I have the very same machine. Not yet used. Please explain the priming and the setting of the black knob. Turned right for priming ? Turned down for painting ??? Thanks

@jelreviews

Жыл бұрын

I'm no expert but in my practical experience with this sprayer, turning the black knob downward was mainly for pressure relief, meaning that at the end of a spray you don't leave the hose pressurised, so you turn the black knob down to release that pressure. I found that this unit primes the paint through the line itself when the knob is turned to the left which is its normal spray position.... there is no specific "priming knob". I placed the suction feed into the paint that I thinned out by adding up to 10% water, and it simply primed. Another thing one can do to "prime" the line, is simply place the suction feed into a bucket of water (provided one is using a water based paint), turn on the spray handle and this will easily suck out the water into the line, once water sprays out place the suction into the paint you want to use, and spray into an empty bucket until your paint product comes out and then you're good to go. Hope that helps! Maybe I should do a video on this whole function and how to clean it, as I didn't cover that in my review video.

@TheRockerxx69

Жыл бұрын

@@jelreviews Many thanks, very kind of you, l appreciate. Yes please do make other explanatory videos. I had another airless spray painter, had a bad experience, and sent it back-the miracles of mail ordering!- hope this will perform better, what is the yellow joint you applied? Teflon? Brand please. Yes the former leaked a lot.

@bwwb5125

8 ай бұрын

Thanks was the best I have seen. Yes, please "do a video on this whole function and how to clean it" I would be appreciated @@jelreviews

@borneovet8372

4 ай бұрын

good bit of kit, just doing my roof with mine. Cleaning it I got a bucket of warm soapy water and ran it through the lot, and then I opened the pressure valve and it washed that through too. Last was taking the gun apart and cleaning the nozzle, so far I am on my fourth 20 litre drum of paint with no problems.@@bwwb5125

@danssv8

Ай бұрын

Wow what a time saver money well spent.

Thank you for sharing. I had no idea about this Vevor Airless sprayer. I am convinced.

Thank you for the video. I bought myself the Airless Sprayer. Will use this for the living room next week. With your video, I have a head start 😊

Top video mate well put together and explained very satisfying watching the walls being sprayed...always good to see the cheapy tools reviewed

@jelreviews

9 ай бұрын

Glad you enjoyed it

@gepeto1gepeto144

5 ай бұрын

J'ai la même et c'est parfait,a conseillé

got one of these , had it for 2 years now , replaced the hose and gun with a graco, poor hose and gun for the vevor , little bit of oil before use and still going strong using 3 times a week all day

Thanks a lot! Everything I needed to know, I learned thanks to this video!

@jelreviews

11 ай бұрын

Glad it was helpful!

Good on ya mate! One of the first videos I ever made was on one of these that I found and fixed from the dump. That was a couple of years ago. Been sitting idle ever since. I had a major house fire a few months back and now I'm about to use it for the first time. Your video really helped and inspired me a lot. I'll definitely video my first attempt as well. Cheers for putting this up bud👍

@jelreviews

8 ай бұрын

No worries, glad you found it helpful 👍

Awesome job well done! An excellent video review and application, cheers mate legend 👍

good insightful demo. The noise it makes is unexpected but the result looks good enough and the wide fan on the spray tip can make short work of big areas but it should be adjustable to concentrate the paint delivery. It's a capable looking unit.

How awesome is this tool, the garage is looking great mate.

@jelreviews

Жыл бұрын

Thanks 👍 Getting there that for sure.

Great clip mate👍

Noice!!! Im buying one now. How easy that looked

@jelreviews

3 ай бұрын

It's no Wagner Sprayer, but its definitely easy and did exactly what I wanted it to for peanuts.

Thanks . A will buy that.

this is super good!

Great Video, I have been looking at buying this unit as I have around 90 meters of fence to paint, and I sure aint doing it with a brush. I notice with the unit, the instruction manual is just about useless, so your vid was a great help. Could you please do a complete video on cleaning, and how to store the unit long term, say if you didn't use it for a year or more. I also notice that airless paint guns have a filter in the handle, does this unit have that, and how do you clean or replace it. Many Thanks👍

@jelreviews

9 ай бұрын

Glad it helped, Roger. Will try to get around to doing a cleaning video, I think you're right, that would be helpful. Thanks for the suggestion.

Nice video!! I’m so glad to find this!! do you have problems to clean the machine before painting???

