I am also impressed with your build of the panel saw! I know this is an older video, now - and you mention in comments that you have a newer design. If you still have them, I would love to receive a copy of your DIY plans as well! [edit: email removed - plans received]
@crossgrainwoodproductsltd92303 жыл бұрын
This has to be the nicest panel saw setup I've seen.
@AlexPSNB
3 жыл бұрын
Thank you
@ParleysWoodedJourney6 жыл бұрын
Thanks for the plans. Now I know at least one project I want to tackle this year. :)
@anrivera118 жыл бұрын
Very nice panel saw!. Has everything I am looking to build in one.
@danutvasiliu39198 жыл бұрын
best DIY vertical panel I have seen so far. Can I dare to ask for plans? That would be awesome. Thank you!
@johnwurst66917 жыл бұрын
Best one I have seen! Great concept, looks easy to use!
@matermark9 жыл бұрын
Great job you did on that panel saw! I think I recognize the way that it attaches to the pipe as a ShopNotes version, I will have to look for plans. What modifications have you made to improve the original plan?
@xXLLcOoLDiEgOXx11 жыл бұрын
amazing !!!im from cancun mexico and we dont have all the parts to make it but im waching all the vertical panel saw videos to take the best way to make it
@NathanNostaw10 жыл бұрын
Thanks for the plans. I see you have a few tweaks on the original plans. If you were to make another, are there any other changes you would make? Do you find when making a ripcut/horizontal cut you have the top board trying to bind the blade? Is the horizontal rest for the board sacrificial on vertical cuts?
@rocketburner31910 жыл бұрын
very clever consruction seems to be very handy and easy to use i prefer a vertical panel saw because its much safer than a table saw may you always keep your ten fingers best regards from germany
@jamesrigelman71548 жыл бұрын
Great panel saw and great video. I wish I would have seen this years ago. Any Chance I could get the plans for this too???
@armanflint12 жыл бұрын
Very Nice... The conduit with rollers makes it super nice.
@eduardocosta90787 жыл бұрын
Hi Alexandre, that´s an amazing job, congratulations!
@josephjoe90887 жыл бұрын
Great video. I love it. Could you please send me the plans
@TheChsmith6 жыл бұрын
This Panel Saw looks like the same plans that appeared in Woodsmith magazine 8/2014. It looks like you have different verticle guides, added rollers on the lower rail & your upper guide is pipe rather than 1-1/4 EMT. I ordered a set of plans but have not started my build yet. I plan to rotate my saw via a center point & locking pin (raise the blade & plunge in zero clearance slots) I hope it works) Good build, how long did it take you to complete?
@AlexPSNB13 жыл бұрын
yes it took about a week to get all the parts together and it was basically done using the Shop notes design with a couple of alterations to that ,glad you liked the saw
@bpez31063 жыл бұрын
Great job. I assume that you could also make an adapter for a router? I have been thinking of this for awhile and think for the investment and for limited space, this would be a better option then a table saw. Do you charge for the plans? Thank you for your time
@carlosmario59917 жыл бұрын
Congratualtions, Alexander. the best designs I've seen I would love to have a copy of the plans if possible, I thank you in advance.
@AlexPSNB
7 жыл бұрын
MARIA ANTONIA send me your e mail address
@carlosmario5991
7 жыл бұрын
Alexander Birnie Hi, alexander, my e mail address is carlosmario20142014@gmail.com
@martinwalters19546 жыл бұрын
Great design. I see below you are willing to send plans. What type format are they in? I use Sketchup mostly, but let me know please. Again, great design and execution.
@kcswampertb3 жыл бұрын
great job how is half sheet stop in there
@projectsforcreativeminds17973 жыл бұрын
This is the best budget sliding panel saw vid iv seen, there is a guy whos made a computerised one which is also fantastic but this saw will appeal and satisfy many woodworking enthusiasts. thank you so much for sharing.. if you would be willing to sell me a copy of the plans so that i may copy some of the ideas for my own id be very grateful, thank-you.
@arjoy19958 жыл бұрын
owesome design .... best of all. can you share the plan ?
