THANK GOD SOMEONE WHO STILL HAS A V8 IN THEIR 2ND GEN 👏👏👏👏👏👏👏

@Tiltymilk

3 жыл бұрын

I have a v10 in mine, rare to see gasser 2nd gens

@Paranoid-loser

3 жыл бұрын

@@Tiltymilk yea those are cool don't see many V10s

@metalfire4257

3 жыл бұрын

@@Tiltymilk My dads gf has a 1994 Dodge Ram single cab 3500 with a v10 the thing is a beast and rare

@leroywingo8599

2 жыл бұрын

Old comment ik but last year I got a 99 2500 Manual v8 with 84k original miles. It's great... besides the paint

@Paranoid-loser

2 жыл бұрын

@@leroywingo8599 awesome

I remember this truck when you bought it in trade school, terrorizing Middletown township after signing out of dinner

@TurbaTom

4 жыл бұрын

Terrorize?? Me?? No way! Haha, though I may have been apart to some tray sliding in an abandoned chi Chi's parking lot!

Veronica is the reason why i subbed

I'm gonna try to fit these headers on a 1974 D100 chassis, should be a fun project coming up

Purple 99 5.2 5spd here!

I'm only a couple mins into the video but so far thank you for the rev limiter bounce sir!!

I wish my 99 sport was a manual. Nice looking.

a 5 speed Sport does exist.... holy crap

I just bought my first truck a mint 2001 ram 1500 I love it

Bought the same truck last fall, same color. Love it. She gets more of my time than the wife lol. Just put stainless headers on my self. Wasn’t as fortunate as you. I had two broken bolts before I started. Ended up with 3. Love the video. Still got Veronica?

I’m really glad that you made this video because I have a 98 318 5 speed and have looked at these long tubes and Y pipe for awhile now.

@rickyscheiderer6442

4 жыл бұрын

Also how do they clear the slave cylinder?

@TurbaTom

4 жыл бұрын

Once you jack the engine around they slide in fine, it's a tight fit for sure. Also I had to cut a section of the y pipe to shorten the one side to get everything engaged fully. Starter definitely has to be out to install the driver side

@rickyscheiderer6442

4 жыл бұрын

Thanks for the reply! I was wondering how they cleared the front driveshaft as well but you covered that for me. Looks like my daily beater is getting a set of long tubes. Thanks again!!

@TurbaTom

4 жыл бұрын

Nice!

Leslie RS3L is your train horn. Leslie and Nathan Airchime are the real ones. Hate those cheap train horn kits. I also drive a 01 Ram 1500 with 5.9 360. Love these second gen Dodges! Got some shorty headers on mine and love them.

I have a 98 ram 1500 4x4 and I’m looking for a 5.7 hemi and trans to go in it, hope it won’t be too hard keeping the 4x4 working. Truck has emotional value so I’d really like to do the engine and a complete custom interior hope it turns out to be a beast I want a blower on the 5.7 when I get it all ready these trucks are mean I couldn’t think of a better truck to build

@LuisHernandez-gi2eq

Жыл бұрын

did you ever end up puttin in the hemi tho?!?

Also i had a 2000 offroad and wanted to let you know if your into that kinda thing doesnt take much to run 37s possibly 38s for fairly cheap.... with a leveling kit and 3 in body you can fit 37s possibly even 38s just alittle fyi if your into that kind of stuff and lookin to find out how big you can fit. Also you can fit just with a leveling kit no body lift you can run 35s

my mom bought one so she could make it stupid loud recently and we’ll she definitely made that 5.9L scream 😂😂😂 (ps my dad drives a 2010 4.7L and i drive a 2002 rsx type s)

I have a white 99 5.9 Durango with over 208,788 miles on it fixing to put headers and true duals dumped out in front of back tires

Does the egr valve have somewhere to make up on the headers?

I have a 96 lwb w318 with 4.000 scat crank and a .40 over bore for 392ci. And a stage 3 shift kit for the 46re and I regeared the rear to 3.92 lsd with disc brake conversion and I have hellcat wheels and tires 20/55/335 rear and 315 front and ram 3500 suspension front and rear with fox coil overs front and rear with 2" 4" suspension drop been looking for a supercharger kit and decent long tube headers equal length and I'm going with 3" pipe with flowtech hp-2 mufflers and I have msd ignition with e3 plugs and msd ignition box

What about the Egr? Does it still link up to the exhaust?

Nothing is as loud as open stock exhaust manifolds with the shifter boot off. That will blow your ear drums out.

@TurbaTom

4 жыл бұрын

And fill the cab with exhaust! Trust me I know!

What’s some good longtubes for 98 25004x4? 5.9L

where is the link for the DNA headers

What I wonder is, how much do those cheap headers stick out to cause the tight fit? I just bought Hooker's for my 5.2.

I got a dodge ram 1500 5.9 engine. I love it but it's driving me crazy at times trying to keep up with it

Random question but what’s your tire size?

How much do you want for the train horns?

