are very observant, I had to reverse the wires
I think I would have polished the body of it but personal preference, looks great.
@hbrestoration
10 күн бұрын
Thank you I will try to do better next time
@resurrectiongarage1506
10 күн бұрын
@@hbrestoration nothing wrong with it, it turned out great, i just like polished aluminum
@danceswithaardvarks3284
7 күн бұрын
I was thinking it would look good polished, but then remembered restoring an ELU MHB 90, After fully polishing the case (took ages0 the motor let out the blue smoke, so now it's on a shelf and may get a rewind some day.
Push in a bearing by the outer race not the inner race.
@hbrestoration
7 күн бұрын
Pressing on the shaft will apply force to the inner ring
Good work on that one, it's always gratifying to see old power tools brought back.
@hbrestoration
10 күн бұрын
many thank ❤️❤️❤️ have a nice day
@prod_change_up
8 күн бұрын
And then put to use!
استمتعتُ بعملك الجميل.. من لحظة بداية الفيديو وأنا أتساءل: ما هذه الآلة، وما عملها؟ وجاء الجواب واضحًا في الثواني الأخيرة.. شكرًا لك على هذه المتعة..
@hbrestoration
8 күн бұрын
many thank, have a nice day ^^
Restaurada lixadeira de cinta 😉
@hbrestoration
10 күн бұрын
Thank you very much ^^ Have a nice day
Invest in some soft jaws for your vise!
@hbrestoration
3 күн бұрын
Many thank 🥰 I will pay attention to it
Very good
@hbrestoration
4 күн бұрын
❤️❤️❤️ many thank
Very nice👍🌹👏👏👏👏
@hbrestoration
4 күн бұрын
🥰🥰🥰 thank you
Maravilloso video, y excelente trabajo mis felicitaciones
@hbrestoration
3 күн бұрын
Thank you ^^ have a nice day🥰
THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@hbrestoration
9 күн бұрын
Many thank🥰🥰🥰🥰
Great video and authoritative teardown and rebuild. I restored two of these. One is a Makita and the other branded Wolf (made by Makita). I use one for sanding and one for pulling out vehicles stuck in mud. Joking of course, but they are a beast of a sander. Not sure why yours was bouncing around so much, which it shouldn't. Maybe a belt bump issue?
@hbrestoration
7 күн бұрын
because my sandpaper has a burr
Beautiful restoration job you did restoring that belt sander. It looks much better and it works like a charm too. Just like new. Excellent work.
@hbrestoration
10 күн бұрын
Thank you very much ^^ have a nice day
Well done my friend, from, Bayamo, Cuba
@hbrestoration
10 күн бұрын
Thank you Cuban friend❤️
Nice
@hbrestoration
3 күн бұрын
thanks 🥰🥰🥰
I don’t know how 😊they can disassemble and put it back together without an assembly book!
@hbrestoration
8 күн бұрын
Complex machines may have to use it😅
@brentdallyn8459
8 күн бұрын
he can't, he rewired it wrong, the belt was going in reverse! check it close, you can see it rofl
Спасибо класс.
@hbrestoration
8 күн бұрын
❤️❤️❤️ many thank
Very well done my friend!👍
@hbrestoration
9 күн бұрын
❤️❤️ Thank my friend 🥰
マキタ電気ベルトサンダーや!
@hbrestoration
3 күн бұрын
yepp
24:53 One of the screws was still quite loose.
@hbrestoration
4 күн бұрын
You are very observant and have discovered that, when testing the device, I must have plenty of energy
Very nice restoration
@hbrestoration
8 күн бұрын
🥰🥰🥰 many thank
Nice restoration👍🏻😊
@hbrestoration
6 күн бұрын
Many thank ^^
Nice restoration 😊
@hbrestoration
7 күн бұрын
Many thank ^^ have a nice day
Great job 👏👍👌❤️
@hbrestoration
7 күн бұрын
❤️❤️❤️❤️ many thank
Exactement la même conception que nos bidules en plastique actuels 😢
@hbrestoration
9 күн бұрын
It's much heavier, it's tiring to hold 🥹
Doesn't sandblasting hurt your hands?