@AlexPSNB11 жыл бұрын
Hi there the timbers behind the panel being cut are sacrificial and come time will need replacing these are still the same ones iam using on the saw from the first day i started using the saw and as yet havent replaced any.hope this helps
@bauenmann13 жыл бұрын
Hi Alex, Fantastic piece of equipment - I've been think of building something similar for a while now. Two questions: 1) When doing a length-ways cut (horizontally), what if the cut you need to make happens to be right over one of the horizontal supports, above the mid-fence? Won't you cut into it? 2) Similarly, when doing a cross-cut as you demonstrated, don't you cut into the fence?
@hoplahey11 жыл бұрын
At 8:04 what prevents you from cutting into the resting board (where your panel rests on the rack).
@yvesvallieres32007 жыл бұрын
This is great design. Would it be possible to have the plans please? Also one silly question, what happen when you have to make a cut that ends directly on a back support stud?
@AlexPSNB
7 жыл бұрын
send me your e-mail
@AlexPSNB
7 жыл бұрын
the back supports are sacrificial
@66kushy7 жыл бұрын
just what i was looking for, could i bother you for a set of plans. would be greatly appreciated. thank you very much.
@heikofranz51287 жыл бұрын
Hi Alexander, that is one heel of a design, could I trouble you also for the plan? Thanks heaps
@deezynar13 жыл бұрын
That's very well made. Is this based on the plans that Shop Notes had?
@simonsimon40512 жыл бұрын
what happen at the end of an horizontal cut when all the weight of the upper piece of wood push against the sawblade? What prevent this?
@valdircristinosilva4998 Жыл бұрын
Belo trabalho irmão, parabéns . Mostra como vc fez esse sistema de molas p subir e descer a máquina
@AlexPSNB
Жыл бұрын
Olá, as molas eram de um antigo conjunto de exercícios de peito que eu tinha por aí, mas você também pode usar alguns pedaços de elástico de borracha, isso faria o mesmo trabalho, usei isso na segunda serra que fiz e funcionou tão bem quanto as molas
@AlexPSNB
Жыл бұрын
Me mande seu e-mail que te mando algumas fotos da segunda serra que montei, que funcionou muito bem.
@mirobotcnc68416 жыл бұрын
Hi. Nice job! I'm in the process of making one. I've the idea but have some thoughts on the bearings.. can you tell me how did you put them?
@AlexPSNB
6 жыл бұрын
send me your e-mail address
@matteocoscia92458 жыл бұрын
it is indeed a brilliant design, would love to see the plans if possible!
@AlexPSNB
8 жыл бұрын
send me your e-mail address Matt
@matteocoscia9245
8 жыл бұрын
mcoscia@yahoo.com, thanks so much!
@dustmedia1218
7 жыл бұрын
ME as well - gerrie@dustmedia.co.za
@Bicongerman8 жыл бұрын
Hello Alexandre, are you able to email plans for this? I got really surprised about your design!!
@Kucciolo7711 жыл бұрын
Hi there, I am Italian and I really would like to know if you have a plan to build your vertical panel saw. Your job is great. Thank you.
@edbuell6712 жыл бұрын
@AlexPSNB Alex can you post a couple pics of the rollers and the central support you added . we are getting ready to bhuild one that will handle 5X5 sheets for the NortheastWoodworkers shop near albany ny.
@hughterry60710 жыл бұрын
Great job. trying to get one together
@jairoalcidesvillamarin86655 жыл бұрын
Desde Colombia gracias
@romadalessandro69547 жыл бұрын
Congrats. Great looking tool. I know I'm commenting a little late but is there a chance I can buy a set of plans? Thank you
@AlexPSNB
7 жыл бұрын
send me your e-mail address
@heltonsilva95848 жыл бұрын
Boa tarde Alexander Birnie, gostei do seu invento como faço para adquiri seu projeto.
@thelosttexan17177 жыл бұрын
Beautiful job! was hoping you could send me a link to the plans. or whatever is best thank you.
@AlexPSNB
7 жыл бұрын
send me your e-mail
@emmanuelbusto46929 жыл бұрын
Alguien me puede decir como hago para que el disco no me toque en las maderas de atas de la maquina? gracias
@Jayson1940D1411 жыл бұрын
Do you still give out plans for this panel saw? Thanks, Jayson
@nelsonmeza77843 жыл бұрын
Excelente trabajo....Podrías facilitarme los planos y medidas...Gracias
@mustaphaben2921 Жыл бұрын
Hello any plans ?