Planning on 5.7 swapping my ram from the 318 and putting in a dash from the 3rd/4th gen most likely same generation I pull the engine from man I just wish these things didn’t break every 1000 miles. Planning on doing a massssive over haul

@mikeyjoseph8714

3 жыл бұрын

I prefer the 318 over the Hemi

@marcusholtzheimer9316

2 жыл бұрын

I bought my 98 5.9 about 8-9 months ago new fluids and like a month ago replaced the radiator. Nothing else needed yet!

@Grannybang35

2 жыл бұрын

So your gonna get rid of an absolutely fine engine and bust your ass just building a fake 3rd gen??

If you plan on keeping that truck forever you better take care of all that rust Before that truck disappears lol

I even know not to get pace header exhaust. Your new headers are gonna rust cuz they used a carbon steel flange. Don't be surprised they crack either.

what company did you use. I cant find any long tubes. Nobody has anything for the ram. I have 97 with a 5.2. Are they the pacesetter lpng tibe? Chinese knock off? Summit racing? Any body knows if i can get the summit racing headers for the small block LA to fit into the truck ? Any modification?

What is intake setup?

Link for the headers?

Did you have a gasket leak on your old headers? I’ve got that ticking sound. I think that’s what I’ve got with my 00 1500. I’m debating on just getting a new gasket for getting headers while I’m down there. Thanks

@TurbaTom

3 жыл бұрын

The old headers were shot. But when a gasket would leak I'd get the ticking sound. Eventually I had to double up the gaskets to get the leaks to stay sealed

@seanpennington6912

3 жыл бұрын

@@TurbaTom ok thanks

I bought those exact same headers and had all the same problems. Very tight and wrong bolts

Which fit better. Pacesetter or DNA? I have jba shorties currently but they have small primaries

@TurbaTom

2 жыл бұрын

Same, I believe the DNA are exact duplicate. But they are true stainless

@Allan.m432

2 жыл бұрын

@@TurbaTom thanks for the reply. My shorties slid right in but I know long tubes are better. On my 05 power wagon I had to replace the sagging motor mounts to make my arh headers fit. I wonder if that would have helped the fit.

China stuff is 301L stainless. That's the lowest grade stainless on the market. Carbon steel from China is 184 grade. I was a steel worker!

The second. Video sounds alot better. Needs a good cam

99 318 w/ automatic

I'm in PA too! I have a 96. I would like to throw a proposal your way. Let me know if interested.

02 is half 2nd gen. N half 3rd generation

Sounds like a leak in the first time around

That's a man. A pissed off man that ain't no she. He got some nuts.

Not 100% but kinda sounded like a rod knock a little more than an exhaust leak

@TurbaTom

4 жыл бұрын

I don't thinks so, but if it is it'll be 5.9 time

Should put a cam in er and do some head work to get some real benefits out of those headers.

Would it cause a problem to just run 3 inch tubes all the way to the back?

@jasonpillars9747

3 жыл бұрын

Putting to big of pipes could cause less torque and compression

How did you like your "Mini max" programmer for your 6.7

@jmanyoo3305

4 жыл бұрын

Chris Edge I like mine. If your gonna run one though put head studs in. Just a heads up

@TurbaTom

4 жыл бұрын

I liked it, but there are better options out there now. I had a mini because that was the only option back then, also not many people support mcc custom tuning any more

@CJE2007.5

4 жыл бұрын

@@jmanyoo3305 i was wondering about that. I plan to do head studs soon. I really didn't want it just to make more power mainly just to get rid of the trash off the engine so it wasn't eating it's own shit and not to have the $ light on all the time. Thanks for the advice.

@CJE2007.5

4 жыл бұрын

@@TurbaTom living here in Idaho we don't have any place anywhere local to go to get custom tuning. I know it can be done remotely but as you said finding anyone to do it on a hwy rig is hard anymore. The mini max had great reviews for plug n play and would work on a deleted rig. Thanks for getting back to me.

Is it just me or does that thing sound like it's knocking

@TurbaTom

4 жыл бұрын

Nope, I've been trying kill it and it won't die!

You look like Ryan Dunn

@mertonallowicious

3 ай бұрын

This comment aged… disturbingly well? Rip to both 😢

What's gas milage on that bad boy, not a joke I'm actually wondering

@TurbaTom

3 жыл бұрын

Not much lol

You said it was an offroad package? With a 5.2 magnum? Offroads didnt come with the 5.2 only 5.9l magnum. If its a offroad it will 4.10s trussed front dana 44 bout a 2 inch lift etc hooks.... decal on tailgate different rims shocks and hooks..... and maybe couple little odds and ends.... by looking at it from different things im seeing definitely looks like an offroad or maybe a clone not hard to do unfortunately theres alot of people out there that make these trucks into clones so people think they have one and dont.... are you sure your truck isnt a 5.9 360 magnum not 5.2 318 magnum?

Are you interested in selling those train horns ?

@TurbaTom

4 жыл бұрын

I doubt it, they probably need rebuilt any how

Fix the train horns and put them on the new truck 😁

Sounds like shi* lol

waist of time and money, I was told Never to install headers on my 5.2, he said they Will come loose and hes fixed 100s of inferior aftermarket parts. Less is More Kiss= keep it simple Stupid...