6:14 Failure in the voice module of synth model : Oxhorn

@MonkeysxMoo

8 жыл бұрын

We'll have to set a Courser after him

@T-Jex

8 жыл бұрын

DO YOU HAVE A GOD DAMN GEIGER COUNTER!!

@taylorlynn2522

8 жыл бұрын

+T Jex. sry mine is in the shop!

@MazzerFXDesigns

8 жыл бұрын

His real name is O1-29

@T-Jex

8 жыл бұрын

Taylor Killzone Oxhorn unit's secret identity has been compromised, we need emergency relocation

the should've put in pre made rooms, or at least a premade over seer room(like with the premade wooden house)

@mythicplays7150

4 жыл бұрын

But that's not the Bethesda way

@irregular_banana

10 ай бұрын

That's not the Bethesda way

Me: Time to build a vault! *five minutes later* Me: This is impossible! TO THE INTERNET!

@phrog2013

7 жыл бұрын

Lol so relatable I just got the dlc and I had no idea what to do so I just relied on oxhorn

@viperbuzzard01h84

6 жыл бұрын

Fervidor right

@viperbuzzard01h84

6 жыл бұрын

Butter Penguin my first vault before I restart the campaign my first vault was crap

@yt.kaiserkiwi

6 жыл бұрын

Same! Absolutely the same :D

@waltersimeon387

6 жыл бұрын

Oxhorn is the Fallout master.

We built a room inside your room so you have space for your space.

The string lights from wasteland workshop dominate all other lights.

@rileyhasguns597

7 жыл бұрын

Letsplaylunchgaming Saints heck yeah!

@gloomzy10278

2 жыл бұрын

There are the best i have them all over my home plate base 👍

@the25thprime

Жыл бұрын

They take up so much storage though for some reason 😮‍💨

You just saved my from throwing my computer out a window. I couldn't for the life of me figure out how to put another door inside a room. Thank you so much. Also, your vault looks amazing and now I want to restart mine because it's such garbage. lol

@robknight666

3 жыл бұрын

I know it's a bit late but you can connect an interior door to another intirior door...

@bricksie1391

3 жыл бұрын

Noti

There's already a 3-way hall piece with a "connect to door" part attached...

I wish Bethesda would actually test things.

@baptistbob1038

7 жыл бұрын

ikr. the dlc pisses me off.

@jetzeron

5 жыл бұрын

Exactly and so much missed effort with the cut content particularly the underwater vault and ghoul squid.

@monkey4222

3 жыл бұрын

1. Stuff doesn't click on well. 2. settlers go to the middle.

@quantumreptilecare1330

3 жыл бұрын

Ikr

@Monkey-sucker

2 жыл бұрын

Its bethesda What did you ecpect

I wish 'door switches' of the vault tec set actually worked, so unimmersive having to kick the slightly exposed edge to close doors, Also you synth voice is showing again Oxhorn, dont let the BoS catch you ;)

@brotherhoodofsteelpaladin5890

5 жыл бұрын

Thank you for alerting us, Knight. Ad Victoriam

Oxhorn, you are the truest fallout aficionado I've ever come across. I've been die hard on the on the fallout train since the beginning and I still play every single game. Thank you for making this community alive. It's folks like you who make me strive to learn all the lore as a whole. Thanks for all your content.

I was going "oooooohhhhhh" so many times in this. I FINALLY got this DLC and was struggling to where I tried some really bullshit tactics to make things work. thank god I come to you when I'm in a jam Ox. One of the few KZreadrs I feel i can trust with Fallout based stuff. This may be a year old but thank you so much

Just about the coolest, most convoluted, ill conceived and explained addition to an already stellar content package

why not just connect two doorways together for the Doorway trick? Looks nicer and you don't see the outside container part.

@coolsosa915

8 жыл бұрын

This is exactly what I did. Use the domestic doorway to [insert room] doorway, and save a rubber! (giggity)

@ragerqueen3622

4 жыл бұрын

Or use the cheat roommod and have unlimited resources. Giggity

15:50 oh wow! you gave a lot of good tiips here and helped me with the doors a lot but this is really mindblowing :D i would have never tried that lightbulb myself

When I was looking up a vault building tips video I was crossing my fingers you had made one. I seem to keep coming back to you for everything Fallout related. Please keep up the hard work and great videos sir!