@wattvaktarn Жыл бұрын
Hello, is it possible to get plans for ths amazing design?
@AlexPSNB
Жыл бұрын
Send me your email address
@davidquintana56179 жыл бұрын
Very Good Job I like It.....
@stevendavis74567 жыл бұрын
Nice!
@Irene154512 жыл бұрын
Alex, Very nice construction! Where can I find the shop notes design you used? Thanks for your video. You wife did a good job with the camera and sound also. Reuben
@Mr2at10 жыл бұрын
now thats clever. Bravo
@shadetree10108 жыл бұрын
Great design! Could you email me a copy of the plans? Thanks
@leelawrence2215 жыл бұрын
Great video - can you send me the plans. Thanks
@SHRIMP111127 жыл бұрын
are you still sending the plans out
@OneManBandWoodworks8 жыл бұрын
This is one of the best designs I've seen, are you able to email plans for this?
@AlexPSNB
8 жыл бұрын
+One Man Band Woodworking send me your e-mail address
@OneManBandWoodworks
8 жыл бұрын
+Alexander Birnie Thank you, message sent.
@saxofono2011
8 жыл бұрын
+Alexander Birnie , please can you send me plans for vertical panel saw? thank you
@mattweaver32773 жыл бұрын
I love this idea. Are the plans still available.
@AlexPSNB
3 жыл бұрын
Sende your ail address
@mattweaver3277
3 жыл бұрын
@@AlexPSNB mweaver527@yahoo.com
@Burdennnn11 жыл бұрын
Good day, i wonder if you will still have the plans for this machine... Could you please let me know if you do, i used to have my own woodworking company, and due to financial problems was forced to sell all my equipment... Im thinking of trying again. but dont really have the money to do so... PLEASE help me!!!
@nejobsteve12 жыл бұрын
if you have planes on how you did this would love them
@PADZERFAY097 жыл бұрын
is it possible to send me plans? brilliant idea.
@tomhill40036 жыл бұрын
Very Nice! Please make the plans available!
@AlexPSNB
6 жыл бұрын
Send me ur E-Mail
@SPITFIRECARPENTRY13 жыл бұрын
i love the inventiveness of carpenters
@bobbg9041
6 жыл бұрын
Look out when they figure out they can also use metal cutting tools too.
@augustoascanio86509 жыл бұрын
Buenos días, disculpe usted podría facilitar los planos de esa sierra vertical.. Gracias
@RoyThe4th5 жыл бұрын
Thanks for sharing well done
@sherbetlemondesign6 жыл бұрын
Fantastic design, could I get a copy of the plans or purchase a copy?
@AlexPSNB
6 жыл бұрын
David Ward Send me your e-mail
@sherbetlemondesign
6 жыл бұрын
Many Thanks dave@versarack.co.uk
@33LEANDROHER2 жыл бұрын
Excelente
@PaidinFull2024 Жыл бұрын
Excellent craftsmanship! Are these plans still available?
@AlexPSNB
Жыл бұрын
Send me Ur email address please
@AlexPSNB
Жыл бұрын
Birniealexb@gmail.com
@remiixedreview4790
Жыл бұрын
Did you end up getting the plans?
@matermark9 жыл бұрын
ALSO, what's the maximum capacity? Can it cut 5x5ft Baltic birch sheets?
@truebluekit
9 жыл бұрын
He did say it will cut a full size 4'x8' sheet.
@bpez31063 жыл бұрын
Opps, hit send to quickly. What sort of accuracy are you getting?
@AlexPSNB
3 жыл бұрын
The saw is very accurate for sawing panels to size,send me your email address will send them onto you
@bpez3106
3 жыл бұрын
@@AlexPSNB Thank you for your quick reply. Email prince.barnwood@gmail.com. Stay safe
@AlexPSNB13 жыл бұрын
yes it was i just made a few changes to the shop notes design
@franktrough60657 жыл бұрын
Hey brother great job done here, I would gladly purchase one if you would be willing to sell one except the saw I have two. Which is why this project would be good to use one on.
@sailingcatcharay11 жыл бұрын
Super!