@hbrestoration
10 күн бұрын
I don't spray it on my hands, it's very dangerous to do that. Warning, don't do the same as me
Didn't realize a tool from 2016 was vintage?
@hbrestoration
2 күн бұрын
😅
How'd you fix the giant crack in the planer housing? It looked like it went through and through and was several centimeters long.
@hbrestoration
2 күн бұрын
I have done it video
Superb
@hbrestoration
10 күн бұрын
❤️❤️❤️
8:57 - хотел починить - доломал...
@hbrestoration
8 күн бұрын
🥲
😍😍😍😍👌👌
@hbrestoration
10 күн бұрын
❤️❤️❤️❤️
ou avez-vous acheté vos bandes de papiers sablés de 27 pouces. car jj'ai vintage de 1950
@hbrestoration
9 күн бұрын
Is there any e-commerce site where you live or you can search on google, there are many, size 610mm
Parece um tanque de guerra da ww2
@hbrestoration
3 күн бұрын
Agreed, I see it too😅
I just read the specs on the sander and the thing that really caught my eye was the weight 8 KG's. WOW Some mauls or sledge hammers wern't that heavy. Do you know the year Sir?? Great job and have a nice one. I am only at minute 9 but you always do a fantastic job. Please have a decent Week.
@hbrestoration
8 күн бұрын
it's quite heavy for me, I tried and couldn't find its year of manufacture
@rosellabill
8 күн бұрын
@@hbrestoration Thank you for that. And nice work. Looks great
@brentdallyn8459
8 күн бұрын
what caught my eye, that the belt was moving in reverse...he wired it wrong, check it
Много смазки,она греется сильно.
@hbrestoration
5 күн бұрын
I will pay attention to it
😢😢😢
@hbrestoration
7 күн бұрын
🥺
После того как этот "мастер" отломил кусок от алюминиевого корпуса я выключил видео. Это ужас.
@hbrestoration
10 күн бұрын
Should I cut it off and act like nothing happened?
🤩☺️😁😀😇🤗👍🤓😎💯😊
@hbrestoration
8 күн бұрын
🥰❤️🥰🥲🥰❤️
I hope you will enjoy the video 🥰
@user-tp7jd4ok1o
4 күн бұрын
Yes absolutely wonderful
👏🥃👍👏🥃👍👏🥃👍👏🥃👍👏🥃👍👏🥃👍
@hbrestoration
10 күн бұрын
❤️❤️❤️🥰🥰🥰
👏👏👏👏👏👏💯💯💯💯👍👌🇧🇷🇧🇷
@hbrestoration
9 күн бұрын
❤️❤️❤️🥰🥰🥰
❤🎉🎉⭐⭐🎀🎀
@hbrestoration
8 күн бұрын
😘😍❤️
Liked everything you di from the recording, to the restoration to the editing, however, it's what you didn't do that will prevent me from subscribing at this time. You didn't provide any information whatsoever on what steps you were taking once you had deconstructed the sander. I want to be able to follow and you didn't provide that. I'll check back at a later date to see if you've added it. Good luck.
Статор и ротор если и были живые после такого Ремонта не выжили! Это не восстановление...
@hbrestoration
3 күн бұрын
😅
second
@hbrestoration
11 күн бұрын
Thank^^
fake
@hbrestoration
7 күн бұрын
🥲
First
@hbrestoration
11 күн бұрын
❤❤❤
Kỹ năng quá kém . Không cẩn thận ở những nơi khó thao tác 👎👎👎
@hbrestoration
6 күн бұрын
Which operation, can you explain to me?
@hbrestoration
6 күн бұрын
Thao tác nào ạ, bạn có thể chỉ rõ cho tôi