Respect to all the people in the armed forces fighting for our freedom, wherever in the world you are stationed. 👍♥️

@elonmust7470

4 жыл бұрын

@Klip One see this is why I can't read the comments if PFI videos. I finally find a nice comment amongst "bra" comments & some loser has to write "cornball" underneath. Pfft.....

@MafiaboysWorld

4 жыл бұрын

@@elonmust7470 It's KZread, I expect atleast 10 people per video to argue and disagree with anything that comes from my mind on any topic, be it what I say on camera or in comments. 🤷 It's worse when it's MMA and Sports channels, usually multiply that number by five or six. 🤦

@t.g.1124

4 жыл бұрын

Freedom 🤔🤔 from where oh what ? Because the one from Iraq. Was about petroleum. Syria about petroleum. Plus sell guns under the table is more about this topic my blind people 😁✌

@elonmust7470

4 жыл бұрын

@@t.g.1124 "America is such a terrible place, that's why my whole village traveled 4000 miles to go there..." America is 250 years old dude, we are responsible for a who hell of a lot more than the war with Iraq, the one where NATO was in agreeance & compliant.. As for selling guns under the table, it simply does not happen where the seller is an FFL holder (I've been to gun shops & gun shows all over the country, it does not happen.), yes private citizens make 3rd party transactions all of the time, but the crime associated with those sales is pretty mucn nonexistent, in my demographic at least... I hope you don't live here in America dude, that would make you one big hypocrite.

@wesley8599

4 жыл бұрын

Much respect. And to the thread of comments here, just remember whatever reason a war may be fought, the service and dedication of all serving deserves respect. Don't let any part of the situation dissuade you from that. Love and Respect

Phong's DNA test came back, 100% All-Motor

@Wafflebrah21

4 жыл бұрын

#1 comment

@claudedottin1312

3 жыл бұрын

Ahahahaha

@JAG220.

3 жыл бұрын

😂🤣🤣🤣🚀🚀🔥

My son, Alex Haak is the veteran that did the build! Awesome job!!!

@Underpantsniper

4 жыл бұрын

Your son should be proud of what he has built, it is a very clean little set up. 400hp on a single cam engine is fantastic!!

@TheRadChannel

4 жыл бұрын

I bet I speak for all of us here; we need engine build specs!!! He did a great job!

@detonationpyrotechnics4156

5 ай бұрын

You should be very proud of the man you have raised mama .

@billiedean9218

4 ай бұрын

Would love to have Brent tune my crv when I get done with it but he's so far away.😢

WE NEED STREET PULLS FROM MEXICO AFTER ALL THESES TUNES LIKE THIS SO THEY SEE IT!!!!-@

@1chip4you

4 жыл бұрын

Gerard Cowan Yeeeeeees.

@1439of2000

4 жыл бұрын

Hard to gauge with snow on the ground

I love how Jamie knows everything lol, best right hand man there is!

@mcleppercon

4 жыл бұрын

Its just an all around great team

@GreaseMonkGarage

4 жыл бұрын

It’s google ....

@MrAyybee2cold

3 жыл бұрын

@@GreaseMonkGarage lol yeah no

I love single cam content, so relatable for so many people! Love my Turbo Z6!

18:05 phong just casually resting on the car while its doing a pull lol

@Cre8toR87

4 жыл бұрын

@27:50 too lol Champion.

@spar8334

4 жыл бұрын

Ye he crazy ive seen tires blow out and straps break

@stranger534

4 жыл бұрын

He's thinking "Not NA, could lose another 800 lbs, sounds like it's not ported or dimpled, the exhaust is too quiet....." I can tell these are the things that keep Phong up at night

@Cre8toR87

4 жыл бұрын

@@stranger534 😂😂😂😂

@MadMaxx570

4 жыл бұрын

He's probably so used to N\A noise levels that he didnt think it was running

"Phong won't even look at me when I talk about turbos"

@danielkennedy9152

4 ай бұрын

What he say 😂😂

Seeing phong hanging out in the shop makes me happy.Good content guys keep it up

@raidnova1474

2 жыл бұрын

I know right phong is just cool lol .

