Just a little tip about using liquid masking fluid from a watercolor artist: Dip your brush in liquid soap coating the the bristles well, and then dipping it into the liquid mask. You will save your brushes from being destroyed. watercolor artists use soap all the time with liquid mask. Hope this helps you.

Use silicone brushes to apply. It peels right off.

I use silly putty for less detail areas. I wanted to share because your video has helped me very much. Thank you for taking time to make it. ❤

I put it on thick and leave it for weeks without any problems but nothing is one size-fits-all in this hobby. Thanks for the video

@greedy3d480

Жыл бұрын

Remember leaving it on for two days across the weekend on a face and it took me ages to get it off but you're right one size does not fit all 👍👍😁

thanks :)

Fear gone! I bought a pair of glasses, they didn’t have red rimmed ones, so bought a gold chrome set. Thinking that I could paint them myself with a steady hand. I then discovered, (what will they think of next), liquid mask. I then got too scared to try it. I have found you (😊)….thank you! Testing on an old pair of sunglasses, awaiting the ‘clear’ signal to go ahead and paint the rims!

@greedy3d480

10 ай бұрын

Ah glad it helped.. Good luck 👍👍👍😁

I made the mistake of using Microscale Micro Mask on Tamiya acrylic paint and the mask pulled the paint off. I sent the blue bottle to the landfill.

I found that massage in a tiny amount of dishwashing soap (like Dawn) to the brush bristles, when it’s time to clean up, the masking liquid will wash right out of the brush.

@greedy3d480

8 ай бұрын

Thank you for the tip 👍👍👍

Great video, I just picked up some, looking forward to trying it out, but one question, what do you use to clean the brushes with? Thanks!

@greedy3d480

11 ай бұрын

Plain old water 👍👍 thank you for the comment 😁

Great video! Do you recommend sealing the model before applying the mask?

@greedy3d480

Жыл бұрын

yes, i did this to protect the work id done on sking tones

White/Blue-Tag, easy to mold and easy to remove.

@greedy3d480

Жыл бұрын

Yeah I've used this too, the question came up in one of the live streams that I did and thought I would answer it in a video but there's a quite a few ways you can mask off paint 👍

Hello, very nice video, does it work in wood too?

@greedy3d480

Ай бұрын

Yes it does

Hello , small question ... ( noob in painting ) , I print in dual ( or more ) colors with my idex ... but the final print still needs some painting ( usually the eyes , the lips , and medium to small areas ...) Painting without primer and the paint will penetrates the PLA by capillarity ... But then how can I paint ( primer & color ) those areas , and keeping the sides as it it with the filament color , so I cannot put a primer everywhere before the masking , etc

@greedy3d480

9 ай бұрын

Mask then prime maybe?

What’s it like when using over existing painted area’s. Does it also pull off the paint under it?

@greedy3d480

6 ай бұрын

No it doesn't at all...

Whats the best tool to apply this with? I know you have to soap up the brush prior to using it or it ruins the brush.. ive seen others use a silicon like brush.. Just wondering if theres any great ideas out there to get the best lines and coverage.

@greedy3d480

5 ай бұрын

Little silicon brush or a brush you don't mind throwing away... I use an old brush... Works fine

do you seal it with clear coat before using it?

@greedy3d480

10 ай бұрын

Yeah I do - not completely necessary though , ive used it with no issues not sealing

I have a love/hate relationship with Vallejo liquid mask

@greedy3d480

Жыл бұрын

Yeah I get that 🤣👍

does it expires? because mine is more liquid than before also after shacking it and it seems it lost its properties as well...

@greedy3d480

6 ай бұрын

im sure evrything has an expiry date

Looked at the descriptions of various liquid masks but haven’t yet seen it answered; will this VALLEJO product mask against enamels??

@greedy3d480

7 ай бұрын

Not 100% sure on that.... Don't see why not though .. Suggest you do a test..let me know 👍

mine get dry almos at the moment it touches de brsuh :(

@greedy3d480

Жыл бұрын

I've not had this problem at all..???

how can i clean the brushes, with water?

@greedy3d480

7 ай бұрын

Warm soapy brushed as soon as you've finished

Hi I got a question I'm going to order a masking liquid I like to know which kind I'm asking liquid is works better with Mr color paint

@greedy3d480

3 ай бұрын

I just use vallejo... Never had a prob

@gordongriffith9047

3 ай бұрын

@@greedy3d480 so I can use it mr color paint with it

@gordongriffith9047

3 ай бұрын

@@greedy3d480 so it works to with Mr color paint

Can I use it on already paj Ted area's?

@glennbarton3938

5 ай бұрын

Painted , not paj Ted 😂

@greedy3d480

5 ай бұрын

@@glennbarton3938 absolutely you can....

@glennbarton3938

5 ай бұрын

Thanks

where did you get the bust file from ?

@greedy3d480

Ай бұрын

It's a sanix model