Made that look like an easy job. Top work. Planning on changing mine on my fiat punto grande 06 (failed on the MOT because of the corroded subframe). After you took the tyres off what were the steps you took to get the subframe out?

@TwoSpanners

2 жыл бұрын

Just make sure any lines or looms are unclipped, support, the subframe, unbolt it from body, we dropped the lower arms with it so have to detach them from hubs. It's not too difficult tbf

great work carnt wait to see the bodywork side of things

@TwoSpanners

2 жыл бұрын

Thanks 👍

Bloody brilliant 👍🏻

@TwoSpanners

2 жыл бұрын

thank you we are trying to get it right lol.

Great video , guys. What alternatives do you hav if a new subframe isnt available? The only ones i can find are from car breakers , so are a similar age : to be re assured i need the front subframe replacing on one of two Toyota T Sport models , 51 plate.

@TwoSpanners

2 жыл бұрын

find one that that dosnt have a rotten hole in the sub frame and your be fine, as thats the only reason i change the sub frame, so go look at the sub frame you want to buy and check it over :) i hope this helps

Spray the hole subframe with white lithium grease to protect it my grans subframe on her 2010 SE 1.2 is really rusty and the control arms inner and outer tie rods so the hole lot needs to be replaced.

@TwoSpanners

2 жыл бұрын

There always good fun :), just want to get to work on the bodywork tbh but we got so much going on atm. We havnt had time to touch our own cars

As always you made that look wayyy to easy but will be good to have this as a reference when I do mine also u may have to put spacers on the bolts for that brace as the exhaust tends to knock it when driving I have that exact same brace and had to do space it as it kept knocking the exhaust lol top work as always boys 👍🏻👍🏻

@TwoSpanners

2 жыл бұрын

mate honestly its super easy tbh you only need like 6 tools if that, your have it done in less then 3 hours and be back on the road

My garage have advised me my subframe is corroded and needs replacing along with the suspension arms, I’ve sourced the part but I can’t for the life of me find out what bolts, and how many I need? Any idea?

@TwoSpanners

2 жыл бұрын

If you look at your new subframe you’re see where the mounting holes are mate your need a E12 socket I think it was and a 16-17-18mm spanners and sockets ect if you was close I’d give you a hand mate

@tconners1758

2 жыл бұрын

@@TwoSpanners Appreciate the reply man. I’m in Kent? Anywhere close? 😂 Im looking everywhere for the bolts. Are they ones you can just buy from B&Q lol Or do they have to special Vauxhall ones? Any help would be appreciated man. Thanks.

@TwoSpanners

2 жыл бұрын

@@tconners1758 I’m Northampton mate so about 1hr 30mins away I think mate so your not to far I don’t think you shouldn’t need bolts mate it’s tools you need lol

@TwoSpanners

2 жыл бұрын

@@tconners1758 actually your 2hr and 16pound away lol my bad

@tconners1758

2 жыл бұрын

@@TwoSpanners Haha no worries man, I don’t think the car would make it that far before the subframe gives out, it rotted! Lol. Dealer never told me! I’ve had a lock garage look at it and they said they can’t use the existing bolts as they’re too rusty and rotted so I need to source both the subframe and the bolts. It’s a nightmare! 😂

My folks car is a corsa 2012 plate and has just failed it’s MOT due to a cracked and corroded subframe and broken spring and she hardly drives the car and no advisory’s from last years MOT which it sailed through, they’ve been quoted £678 including the VAT to replace the parts I’ve just mentioned so I think they’re gonna get a 2nd opinion! I personally blame the state of the roads and lack of money spent maintaining them by councils up and down the UK for this current predicament of peoples cars having issues like this when an MOT is due, it’s awful!

@TwoSpanners

Жыл бұрын

That’s a stupid price non genuine subframe is around £150 pound and spring is about £50 I’d say around 100-150pound labour max

@beefchops1400

Жыл бұрын

@@TwoSpanners you’re forgetting the VAT

What size Poly bushes did you use?

@TwoSpanners

2 жыл бұрын

They come as a kit mate, I didn’t measure them, you can just Google corsa vxr poly bushes, sorry I couldn’t be more helpful

@TwoSpanners

2 жыл бұрын

Powerflex is the brand, was a handling kit, looks like some are purple series and some black series

Where did you get the subframe from?

@TwoSpanners

Жыл бұрын

Online mate you can get them from eBay

@OMackenziee

Жыл бұрын

@@TwoSpanners fast response cheers, you got a link can't find on google

@OMackenziee

Жыл бұрын

@@TwoSpanners cheers will look. Seen imaxle have loads 👍 Reckon this could be done on a driveway?

@TwoSpanners

Жыл бұрын

@@OMackenziee you could defo try mate

Whats the price of a new subframe?

@TwoSpanners

2 жыл бұрын

You can get them online for about £140-£200 and it’s only a 2 hour job can be done on your drive if your looking todo it your self.