Im suffering from bad anxiety and yalls positivity helps me thank yall so much wish i could get my rex tuned by yall

@ibrooksie

4 жыл бұрын

Sending positivity. I also suffer. You got this bro.

@joemartinez21024

4 жыл бұрын

@@ibrooksie thanks bro i hope u have a good day

@CraftsmanQuad19

4 жыл бұрын

Rex...is that a WRX or did autocorrect spaz out at CRX? I had really bad female induced anxiety for a few years. Finally cut her out and have never felt better. Keep pushing bro, shit gets better

@joemartinez21024

4 жыл бұрын

@@CraftsmanQuad19 thanks bro and yeah females will do that bro...... its a crx

@mcleppercon

4 жыл бұрын

Just move at your own pace brotha things get better when you have a positive outlook on life. I would definitely have to agree with you about how positive everyone at pfi is. There just all so humble and great people!

Phong, Brett and Jamie make my day. Watching them perform surgery.

That's a wicked amount of power out of a 1.6L! Thanks Brent for the video, and thank you Andrew for your service.

Love single cam. I'm finishing my single cam shortly would love to have brent tune it.

Love the way that Brent conducts his tuning - very methodical and thorough! #Respect

as a vet to a vet thanks for your service and welcome home man! enjoy the whip!

That's one of the cleanest single cam build I've seen! Beautiful car! Love those wheels! That baby might put my current build to shame when I'm done! Love it! Props to the owner on the beautiful car!!!

Jamie and dial a bombs😂 “Just give me a little bit”... Jamie- 6 turns😂

Always love me some single jingle content!! PFI is so RAD!

I haven't seen every video on this channel but this one showed the most professionalism and teamwork I've seen here so far. Very nice to see. Y'all worked really well together.

I'll never stop admiring this build. So neatly done and sounds very healthy!

First one I've seen with no exhaust smoke anywhere at anytime

Building my y8 for 600 this winter, this is definitely inspiring. 👍 Love watching all the different content you guys put out.

@krulestreetkarzproduction2754

4 жыл бұрын

I got 500hp finishing up on my y8...

@matthewsanchez956

Жыл бұрын

Speedfactory rods and vitara pistons can get ya to 500 for only about a month tho lol

@Casey_and_Cars

9 ай бұрын

Speed Factory rods are trash. Compression is way too low. VHB Engines high compression Viatars and Ebay H beams, are a far better setup, and raises compression to 9:1+

@iammaiky2797

7 ай бұрын

I have speed factory rods on my turbo d16z6 making 542hp been running the same set up for 2 years now and its still ripping @@Casey_and_Cars

@gotti4519

7 ай бұрын

@@Casey_and_Carsthankfully you want low compression for boost

That's beautiful. One of the nicest bays I've seen in your shop!

This has to be one of my favorite cars I've seen on the channel. Not exactly sure why but it is.

@MrBassbump

4 жыл бұрын

The chop chop from a 1.6 might be the reason

Hey Brent it's Charlie thanks for the tip on using welding wire in a tight spot to pull on a tention pulley that was a great great tip..👍

Life goals- Build a Honda motor for boost and have Brent tune it...

@neo1231

4 жыл бұрын

Not as great as you might think, he doesn't have a rpm input and can't see if the torque is rolling over with timing. Pretty much just a half ass tune

@NeoMK

4 жыл бұрын

@@neo1231 Yeah I mean he totally half assed the tune, he could have totally gotten 439hp out of that 1.6 liter... 🤔

@neo1231

4 жыл бұрын

kzread.info/dash/bejne/n2GHzJqQm7quZqg.html

@neo1231

4 жыл бұрын

Hp sells cars torque wins races

@wheelietime7062

4 жыл бұрын

K Charles

Awesome single cam tune!!!... Fantastic efforts by all to get the most it could give. ✌️out and be safe out there...

Those d16's are still killing it 30 years later, always impressed by the builds I see of them.

It's just something about the soch builds that i love so much. I mean wow. All that power from such a tiny engine. Honda rocks..!

