Ventrac Tractors: The Complete Quick Start Guide
Автокөліктер мен көлік құралдары
www.ventrac.com/
How to operate the Ventrac 4520 tractor. In this basic overview, Aaron highlights basic tractor features and controls.
This overview provides Ventrac operators basic refresher information on how to properly and safely operate the Ventrac 4520 series tractor. Although this video will cover a wide range of features, safety, maintenance, and operational procedures, always read and fully understand the operator's manual before attempting to operate your Ventrac equipment. The manual covers items and procedures specific to your equipment, adjustment specifications, maintenance, and more.
Products featured in this video:
Ventrac 4520:
www.ventrac.com/products/trac...
Power Rake:
www.ventrac.com/products/atta...
For more information, visit www.ventrac.com/
Find a dealer near you! www.ventrac.com/dealers
Get a FREE catalog! www.ventrac.com/contact/catalog
Subscribe here! / @ventrac
Connect with Us!
Facebook - / ventrac
Instagram - @ventrac_tractors
Twitter - @ventrac
00:00 Introduction
02:30 Connecting Attachments
10:05 Operator Controls
25:24 Wheels
34:05 Weight Transfer
36:09 Basic Maintenance
46:42 3-Point Hitch
49:38 Extras
Пікірлер: 62
You picked the right guy to do this video.
Great video. You save me two hours watching Huberman talk about this topic lol.😂
Unrivaled machine. This video is great.
@ventrac
3 ай бұрын
Thanks Danny. People put hard-earned money towards purchasing our tractors. We want to make sure they get the most out of them. ✊
Great video, and great refresher video. Would like to see more of these types from ya'll. Thank you!!
@ventrac
Жыл бұрын
Thanks for your input! We will make sure to keep these top of mind. We also have a Simple Start series you may find helpful, it's a quick start guide for our various attachments! kzread.info/head/PLU6reQZhgG6_h7IEIoKFtSploC-S3VfPR
This was a very, very useful video. Very professional job. Thanks! A challenge in attaching implements is you can’t see things well from the seat. So I stand off to the side and connect. I push wheeled attachments into the connect position. The Ventrac manuals are the best in the industry… although I’d like to see more checklists. Cheers. :)
@ryanroberts7771
Жыл бұрын
I just fold up the arm rest and look down the left side to line up. Make very small left and right adjustments while moving forward. It takes finesse. I just went out one day for a couple of hours just practicing hookup and its pretty easy now. Also make sure mower decks are on the highest setting for connecting
@ventrac
9 ай бұрын
Thanks for the feedback, we appreciate it! We are always looking for ways to improve the ease of use for our equipment.
While I don’t have a use for a Ventrac tractor it’s so awesome to lean about them.
@ericfazekas1057
16 күн бұрын
said no woman ever. 🤣 I 100% agree, just looks like fun.
@FerroequinologistofColorado
16 күн бұрын
@@ericfazekas1057 indeed. Who wouldn’t want a 4 wheel drive Swiss Army knife.
Very helpful video. Thank you😀
@ventrac
Жыл бұрын
Glad it was helpful!
Great vid arron at DGM DEVON ENGLAND my boss sells ventrac , watching you’re vids got me a job there 3 year ago loving these machines and now get to drive and pdi them from the crate , so thanks for supplying such a cool looking machine 👌😉
@ventrac
Жыл бұрын
Awesome to hear! Thanks for sharing your story with us.
Thanks for this video. Can you please make a video on all the attachments as they come out? I know we have to read the manual but many of us are visual learners and you showing things is so much easier.
Very solid machine
I live in a Ventrac desert. It’s at least 2 hours to my nearest dealer. Hopefully one day Toro dealers will sell Ventracs.
Great useful video. It helped me to watch it even tho I have had a 4500Z for a few years. I do wish you had covered the battery, especially is there a place to use jumper cables if needed. Thank you.
@ventrac
Жыл бұрын
Great suggestion! I'll be sure to mention that to Aaron for future videos!
Love hearing about these machines! lol Its just that i dont know I want to spend that much on a tractor if I can easily buy 3-4 zero turns for some employees. I do love them though and am thinking about getting one especially for winter so I can do some more business then.
@ventrac
Жыл бұрын
We have a lot of landscape contractors and snow contractors who love the equipment!
Great presentation. Is there anything similar for the 3100 tractor? Please let me know. Thanks
Why don’t you let owners buy the spare parts from you. My dealer is about an hour away and usually doesn’t carry the part. They substituted a John Deere oil filter for yours. Dealing with them is inconvenient please consider changing your practice.
@StoneGoat
Жыл бұрын
Agreed. Have a dealer an hour away......carries absolutely nothing in stock. I travel a state away (8hrs) to a way better dealer (idaho) they are Johnny on the spot with service and supplies.
@ryanroberts7771
Жыл бұрын
@@StoneGoat Amen! I would like to see a ventrac amazon store for maintenance parts.
@ventrac
Жыл бұрын
Thanks for the input. We'll send a reminder to our parts team. This is definitely an area they are working on though as it's obvious we need to provide an option for people to have instant parts access no matter where or when they need it.