@jessielove797 жыл бұрын
Thank you
@davetierney70858 жыл бұрын
cracking saw, just what im looking to make, can you send me the plans
@AlexPSNB
8 жыл бұрын
Send me your address
@Marcellus746 жыл бұрын
Dear Sir, I am gathering all the material to build a similar saw, thank you for your video and details about it. Can you please tell me the kind of spring you used to compensated the weight of the tool ? They look like garage door springs but the wire diameter of these is always too big and the springs are too stiff. Thank you for your help. Best Regards, John
@AlexPSNB
6 жыл бұрын
John Martin it was the type that is used on the old type of chest expanders. My latest saw that I built uses the rubber bungee cord and it works just as well
@Marcellus74
6 жыл бұрын
Thank you very much for your answer, I just found a used "brand new" arm stretcher with 3 springs 2km from my home for 5€. Thank you for the tip ! Building of the saw can carry on...
@AlexPSNB
6 жыл бұрын
John Martin okay that's good you have managed to get springs..I wish you success with your build.
@erichesketh6028
6 жыл бұрын
Alexander Birnie . Can you please supply copy of plans for your diy panel saw ? To elphesketh@googlemail.com
@miltonaugustosilva506511 жыл бұрын
Hello Mr. Alexander, my name is Milton, I´m from Brazil. So, I would like to buy the plans of construction of this vertical panel saw. It´s possible?
@papaike25 жыл бұрын
Alexander sure looks like everyone is wanting the plans for your saw how about it?
@AlexPSNB
5 жыл бұрын
Send me your e-mail address bud
@33LEANDROHER2 жыл бұрын
Super top
@user-jn9zj7mj1l4 жыл бұрын
رهيب عاشت ايدك
@Pucallpillo6 жыл бұрын
Hello, I repeat my congratulations ..... that good work, the best I've seen, and I wrote a year ago and now I would like to know if you can sell those plans, excuse the insistence.
@AlexPSNB
6 жыл бұрын
Mario,send me youre-mail address and i will send the plans on to you
@Pucallpillo
6 жыл бұрын
Alexander Birnie ..... my mail: mueblescovalto@hotmail.com and mueblescovalto@gmail.com ..... thanks.
@vancla8
4 жыл бұрын
good evening I have a small joinery in Brazil and would like to be setting up your project. you could send the saw project. Thank you very much in advance . claudiorlara@icloud.com
@leonelsantizo55489 жыл бұрын
Hi, Congratulations!! good job, could you send me the plans?
@AlexPSNB
9 жыл бұрын
send me your e-mail address
@leonelsantizo5548
9 жыл бұрын
Just in case, if you forgot send the plans my email is jlsantizo.jls@gmail.com
@hawasnowhawa6248
9 жыл бұрын
Alexander Birnie can u send me plans my e-mail is snowhawaiiano@gmail.com
@visionerdesignandbuilders405
9 жыл бұрын
This is great!, Can u please send me plans as well my email is visioneridesign@gmail.com? Thank you.
@wohnungsfrei
7 жыл бұрын
schubert_ricardo@yahoo.de :) thanks
@marclauze58518 жыл бұрын
Hi, is good job! Is possible to send me plans. Thanks
@josecastillo-nl4yg8 жыл бұрын
exelente
@LJG78113 жыл бұрын
very nice......
@user-rr7xr8nb8xАй бұрын
Dear friend, you made this project with artistry and creative ability Can you provide me with this plan?
@AlexPSNB
Ай бұрын
Send me your email address...
@thejet411512 жыл бұрын
is there a parts list and instructions how to build one, if so would u be able to send via e-mail? thanks
@AlexPSNB6 жыл бұрын
It took about,a week on and off if I remember correctly,I have since built a different design and if you send your email I will send you some pictures of the Finnished saw.