Such a cool single series that the pull with the 345 sounded sick. Awesome job guys 👏👏

This is so rad yesss for the moon tune on this single cam 🔥🔥🔥🔥 keep up the videos it's just so awesome to watch and good to see goofie built videos get that much better keep up the hard work lads

I genuinely enjoy watching this channel. Its litteraly like working on your cars with your friends no scripts no bs with faking accidents and blowing engines

Damn imagine losing a money race to that clutch pin coming out😂🤦🏻‍♂️

Thank you for your service Andrew stay safe love your eg single jingle build

You guys seriously have the best Honda crew out there between Jamie Fong Brent and the rest of the team. With all of your guys connections I just feel like as far as the Honda dream team you guys have it in the bag!

Successful people always have haters, As a mechanic I am not one of them, Because dedication like Brent shows is 100% PRICELESS 👍🇺🇸.

Thank you for your service. Sweet build.

thank you for your service Andrew!

Brent is the happiest person I know. He loves what he does

Hell Yeah... Let's Go! Awesome tune video Brother and that 1.6 build is rowdy sittin in a clean hatch Nice job to the builder 👍👍 PFISPEED/BOOSTEDBOIZ Rcks!!! 🤜🤛😎🔰🔰🔰💪

Not bad for a single jingle!! Nicely done pfi!!! This guy is gonna rip!

What a sweet little rocket! Brent, you have the best job my friend!! PFI crew are awesome!

I just wish yall ripped the tuned cars on the street at the end of the vid everyone loves street pulls

@CKing724

4 жыл бұрын

I heard Mexico is only a 20 minute drive from their shop to!

@paulcauldwell8491

4 жыл бұрын

@@CKing724 State of New Mexico is, but not actually Mexico itself. Sombreros at the ready! 😁

@smoothpotato957

4 жыл бұрын

Paul Cauldwell you ruin it for everyone Paul, go back to America we all live by the border

@trollslayer8260

4 жыл бұрын

I wouldnt see many people being cool with bald tires and no clutch when they get their car back.

I learn so much on this channel 💪 thanks guys 👏👏👏much love from Detroit👍

Dude y'all rock. Love the excitement from the guy doing the pulls... Cant wait to see this stuff for myself in oerson

Great power!! Strong straightforward build!

Man that is awesome. Wow!! Encore pull-and it still has more in it-if Andrew puts a electronic boost controller on that beautiful setup he will really need to strap the block together. Brings back memories here.🥳

891st! WOW, haven’t seen Phong for years. He finally took the leap into TURBOs. His engines are always so perfect. Great job Brent and the gang. Roger in Pierre South Dakota

trim texture is stuff we used to put on plastic archways for drywall corner bead. it's real sticky

Veterans rock thanks for the service

Man that last pull was crazy great video man! Started with mid 200s all the way up to 438! Damn!

Sunday night viewing sorted , thanks again Brent 🤙🤙

18:05 Phong thinking i could gap this with my all motor

@brendanmccarthy492

4 жыл бұрын

He could. Phong runs mid 10's in that light asss car.

Man, it must be one of the best feelings to have your car tuned by PFI and get to share the memory with thousands of people.

It's awesome to see there is still love for the D series!

You guys are awesome,wish I was closer to your shop. I think I had more goosebumps just watching the last 4 pulls than y'all had there feeling it rip 😂😂😂 Great Job with the build Andrew and thank you for your service Sir. Guy on ecu calibration is clearly loving what he's doing and doing what he loves. I'm an new fan for sure 👍🏻

Very insane numbers for a single cam build! But with the right parts and the right person building/tuning it makes all the difference!!

Jamie is superb at describing what is going on! top work

Man it's so nice having Phong at the shop! 🦅🇺🇸🦅

Thanks to Andrew for his service! Love the video. Really like Learning and the PFI Fam knows so much. Hope you guys get up north to track close to me.

Love yalls content! I learn so much about Honda motors watching yall! 🤘

The good attitudes the good times earned a sub.. keep up the good vibes 🙏

Love the singles! Can't wait to be done with mine and see those same numbers.

It's easy to tell when Brent is starting to have some fun. I think there's only one laugh like the world. lol 😎💯

love going back over these vids. single jingle haha. what an awsome job man.

