Verus Engineering Front Camber Plate Assembly Install - Mk5 Toyota Supra
Автокөліктер мен көлік құралдары
Introducing the Verus Engineering Front Camber Plate Assembly for the Mk5 Toyota Supra. In the following video, Eric demonstrates the installation process for this kit.
-----
Front Camber Plate Assembly - MkV Toyota Supra: www.verus-engineering.com/sho...
-----
Facebook: / verusengineering
Instagram: verusengine...
Twitter: / _verus_
-----
Music provided by: CFM
-----
Chapters:
0:00 Intro
1:14 What Come's In The Kit/Tools Needed
1:24 Install
8:05 Signing Off
Пікірлер: 21
Are you able to adjust for more positive camber, say when you install lowering springs as it adds more negative camber, i’m trying to prevent inner tire wear
@mattpapa03
Ай бұрын
Was wondering this too. Dont wanna wear out my tires prematurely
@VerusEngineering
Ай бұрын
These are negative only.
I assume you can adjust the camber while the strut is installed, looks like a tight fit in that small circle in the chassis.
@VerusEngineering
Жыл бұрын
Yes, camber can be adjusted once the strut has been installed.
Does this replace the factory strut bearing?
@VerusEngineering
2 жыл бұрын
No, it does not.
will this work wiht the HKS spring coil sleeve kit?
@VerusEngineering
3 ай бұрын
If the units typically use the OE camber plate, our camber plate will work as well.
Can you confirm if there is more noise vibration with this part?
@VerusEngineering
Жыл бұрын
There is minimal noise and vibration difference, but there is a slight increase due to the style of our camber plates vs the OEM units.
@davidkelly2542
Жыл бұрын
@Verus Engineering would this part be road compliant?
@VerusEngineering
Жыл бұрын
@@davidkelly2542 yes.
The correct term instead of “clicks” is ugga dugga.
@VerusEngineering
3 жыл бұрын
Not too tight, but just tight enough! haha
How does it look?
@VerusEngineering
2 жыл бұрын
Not much to see once it is fully installed, but we have a handful of images available on the product page on the website.
@patrickmartin5633
2 жыл бұрын
@@VerusEngineering Hey, I can see all the install pics but was wondering if there are any pics on how the wheel looks on the car. Cheers.
@VerusEngineering
2 жыл бұрын
@@patrickmartin5633 Not really sure what you are looking for. The wheel would look the same unless you adjust the camber. These camber plates offer up to -3 degrees of camber.
@patrickmartin5633
2 жыл бұрын
@@VerusEngineering I cant seem to find any pics of how the car looks with the -3 degrees of camber. I just want to see the stance.
@VerusEngineering
2 жыл бұрын
@@patrickmartin5633 It's not very "stancey" per se. -3 degrees is not a whole lot, but it is perfect for track use. Unfortunatey, we do not have any photos to share of this.