@hansjakob8087
5 жыл бұрын
Alexander Birnie i would Readly like to have Theo Plans in it is possible please Write back and i will sende Mythos E-Mail But i Will Not send my E-Mail if im Not sure you Write back
@kennyruhl3613
5 жыл бұрын
i would love plans of this saw and pic plans of the new saw. This is awesome. kruhl@rti-inc.com
@leelawrence221
5 жыл бұрын
That would be great if you could send me pics of the new panel saw and any plans that might be available, my email address is lwlawrence123@gmail.com. Thanks
@keithmartin41198 жыл бұрын
can you send plan
@abdellaghezali993 жыл бұрын
Bonjour Monsieur, j'ai vu beaucoup de vidéos sur les scies verticales, pouvant me donner des idées sur mon projet d'en réaliser une dans mon atelier. Vôtre scie m'a enthousiasmé. Auriez-vous conservé les plans de vôtre réalisation, et serait-il possible de s'en procurer un exemplaire s'il vous plaît. Cordialement.
@AlexPSNB
3 жыл бұрын
Send me your email address
@abdellaghezali99
3 жыл бұрын
@@AlexPSNB Merci pour vôtre réponse. Voici mon mail: kancress@yahoo.fr Cordialement.
@johnschmidt77398 жыл бұрын
Alexander, Can you send me a copy of the plans also?
@kadikardigans448310 жыл бұрын
nice.....
@atruebiblicalchurch11 жыл бұрын
I just found your video and have ordered parts for the Shopnotes design but was interested in your design would you be able to share the alteration with me if i sent my email address?
@brewsterly29277 жыл бұрын
Very nicely done Alexander. You may be getting tired of this request, but I too would very much appreciate a copy of your plan. Have liked and subbed.
@AlexPSNB
7 жыл бұрын
Send me your email address
@shekharrvs
7 жыл бұрын
nice one ...could you send me the plans too @ rvsshekhar@gmail.com ..... saw your new yawl ...nicely made......
@rogerromero571211 жыл бұрын
goodnight as they call media you are using to the saw suguetar
@jessestrum12 жыл бұрын
why not make money and pay a specialist for a good one of the the shelf.try selling it and see the responce
@AlexPSNB10 жыл бұрын
send me your e-mail again as the one you wrote is not reconized
@nearzlake111 жыл бұрын
Or buy a real one for 200$ used like i did, easily used as a panel router as well.
@AnaPaula-vd2jz5 жыл бұрын
Legal uma maquena que geme
@tutohack54499 жыл бұрын
holi XD
@balysvitkauskas82728 жыл бұрын
Hi , Alexander , can u send this plan to my e-mail address?
Пікірлер: 259
I am also impressed with your build of the panel saw! I know this is an older video, now - and you mention in comments that you have a newer design. If you still have them, I would love to receive a copy of your DIY plans as well! [edit: email removed - plans received]
This has to be the nicest panel saw setup I've seen.
@AlexPSNB
3 жыл бұрын
Thank you
Thanks for the plans. Now I know at least one project I want to tackle this year. :)
Very nice panel saw!. Has everything I am looking to build in one.
best DIY vertical panel I have seen so far. Can I dare to ask for plans? That would be awesome. Thank you!
Best one I have seen! Great concept, looks easy to use!
Great job you did on that panel saw! I think I recognize the way that it attaches to the pipe as a ShopNotes version, I will have to look for plans. What modifications have you made to improve the original plan?
amazing !!!im from cancun mexico and we dont have all the parts to make it but im waching all the vertical panel saw videos to take the best way to make it
Thanks for the plans. I see you have a few tweaks on the original plans. If you were to make another, are there any other changes you would make? Do you find when making a ripcut/horizontal cut you have the top board trying to bind the blade? Is the horizontal rest for the board sacrificial on vertical cuts?
very clever consruction seems to be very handy and easy to use i prefer a vertical panel saw because its much safer than a table saw may you always keep your ten fingers best regards from germany
Great panel saw and great video. I wish I would have seen this years ago. Any Chance I could get the plans for this too???
Very Nice... The conduit with rollers makes it super nice.
Hi Alexandre, that´s an amazing job, congratulations!
Great video. I love it. Could you please send me the plans
This Panel Saw looks like the same plans that appeared in Woodsmith magazine 8/2014. It looks like you have different verticle guides, added rollers on the lower rail & your upper guide is pipe rather than 1-1/4 EMT. I ordered a set of plans but have not started my build yet. I plan to rotate my saw via a center point & locking pin (raise the blade & plunge in zero clearance slots) I hope it works) Good build, how long did it take you to complete?
yes it took about a week to get all the parts together and it was basically done using the Shop notes design with a couple of alterations to that ,glad you liked the saw
Great job. I assume that you could also make an adapter for a router? I have been thinking of this for awhile and think for the investment and for limited space, this would be a better option then a table saw. Do you charge for the plans? Thank you for your time
Congratualtions, Alexander. the best designs I've seen I would love to have a copy of the plans if possible, I thank you in advance.