People often overlook the single cams. Sweet work & thanks for the service.

I do drywall for a living and I use trim Tex adhesive all the time 😂 that stuff is awesome

Great to be back to the ol dyno videos love it!

That thing runs great. No smoke! Solid build!

Something about a 1.6 sohc with big power that always made me smile

D series getting down boiii 🔥🔥

Jamie can run his own shop for sure. He has a lot of knowledge and is just a genuine all around guy

I fell out of the Honda scene about 10 years ago but man, after watching this video makes me want to get another d16 hatch!

@brentiaconelli6484

4 жыл бұрын

The Honda aftermarket support is insanely advanced from 10 yrs ago. There's transmission gears that actually hold hp and cheaper parts

Y you worried it was built by a veteran. there the best mad respect and thank you for all u have done man cheers great vid pfi..😎😎😎😎

Absolutely AWESOME build, I actually am in the process of building a fully forged 1997 D16Y8 civic coupe with block support system and hope to make 550 in race tune and 350 in street tune!!!!

Thatd be a fun little car to play around with on the street 👍✌️

440 on a stock sleeve build I like. No matter what motor d h f b k they all make power with a snail on her back

Watched this video few times. Just got a hold of a unfinished project eg6 with F22b1 swap. Considering dropping a d16z then looking into turbo setup. Enjoy yalls videos

Man if y'all were closer to the East coast, I would definitely want Brent to tune my single cam. Not on camera though, lol

I painted my z6 valve cover that same wrinkle black and have the same blue washers and wires lol

Friggen LOVE watching you guys! Impressive numbers..looking forward to seeing a block gaurded/sleeved D🤤

@JMontaque

4 жыл бұрын

Welcome to the 400hp+ singlecam club bro. This baby can take more boost! What rpm does it rev to?

I just met the guy that has this civic in Colorado Springs, verry dope build 🔥🚗🧼

Sounds amazing , beautiful set up

Awesome build. What a blast!

I just watched a 1320 videos clip about a 600HP all motor Civic and all I could think is Phong will be partying with this guy one day soon and battling for the US record one day soon because no one knows all motor better than Phong

@relate97

4 жыл бұрын

I swear I got on that video like 3 mins after it was uploaded and half the comments where pfi and phong lmao

@larrysutton6530

4 жыл бұрын

@@relate97 I wanted to say something about Phong but I didn't want to down play what that gentleman did

@J_Ike845

4 жыл бұрын

Phongs car is a tube chassis car , the JBR car is a stock chassis . Two different classes

@relate97

4 жыл бұрын

J Ike you typing that same comment on both videos lmao

@J_Ike845

4 жыл бұрын

Bryan Smith A lot of confused / misinformed fans 👍

Not a Honda fan but I have to admit, that was entertainment!! Stock crank though with all those nice parts.

Love how passionate u guys r

Single Jingle for the win! Good work guys.

Love it single cam rocket good job guys!!

great vid Brent thanks bro, loved the ending !

That build sure is very solid sounding 💪💪 very impressive

Gotta love some single jingle content every now and then

Hey Brent and the PFI guys, I love watching these extended cut type tuning videos of yours. Something I can't help but notice that people are almost always unprepared for the dyno. It gave me the idea to ask you to make a tutorial or educational type video. Maybe detailing what you should go over before bringing you car in to save time. Forgive me if you've made this in the past i've only been watching for like 1.5 years. I love all the content. Keep being great people.

@5PYZ3R

4 жыл бұрын

kzread.info/dash/bejne/om2Zl9yed6eehNo.html

@shiffer253

4 жыл бұрын

@@5PYZ3R hey thanks. I must have missed it. I honestly didn't look though lol. thanks anyways.

So glad to see Honda’s still gettin it.

Tell Andrew I'm a fan! Lol wicked little thing!

Awesome work y’all always kill it!!

that boy did a great job for his parts list on this build the only thing that could let it down is the stock crank. I don't know what a stock Honda crank can take under boost but with the rotating assemble he used it's a solid street or track package that should run for years .

Ohh hell yes. Cannot wait to get my y8 cracking

That was cool guys keep doing what you guys do.

That was a lot of fun to watch !