Vice Design Hidden Winch Mount Ram Rebel
Автокөліктер мен көлік құралдары
My thoughts on the Vice Design Hidden Winch Mount for the 2019+ Ram 1500.
#notsponsored
Vice Design Install video for Ram Rebel - • 2019-2024 RAM 1500 DT ...
Products Seen in this Video
Vice Design Hidden Winch Mount - www.vicedesign.ca/
Warn Zeon 10s Platinum - amzn.to/2V81Jth
Factor 55 1.5" Hawse Fairlead - amzn.to/3qT0kCI
Factor 55 Ultrahook - amzn.to/3jT4Wax
Trigger 4 Plus Wireless Lighting controller - amzn.to/3jWNSjT
Auxbeam Amber Ditch lights - amzn.to/36mWfgJ
zRoadz hood Ditch light brackets 2019+ Rebel - amzn.to/3wmCrEF
Recovery Gear
Soft Shackle (38,000lbs Breaking Strength) - amzn.to/3dVTJ5f
GearAmerica Off-Road Recovery Kit - amzn.to/3Ay26hb
Tools in this Video
TEKTON 1/2 Inch Drive Click Torque Wrench - amzn.to/3iQGiXs
1/2" x 18" Breaker Bar - amzn.to/35ys1XR
1/2" Drive 21mm Socket - amzn.to/3qg2Jaj
64 piece 1/4", 3/8, and 1/2" socket set - amzn.to/3q9UgW5
Tools can be found in my NEW Amazon Affiliate Storefront
bit.ly/WPDToolStore
▽ WorkPlayDrive Approved product Discount Page
www.workplaydrive.com/product-...
▽ My Video Recording Gear ▽
bit.ly/WPDRecordingGear
▽ Advanced Audio setup ▽
bit.ly/WPDRecordingGear
🔴 WorkPlayDrive APPROVED Products 🔴
Luxe Auto Concepts
I'm a Luxe affiliate your purchases save you money and help my channel
Get your tint kits here bit.ly/2lYCvux
5% Discount code WPD2022
~*~*~*~*~*~ Folow us ~*~*~*~*~*~
www.workplaydrive.com
/ workplaydrive
/ workplaydrive392
/ workplaydrive
~*~*~*~*~*~ Music Info ~*~*~*~*~*~
End Screen
🎵 Beats By Shocka252 🎵 / livinproofsoldier
/ amongstkingz252
Big Horn, HFE, Laramie, Limited, Limited Longhorn, Lone Star, Rebel, TRX, Tradesman
Пікірлер: 38
Ill have to add "swivel chair" to suggested tools that worked like a dream! Appreciate the review - It truly means a ton and goes a long way help the crew of our small design/fab shop.
@WorkPlayDrive
3 жыл бұрын
It’s always the small shops that are driven to provide the best stuff 🧡
Great video. Also ordered my Vice Design hidden winch mount system for same reasons you mentioned; quality product and very responsive! Thanks for posting!
@WorkPlayDrive
3 жыл бұрын
anytime, enjoy 😉
Awesome to see this new truck content on the channel 👍
@WorkPlayDrive
3 жыл бұрын
Thank you!
Great to see your son taking part!! outstanding
@WorkPlayDrive
3 жыл бұрын
Yep he's enjoying truck life.
Good stuff, finding info on our newer model Dodges is hard to find.
Great video!! Definitely prefer the more in depth ,step by step videos though
Great video, thanks for posting.
@WorkPlayDrive
2 жыл бұрын
Thank you
I love the video , I can stop looking at winch and order this . Where did u get the raptor lights from?
What are the directional limits on the winch with that fair lead ?
Looking to buy it already got the winch the only thing is i would like for them to have is a combo for the sensors and the light mount.
I Love it. ❤️
I wish I could make it work for the eco Deisel
This needs be factory option 😍
Great video. Do you know if this mount will interfere with the mounting of the RCI skid plates?
@WorkPlayDrive
3 ай бұрын
Sorry Not sure on how the skid plate mounts. The mount is behind the bumper and relatively high up and doesn’t extend below.
Nice video. I’ve been thinking of adding this to my ‘21 Rebel. I do like your grill lights. Which ones did you use?
@WorkPlayDrive
2 жыл бұрын
I used these tinted amber lights amzn.to/344TuTR They fit without any mounting. The rubber gasket slides into the grill and locks them in place.
@joeywheeler465
2 жыл бұрын
@@WorkPlayDrive Thank you.
OK I commented 6 months ago on your review how has it been holding up since your installation ? Before I consider to order. Thank you. 🇺🇲 🤙🏼
@WorkPlayDrive
Жыл бұрын
So we’re well over a year in use. I daily this through the NJ winters. Between salt from the roads and off-road driving on the beach. It’s held up very well No rust no loose bolts no rattles it’s almost like it’s not even there! I wish I could say I got stuck more and used it a lot but it’s like a safety net once you have it, you’ll never need it.
great video
@WorkPlayDrive
3 жыл бұрын
Thanks man I was just watching your video the other day on the stripper you used in your deck. I’m picking one up next week to do my garage 💪
@maldo72
3 жыл бұрын
@@WorkPlayDrive yes great tool .. practice with it before use it will have an updated video soon
What kind of rock slider is that ?
@WorkPlayDrive
Жыл бұрын
I have the goRhino steps. They are sturdy as hell, but I loose almost 4” of ground clearance with them.
Did your Rebel come equipped with an IBS (Intelligent Battery Sensor)? If so, how did you handle wiring a winch to an IBS-equipped vehicle?
@WorkPlayDrive
2 жыл бұрын
Remove the negative terminal, and the IBS bolts on from the bottom. Remove the IBS and place the negative winch cable on the battery terminal then reinstall the IBS. The winch negative is connected to the battery terminal.
@HAL-zh1kf
2 жыл бұрын
@@WorkPlayDrive The problem with that is it may provide an alternate path from the battery negative terminal to chassis ground through the winch itself. This would effectively disable the IBS entirely because the battery negative terminal no longer needs to go through the IBS to get to chassis ground. Disabling the IBS could cause potentially serious unknown electrical problems and may void the warranty for related issues.
@waynet6643
2 жыл бұрын
@@WorkPlayDrive HAL is correct. For most winches, casing is ground. If the winch ground cable is connected directly to the battery negative terminal, this can provide an alternate ground path, one that bypasses the IBS, via the winch casing to chassis. This can be somewhat mitigated by installing a winch disconnect to remove winch power/ground when the winch is not in use and/or isolating the winch casing from the chassis. In either case, the IBS will be bypassed when the winch is connected with indeterminate effect on IBS function.
Awesome job 👏🏼 .. if I may what was the total cost $. I like to do the same setup as you did for my 2022 Ram Rebel. Thank you. 🇺🇲
@WorkPlayDrive
2 жыл бұрын
It was about $2900 but there are less expensive winch options. I went with a full wireless setup so I don’t need to roll around in the mud to flip the clutch.
@gray_wolverine63
2 жыл бұрын
@@WorkPlayDrive Awesome I really love your setup and it's what I would go for. To much work for me to install I rather have it installed for me. Since I just retired as a Union Sheet Metal Worker in NYC. But if you are not to far and like to make same cash in helping me installing it let me know because you have done it already on yours and you did an awesome job. Thanks again for the info brother. 🇺🇲🤙🏼
@WorkPlayDrive
2 жыл бұрын
Thank you 🙏 as much as I love doing this stuff, unfortunately I’m not insured to work on other people’s vehicles