@AlexPSNB
7 жыл бұрын
MARIA ANTONIA send me your e mail address
@carlosmario5991
7 жыл бұрын
Alexander Birnie Hi, alexander, my e mail address is carlosmario20142014@gmail.com
Great design. I see below you are willing to send plans. What type format are they in? I use Sketchup mostly, but let me know please. Again, great design and execution.
great job how is half sheet stop in there
This is the best budget sliding panel saw vid iv seen, there is a guy whos made a computerised one which is also fantastic but this saw will appeal and satisfy many woodworking enthusiasts. thank you so much for sharing.. if you would be willing to sell me a copy of the plans so that i may copy some of the ideas for my own id be very grateful, thank-you.
owesome design .... best of all. can you share the plan ?
Hi there the timbers behind the panel being cut are sacrificial and come time will need replacing these are still the same ones iam using on the saw from the first day i started using the saw and as yet havent replaced any.hope this helps
Hi Alex, Fantastic piece of equipment - I've been think of building something similar for a while now. Two questions: 1) When doing a length-ways cut (horizontally), what if the cut you need to make happens to be right over one of the horizontal supports, above the mid-fence? Won't you cut into it? 2) Similarly, when doing a cross-cut as you demonstrated, don't you cut into the fence?
At 8:04 what prevents you from cutting into the resting board (where your panel rests on the rack).
This is great design. Would it be possible to have the plans please? Also one silly question, what happen when you have to make a cut that ends directly on a back support stud?
@AlexPSNB
7 жыл бұрын
send me your e-mail
@AlexPSNB
7 жыл бұрын
the back supports are sacrificial
just what i was looking for, could i bother you for a set of plans. would be greatly appreciated. thank you very much.
Hi Alexander, that is one heel of a design, could I trouble you also for the plan? Thanks heaps
That's very well made. Is this based on the plans that Shop Notes had?
what happen at the end of an horizontal cut when all the weight of the upper piece of wood push against the sawblade? What prevent this?
Belo trabalho irmão, parabéns . Mostra como vc fez esse sistema de molas p subir e descer a máquina
@AlexPSNB
Жыл бұрын
Olá, as molas eram de um antigo conjunto de exercícios de peito que eu tinha por aí, mas você também pode usar alguns pedaços de elástico de borracha, isso faria o mesmo trabalho, usei isso na segunda serra que fiz e funcionou tão bem quanto as molas
@AlexPSNB
Жыл бұрын
Me mande seu e-mail que te mando algumas fotos da segunda serra que montei, que funcionou muito bem.
Hi. Nice job! I'm in the process of making one. I've the idea but have some thoughts on the bearings.. can you tell me how did you put them?
@AlexPSNB
6 жыл бұрын
send me your e-mail address
it is indeed a brilliant design, would love to see the plans if possible!
@AlexPSNB
8 жыл бұрын
send me your e-mail address Matt
@matteocoscia9245
8 жыл бұрын
mcoscia@yahoo.com, thanks so much!
@dustmedia1218
7 жыл бұрын
ME as well - gerrie@dustmedia.co.za
Hello Alexandre, are you able to email plans for this? I got really surprised about your design!!
Hi there, I am Italian and I really would like to know if you have a plan to build your vertical panel saw. Your job is great. Thank you.
@AlexPSNB Alex can you post a couple pics of the rollers and the central support you added . we are getting ready to bhuild one that will handle 5X5 sheets for the NortheastWoodworkers shop near albany ny.
Great job. trying to get one together
Desde Colombia gracias
Congrats. Great looking tool. I know I'm commenting a little late but is there a chance I can buy a set of plans? Thank you
@AlexPSNB
7 жыл бұрын
send me your e-mail address
Boa tarde Alexander Birnie, gostei do seu invento como faço para adquiri seu projeto.
Beautiful job! was hoping you could send me a link to the plans. or whatever is best thank you.