@jelreviews

Жыл бұрын

Thanks! No problems at all, but the important thing is to clean it once done painting. I should have covered this in my video but I forgot. It took me about 5-7 minutes to clean it properly from the water-based paint in the line and then it's good to go whenever I need it next. Cleaning is simply running clean water through it until the paint is gone.... clean out the nozzle tip, and the I also took out the filter that is in the spray handle, ensured that was washed clean, and that's it. I haven't used oil-based paint through this, but it would be the same process, just use turps or thinners to clean at the end.

Great video, mate, just what I needed! One question: did you in- or decrease the pressure to get rid of the white lines at the start?

@jelreviews

8 ай бұрын

From memory, I think I decreased the pressure. Nevertheless, it's a trial and error thing, and is probably dependant on the type of nozzle you're using from what I understand.

@frankconijn3987

7 ай бұрын

I just had a Wagner instruction day on spray painting, because I have a ton of painting to do. They said that to cure it, you should first increase the pressure. If that doesn't work, dilute the paint. If that doesn't work either, change the nozzle for one with a smaller diameter, e.g. change a 519 for a 517.

Have you tried bigger nozzles, like the 523 or even 625? I have a hard time trusting the 2,2 L/min output, so any experiences with bigger nozzles are highly appreciated. Thanks very much for the video!

@jelreviews

2 ай бұрын

No, I've only used the standard supplied nozzles which did everything I needed it to. Thanks for watching.

FYI that extension should not have teflon tape on it. Sometimes you need a thicker white washer or 2 of the ones you have there. no tape. this will cause spitting.

@jelreviews

6 ай бұрын

Thanks for the tip, much appreciated. Will try it👍👍

How much paint does it use. You said 10l to do one coat which is a lot!

Thanks for your video. Did you dilute the paint?

@jelreviews

10 ай бұрын

Thanks, yes, I did 10% water to the water based paint. I was happy with that ratio.

Thanks so much great video have bought one for painting my roof etc . I have added plumbing thread tape on all threads to stop leaks ? Is this ok ?

@jelreviews

3 ай бұрын

The plumbing tape worked for me. 👌

Hi mate, great video. do you know how it would perform with higher viscosity paints. I plan to paint our tiled roof with roofing membrane. thanks

@jelreviews

4 ай бұрын

I'm no expert but I believe that would come down to the type of nozzle being used. This machine is capable of pushing paint just like any other airless sprayer, so I would suspect a larger aperture on the nozzle would be key for higher viscosity paints. In any instance, I'd be researching that aspect on how other sprayers achieve flow for such paints.

Good vid though mate.

Hi this is good for using oil- based for wood work

@jelreviews

4 ай бұрын

Yes you can, as long as you clean the sprayer properly afterwards with mineral turps.

Hey Mate, was just looking at getting one of these. The pdf manual doesnt have much information. Does the gun have a filter element in the handle? Thanks for the vid 😎

@jelreviews

11 ай бұрын

Yes it does ... Just unscrew handle part like any other spray gun handle and the long filter comes out for easy cleaning. I probs should do a video on this and how to clean it.

@loccomoffo1000

11 ай бұрын

@@jelreviews brilliant thanks for replying, just ordered using your code, cheers 👍🍻

@jelreviews

11 ай бұрын

Awesome, many thanks!

Hello for my first use I can not make it work I first tried it with water when I turn the black button for pressure it goes up to 2500 or 3000 and after it makes no noise and when I use the gun nothing comes out ?

@juancarlosnavarromontejano2

3 ай бұрын

Llevan una bola de acero que sube cuando succiona pintura,revisa que no está pegada por óxido o pintura

I Am So Surprise With All The Tools And Gadgets You Have, I Have Nothing But A Wheel Barrel. I Hate Painting Also.

@jelreviews

Жыл бұрын

I wish I only owned a wheel barrow... I'd have way more room in the shed then 😊

@Iseekoutthetruth

Жыл бұрын

@@jelreviews you got a Shed To?

@jelreviews

Жыл бұрын

Well, it's technically a brick addition I built onto my double garage where I do my work and have my man toys (tools). Currently a bg mess lol

good share❤

that's only a good how to shots, it can't get any better and shows really well and clearly what you have and how it works top

@jelreviews

Жыл бұрын

Thanks mate... Appreciated👍

I have traces of paint drops when I start and finish using the gun.....i see in your first action on the flor you have drops too.....do you resolve that problem???

