Thanks for this, you showed me I need the high speed for my application. Cheers.

Thanks for taking the time to make this

@toolstorybro

11 ай бұрын

No worries! Thanks for watching!

I didn't know these existed. I love my manual Vessel so much I bought two. I NEED these. Thanks for the video!

@toolstorybro

11 ай бұрын

Awesome! Once you try these you’ll definitely find a place for its use. I’ve almost ditched my ratchets. Between this and a Wera Tool Check. I can get through most jobs.

I think you’re the only guy on KZread with all three. THANK GOD! please make more videos on them. I’m trying to decide which one to use on a breaker box and receptacles.

Thank you!

I just bought one on ebay on the way havent had a chance to check it out the 3 speed

Great channel name. good content.

@toolstorybro

11 ай бұрын

Thanks! Appreciate it!

Does it look like removing the screw on the side would allow the the driver to be opened for battery replacement in the future?

I think the high speed 1200rpm version is the most practical. The other two, not so much. The high torque will just make it spin in your hand. I sold the 3-speed one and bought the high speed version.

@toolstorybro

11 ай бұрын

Absolutely. I’ve been running the higher speed one more and more. I find myself reaching for it more than the others. It’s actually in my edc for the week!

@ks-hg5vo

10 ай бұрын

Was on my list but the EU has just passed law that items have to have user removable eplacable batteries to avoid becoming disposable so will wait a little till they redesign.

@pengasus

5 ай бұрын

Who cares. Just buy it from overseas@@ks-hg5vo

@Huskiefluff

3 ай бұрын

I currently have the high speed and its just got no beans. It can't even drive most screws I throw at it. It's nice if you just use it on small ph1 sized stuff but man, it can barely do most things easily.

@alpinecontentsolutions5926

3 ай бұрын

@@Huskiefluffthey aren’t meant for driving screws into wood/hard materials.

Heavily debating on getting one of these.

@toolstorybro

10 ай бұрын

Didn’t think I would need it but now I have it I use it more and more .

@iwenive3390

9 ай бұрын

Yeah you will never not take it with you after you have one

@toolstorybro

8 ай бұрын

@@iwenive3390 such an underrated comment. Definitely near or on me most of the time

Good afternoon, I would like to know where I can get the electric drill, thank you

Remember, these use the 13mm shank vs the E6/C6 shank.

@toolstorybro

10 ай бұрын

Good point! I’m pretty sure the three speed can accept both. I will double check

@iangregoryhome

8 ай бұрын

They all take both ,50mm or a bit holder will be required.

@Servingsince

8 ай бұрын

@@iangregoryhome You can put the smaller bits in, but they will not stick out because they are too short. You need to use the longer, at least 25mm, extended bits.

@ggrimm79

5 ай бұрын

Morgan's Maintenance ground off a piece of a bit and put it in the 3-speed. Now the non-Japanese bits fit with less slop than the Japanese bits did without the spacer. The piece stays inside until you disengage the bit lock and tip the driver upside down.

gut danke

Are they throw away when the battery dies? How do they charge and how long is the charge time?

@Huskiefluff

3 ай бұрын

3 speed p1 is USB c. The high speed and high torque are micro USB.

About how many ie sockets plate will it do before it will require changing.

@konstantine381

5 ай бұрын

Loads. Managed to last a day without charging before and even when I did need to charge it charges really fast, dropped it a couple times at height and it’s still going.

@richmondstar4354

5 ай бұрын

@@konstantine381 thanks…will consider one.

Can you order straight from japan to US?

@iwenive3390

9 ай бұрын

Yes

price?

@toolstorybro

11 ай бұрын

Links in description. Will depend on your currency but around $60aud

@user-lp7dd7dz9m

11 ай бұрын

@@toolstorybro Thanks. CA prices are simlar to AU

@bevanbraganza6577

11 ай бұрын

​@@toolstorybro checked your link, how much was shipping off japan amazon to aus? Good content man 🤟🏼

@toolstorybro

11 ай бұрын

@@bevanbraganza6577 thanks mate it’s about $20 aud but try to get as much as you can in one order. as they ship in quite a large box. Could prob get three screwdrivers in that box easy

@iwenive3390

9 ай бұрын

Dumb cheap

If you're a limp-wristed electrician get the low-speed Hi-torque, If you're a masculine electrician get the High speed, If you're not sure get the three-speed.

@toolstorybro

10 ай бұрын

That’s a good way to put it 😂!

@whatfreedom7

10 ай бұрын

Which one is better for automotive use ? Most on stuff like door panels,plastic ,interior, Etc

@wayward-saint

2 ай бұрын

I can’t imagine any electrician would be limp wrested enough to need the high torque model. Hand torquing is always best.

Can hardly hear you

Get to the point geezzz

You dont half waffle on lad. Get to the point and stop mumbling like a child

Electric screwdriver? This makes me sad. Tortured by weak men…. My god, but your back into it. Use your dam hands.

@maximumyt2857

Ай бұрын

an electric screwdriver saves time and money, you think real men should use a leatherman instead of a chainsaw to cut down a tree?