@AlexPSNB
7 жыл бұрын
send me your e-mail
Alguien me puede decir como hago para que el disco no me toque en las maderas de atas de la maquina? gracias
Do you still give out plans for this panel saw? Thanks, Jayson
Excelente trabajo....Podrías facilitarme los planos y medidas...Gracias
Hello any plans ?
Hello, is it possible to get plans for ths amazing design?
@AlexPSNB
Жыл бұрын
Send me your email address
Very Good Job I like It.....
Nice!
Alex, Very nice construction! Where can I find the shop notes design you used? Thanks for your video. You wife did a good job with the camera and sound also. Reuben
now thats clever. Bravo
Great design! Could you email me a copy of the plans? Thanks
Great video - can you send me the plans. Thanks
are you still sending the plans out
This is one of the best designs I've seen, are you able to email plans for this?
@AlexPSNB
8 жыл бұрын
+One Man Band Woodworking send me your e-mail address
@OneManBandWoodworks
8 жыл бұрын
+Alexander Birnie Thank you, message sent.
@saxofono2011
8 жыл бұрын
+Alexander Birnie , please can you send me plans for vertical panel saw? thank you
I love this idea. Are the plans still available.
@AlexPSNB
3 жыл бұрын
Sende your ail address
@mattweaver3277
3 жыл бұрын
@@AlexPSNB mweaver527@yahoo.com
Good day, i wonder if you will still have the plans for this machine... Could you please let me know if you do, i used to have my own woodworking company, and due to financial problems was forced to sell all my equipment... Im thinking of trying again. but dont really have the money to do so... PLEASE help me!!!
if you have planes on how you did this would love them
is it possible to send me plans? brilliant idea.
Very Nice! Please make the plans available!
@AlexPSNB
6 жыл бұрын
Send me ur E-Mail
i love the inventiveness of carpenters
@bobbg9041
6 жыл бұрын
Look out when they figure out they can also use metal cutting tools too.
Buenos días, disculpe usted podría facilitar los planos de esa sierra vertical.. Gracias
Thanks for sharing well done
Fantastic design, could I get a copy of the plans or purchase a copy?
@AlexPSNB
6 жыл бұрын
David Ward Send me your e-mail
@sherbetlemondesign
6 жыл бұрын
Many Thanks dave@versarack.co.uk
Excelente
Excellent craftsmanship! Are these plans still available?
@AlexPSNB
Жыл бұрын
Send me Ur email address please
@AlexPSNB
Жыл бұрын
Birniealexb@gmail.com
@remiixedreview4790
Жыл бұрын
Did you end up getting the plans?
ALSO, what's the maximum capacity? Can it cut 5x5ft Baltic birch sheets?
@truebluekit
9 жыл бұрын
He did say it will cut a full size 4'x8' sheet.
Opps, hit send to quickly. What sort of accuracy are you getting?
@AlexPSNB
3 жыл бұрын
The saw is very accurate for sawing panels to size,send me your email address will send them onto you
@bpez3106
3 жыл бұрын
@@AlexPSNB Thank you for your quick reply. Email prince.barnwood@gmail.com. Stay safe
yes it was i just made a few changes to the shop notes design
Hey brother great job done here, I would gladly purchase one if you would be willing to sell one except the saw I have two. Which is why this project would be good to use one on.
Super!
Thank you
cracking saw, just what im looking to make, can you send me the plans
@AlexPSNB
8 жыл бұрын
Send me your address
Dear Sir, I am gathering all the material to build a similar saw, thank you for your video and details about it. Can you please tell me the kind of spring you used to compensated the weight of the tool ? They look like garage door springs but the wire diameter of these is always too big and the springs are too stiff. Thank you for your help. Best Regards, John
@AlexPSNB
6 жыл бұрын
John Martin it was the type that is used on the old type of chest expanders. My latest saw that I built uses the rubber bungee cord and it works just as well
@Marcellus74
6 жыл бұрын
Thank you very much for your answer, I just found a used "brand new" arm stretcher with 3 springs 2km from my home for 5€. Thank you for the tip ! Building of the saw can carry on...
@AlexPSNB
6 жыл бұрын
John Martin okay that's good you have managed to get springs..I wish you success with your build.