@user-eb7kz2ki6w
11 ай бұрын
@@ventrachas this issue been resolved
@markwang1399
5 ай бұрын
@@user-eb7kz2ki6wof course not.
Does the 4520 offer the wheel extensions? I have a 4500z with the factory installed extensions and feel the machine looks better and have never felt unsafe
it was the simplest thing I’ve ever operated. (4500 diesel) sadly it had a bad brake in from the operator before me and never ran right a few months before I got to run it 😢
Any plans on backhoe attachment?
It looks like all the stress from the operation of the attachment is being transferred through the 2 small pins. CGI turf broke one of his pins on a 4520 while running the power rake. How common is this problem? And do you know what the stresses are on those pins. (i.e. Do you use Finite Element models when designing attachments ex. ANSYS?)
@ventrac
Жыл бұрын
Yes, we do employ FEA in the design process. We have seen a few of those pins break from time to time, but so few that it's really not an issue. There are not very many use cases where significant stress is being transferred through those pins. Power Raking in reverse with perfectly level hitch arms would be one of those cases and It's still quite rare to hear about that happening. Pete is one of the best Ventrac operators in the country so I know he wasn't abusing it, but this is also the first I've ever heard it's happened to him.....and he has TONS of hours on Ventrac. Most people who run Ventrac have never had a pin break. I've personally never done it and I've been using the machines pretty hard for over 10 years. I wouldn't worry about it! -Aaron
Question love you’re kit but upgrade you’re fixings as they seem to break often , the clip you install to the product are weak an I’m always going through our surplus to find a replacement xx
@ventrac
9 ай бұрын
We are sorry to hear that you are having problems. So that we can best understand the issue can you elaborate on what fixings you are referring too?
Nice! One thing I'd add is handles on both of the fenders. When you're on a slope, the handles would really help to hold yourself upright. Many tractors have them and won't come close to the 20-30 degree slope that these will, so handles are a must! Also do you have any hints on getting the mud out of those tires? They are very difficult to clean and if you just leave the mud to dry, you'll have mud turds everywhere the next time you use the machine. Thanks!
@ventrac
Жыл бұрын
Hey Terry, great question. While it may not be ideal, we will typically run the tractor on gravel or pavement after the job is complete and it will fly off. While its not the best answer, your tires will be plenty clean when you start the next job. Thanks for watching!
Do you have an auger attachment for this machine ? Thank you
@ventrac
Жыл бұрын
Not currently. An auger is a common suggestion. Thanks for your input.
Does Ventrac have any plans to incorporate the new Kawasaki EVO 34 hp engine in the P model?
@ventrac
Жыл бұрын
We will send this engine option over to R&D! We appreciate the suggestion.
I use a 4500 in snow do you have video on that ?
@ventrac
9 ай бұрын
We sure do! What kind of content are you looking for? There are lots of videos that involve the 4500 and snow removal if you scroll down far enough on our channel. Let me know if there is something specific I can help you find.
I would like to see a ventrac option for a carryall or at least a chainsaw holder. I don't know if my second request is legal or not, but I would like a much larger diesel option governed down to the regulatory requirements with the ability to remove said governor.
@ventrac
Жыл бұрын
We will forward this to R&D! ✊
@arlisspropertyservicesllc5943
Жыл бұрын
Artillian makes a ROPS mount, it has several options for attachments, such as chainsaw holder and basket.
@cwolf8841
Жыл бұрын
@@arlisspropertyservicesllc5943 Yep I installed on mine. Very very useful. BoltOnHooks makes aluminum ROPS mounting blocks. I redid everything on the ROPS with them. Which also solved mounting the slow moving vehicle triangle.
Have you looked at opening a dealer in South West Michigan? I want one but there isn’t any local dealers.
@ventrac
11 ай бұрын
Sorry to hear about this. We are always looking to expand our dealer coverage. Give us a call at (33) 683-0075 and ask for Isaac Ramseyer and I will see how I can help you.
@everydaydad3054
11 ай бұрын
@@ventrac is there another number with the (33) ?
@ventrac
11 ай бұрын
@@everydaydad3054 So sorry about that: Yes! (330) 683-0075
@everydaydad3054
11 ай бұрын
I have a toro dealership next to me that is looking to expand into compact tractors. I told them about ventrac and that toro owns them. That might be a good opportunity to get into this areas market. Would Isaac be someone to talk to about getting a ventrac dealer in my area?
@ventrac
11 ай бұрын
@@everydaydad3054 Unfortunately no. I have passed your suggestion on. Thanks for providing feedback. That helps us continue to support our customers in the best ways we can.
Wait a minute! Did you say “N”? When did THAT happen? 😳 Please give more info on this engine option.
@davidgalloway-fd6sb
11 ай бұрын
Will someone tell me how much is the. Ventrac.
For this crazy money I will buy a Bobcat or a Toyota Tundra with a vacuum cleaner and I will drive it in the backyard without shame.😂
Where were the shots of 21:26 filmed?
@ventrac
11 ай бұрын
At the Horseshoe