@jelreviews

9 ай бұрын

Personally I don't think you can stop those drops on any airless paint Sprayer. I've owned other models before and same issue. For me it was acceptable but maybe a more expensive nozzle might decrease it a bit? Maybe check online for answers.

@wojciechmaajowicz4240

6 ай бұрын

You can use Clean Shot Valve, will solve the problem. Good presentation.

Is it really worth buying!? I've been reading a lot of negative reviews about this type of sprayers, im afraid it will be just a one time use before it brakes

@jelreviews

Жыл бұрын

No disrespect, but buy and believe what you want.... I've just shared my experience on video, that's the best I can do with using any product, whether I pay $300 or $3000....if you read enough reviews on any product you'll find pros and cons on all of them. All I care about is getting the job done and the wife being happy😂

@kaovi1978

8 ай бұрын

​@@jelreviewswife is main reason for all of us 😂

@jelreviews

8 ай бұрын

@@kaovi1978 Ain't that the truth😏

@johngaytes-ex7nt

Ай бұрын

Have you ever used an air less sprayer?

You take that plastic washer out, as it's sitting too far back in the thread, remove the tape and tighten right up it shouldn't leak. If it leaks it's not tight enough. No tape or washer for that part of the fitting.

@jelreviews

10 ай бұрын

Awesome.... Thanks for the tip. Will give that a whirl 👍👍

@olivierj.2435

7 ай бұрын

​@@jelreviewsDid you test it ?

Hi sir..i hve a questions, what oil u use for a few drop? What type of that sir?

@jelreviews

3 ай бұрын

It just needs to be some kind of light oil... I simply used air tool oil. 👍

@GalaxyGalaxy-lc5zd

3 ай бұрын

@@jelreviews tq so much.

This machine using water base or oil painting base????

@jelreviews

5 ай бұрын

Can use both, but I only use water based with this as much easier to clean.

Solo ad una testa di legno di un americano può venire in mente di colorare dei mattoni in paramano di bianco.. very good

Sounds like the motor is turning on/off everytime the pressure drops. Why is it not running all the time ? hmmm those voltage spikes ...

@paint_solutions

5 ай бұрын

Don't worry this is DC motor no spikes if you give perfect voltage and load carrying socket

@angelavalos499

3 ай бұрын

All the machines are like this they supposed to stop especially the good machines. They stop when they build pressure only turn on when needed.

Still have to brush that grout. Black lines with show like dogs balls. Spray is good but won't cover the grout without extra coats.

@jelreviews

11 ай бұрын

My wife was happy with the finish.... means I'm happy... means no more painting😂

👀💯😎👍👍👍👍👍👍👍👍👍👍👍👍

Why does it look like a Titan Sprayer lol

Ok dude, your paint machine has a lower pressure than your paint needs. If you look on the wall, you can see two lines on both ends of the spray. This indicates that it has incorrect pressure.😉

@jelreviews

5 ай бұрын

Thanks mate.... appreciate the tip.

@carstenlundmadsen3

Ай бұрын

How many turns from the end position should the pressure regulator have as a starting point for water based wall paint? Thanks

Ad amut

My review video is gonna suck compared to this one LOL.

@jelreviews

8 ай бұрын

Lol, any review is better than none, plus I'm sure your perspective and opinions will differ to mine. At the time, there was no review I could find on this sprayer which is why I did it... Thanks for watching!

@saneauto

7 ай бұрын

@@jelreviews Yours will still be the only one because the Vevor I got is a bit different model. I just finished the editing and will release the video this weekend. Paint all over LOL!!!

I've seen a lot of these on ebay, amazon and was wondering too either these are any good and reliable...In this review it does kinda look ok but the main problem for me is that the sprayer is reviewed by non professional. Someone who has an experiemce with more professional tools (or even some DIY level sprayers like Wagner 250 or Graco Magnum X5) most likely would point out some key differences. And yeah, another issue of course is reliability - how long thus thing can last!?

Wear a mask bro. The paint is airborne

Nie kupujcie tego sprzętu! Firma Vevor ma gdzieś gwarancje jakiej udziela na ten agregat malarski. Mój sprzęt nie działa! Nie chcą mi uznać gwarancji !

@michass.1895

3 ай бұрын

A co było nie tak z tym sprzętem? Sam się skusiłem, niestety co chwila wywala mi bezpieczniki

ure happy, your wife happy, im happy watching as well

Great demo mate, It does look like a great sprayer for the money.

@jelreviews

Жыл бұрын

Thanks, for getting this job done, bang for buck it was great.