@erichesketh6028
6 жыл бұрын
Alexander Birnie . Can you please supply copy of plans for your diy panel saw ? To elphesketh@googlemail.com
Hello Mr. Alexander, my name is Milton, I´m from Brazil. So, I would like to buy the plans of construction of this vertical panel saw. It´s possible?
Alexander sure looks like everyone is wanting the plans for your saw how about it?
@AlexPSNB
5 жыл бұрын
Send me your e-mail address bud
Super top
رهيب عاشت ايدك
Hello, I repeat my congratulations ..... that good work, the best I've seen, and I wrote a year ago and now I would like to know if you can sell those plans, excuse the insistence.
@AlexPSNB
6 жыл бұрын
Mario,send me youre-mail address and i will send the plans on to you
@Pucallpillo
6 жыл бұрын
Alexander Birnie ..... my mail: mueblescovalto@hotmail.com and mueblescovalto@gmail.com ..... thanks.
@vancla8
4 жыл бұрын
good evening I have a small joinery in Brazil and would like to be setting up your project. you could send the saw project. Thank you very much in advance . claudiorlara@icloud.com
Hi, Congratulations!! good job, could you send me the plans?
@AlexPSNB
9 жыл бұрын
send me your e-mail address
@leonelsantizo5548
9 жыл бұрын
Just in case, if you forgot send the plans my email is jlsantizo.jls@gmail.com
@hawasnowhawa6248
9 жыл бұрын
Alexander Birnie can u send me plans my e-mail is snowhawaiiano@gmail.com
@visionerdesignandbuilders405
9 жыл бұрын
This is great!, Can u please send me plans as well my email is visioneridesign@gmail.com? Thank you.
@wohnungsfrei
7 жыл бұрын
schubert_ricardo@yahoo.de :) thanks
Hi, is good job! Is possible to send me plans. Thanks
exelente
very nice......
Dear friend, you made this project with artistry and creative ability Can you provide me with this plan?
@AlexPSNB
Ай бұрын
Send me your email address...
is there a parts list and instructions how to build one, if so would u be able to send via e-mail? thanks
It took about,a week on and off if I remember correctly,I have since built a different design and if you send your email I will send you some pictures of the Finnished saw.
@hansjakob8087
5 жыл бұрын
Alexander Birnie i would Readly like to have Theo Plans in it is possible please Write back and i will sende Mythos E-Mail But i Will Not send my E-Mail if im Not sure you Write back
@kennyruhl3613
5 жыл бұрын
i would love plans of this saw and pic plans of the new saw. This is awesome. kruhl@rti-inc.com
@leelawrence221
5 жыл бұрын
That would be great if you could send me pics of the new panel saw and any plans that might be available, my email address is lwlawrence123@gmail.com. Thanks
can you send plan
Bonjour Monsieur, j'ai vu beaucoup de vidéos sur les scies verticales, pouvant me donner des idées sur mon projet d'en réaliser une dans mon atelier. Vôtre scie m'a enthousiasmé. Auriez-vous conservé les plans de vôtre réalisation, et serait-il possible de s'en procurer un exemplaire s'il vous plaît. Cordialement.
@AlexPSNB
3 жыл бұрын
Send me your email address
@abdellaghezali99
3 жыл бұрын
@@AlexPSNB Merci pour vôtre réponse. Voici mon mail: kancress@yahoo.fr Cordialement.
Alexander, Can you send me a copy of the plans also?
nice.....
I just found your video and have ordered parts for the Shopnotes design but was interested in your design would you be able to share the alteration with me if i sent my email address?
Very nicely done Alexander. You may be getting tired of this request, but I too would very much appreciate a copy of your plan. Have liked and subbed.
@AlexPSNB
7 жыл бұрын
Send me your email address
@shekharrvs
7 жыл бұрын
nice one ...could you send me the plans too @ rvsshekhar@gmail.com ..... saw your new yawl ...nicely made......
goodnight as they call media you are using to the saw suguetar
why not make money and pay a specialist for a good one of the the shelf.try selling it and see the responce
send me your e-mail again as the one you wrote is not reconized
Or buy a real one for 200$ used like i did, easily used as a panel router as well.
Legal uma maquena que geme
holi XD
Hi , Alexander , can u send this plan to my e-mail address?
send me your e-mail
Send me ur e-mail address