@donierz

Жыл бұрын

Come on, don't play the fool.

A lighting tutorial would be helpful.

Great tips, Oxhorn! I haven't even started to tackle the vault because it's so huge and kind of intimidating.

Oxhorn you’ve saved me again building a vault was the hardest thing since the water level on sonic

6:12 wtf '-' that freaked the shit out of me lol

@grr251

6 жыл бұрын

Oxhorn = Synth Confirmed

@bluedogviking

5 жыл бұрын

I've noticed it in last 2 videos in a row.

I've been looking how to build a vault and I stumbled on to you. Dude, wtf it's been what? 3 years since I've heard of you? IM GLAD UR STILL ALIVE FUCK ELVES

@oxhorn

7 жыл бұрын

Eat bacon!

@p1nkbr0

7 жыл бұрын

This is one of the greatest threads I've seen on KZread and I can't explain it!!!

@noahm.9091

7 жыл бұрын

Oxhorn Why bacon? Why not cereal, or ice cream?

@marklangton6960

7 жыл бұрын

Noah M. Because bacon. Just bacon. BACON

@choesetrivel617

7 жыл бұрын

I AM BACON!

I really like the multi-story design of this, seeing other people's vaults I'm constantly getting annoyed that I've made mine so basic.

@tobe1207

Жыл бұрын

Scap jack do it again

Been looking for actually informative vault BUILD video for 2 hrs everyone just doing tours or just randomly build stuff no tips or or anything. Thank you! I will 👍 for sure!

Tip one just saved me. I’ve haven’t been able to figure this out and all other tip videos just jump past this. Thanks Oxhorn!

I have been watching your channel for 2 years and its just awesome

fuck, your patience is admirable. thanks for the tips. I just about gave up on building with the vault pieces but now I know where I was messing up.

Hey Oxhorn, you know instead of making that set up you made around 4:20 (get it?) you can just connect door to door, like for example corner piece door can connect to another corner piece door.

Man im just excited to see you work your magic and go crazy on the vault im super excited to see the finished product

@oxhorn

8 жыл бұрын

Thanks! I am hard at work.

Love your channel!! The level of detail you go into for tutorial content is amazing and your build videos never fail to impress. Keep up the great work! I have been building my vault for a hot minute now and I can't figure out how to build vertically with the atrium pieces. I want to create a super tall atrium and then fill it with towers of stacked room pods. Think Zion in the Matrix series. Help! I also can't wait to see your hydroponics center.

I am almost 25 years old now and Oxhorn still coming to my rescue....I needed this video! Room clicking!....and just like me he has no smelly elves or annoying gnomes in his vault!

That's all I needed help with was the first part lol. Thanks goodness it was quick. My brain was half dead spending 3 hours trying to figure out now to use the nursery, cafeterria, etc.

@royalheartgames4294

8 жыл бұрын

How

That part at 4 minutes was helpful to know. I figured out that you can kinda gimmick it that way, but felt like I was doing it wrong and there's gonna be a much simpler and intuitive way to get what I wanted and I was just missing it. But I guess there isn't. There's a simple 2 story atrium prefab that has a floor, the first and second floor wall, and a ceiling. There are the connection ports between the first and second story walls, but nothing snaps to it. You gotta use other pieces and create this awkward looking floating wall mess to snap a floor to, which you then lead to the atrium prefab. There are still several pieces I have no clue about. Like the columns. There's a bottom, mid and top and I have no clue if they serve a purpose and are needed to connect things or build certain things or if they are just cosmetic.

This video was such a big help. I spent an hour trying to build a clinic but nothing was snapping! Now I know what to do

This was helpful! I was about to give up but this solves some of my problems. Thanks!

very nice, and elaborate building. I'm just getting started with it so thanks for this it helped a lot.

Some notes I found extensively building with vault building - 2:08 - use the hallways with a doorway instead of the end cap to get right of that clipping animation from the doorway end cap. 6:03 - you could also use the hallway with windows or hallway with a door(s) to build the room off the hallway tile set. 10:56 - have you tried using the end cap? That how I make dead ends using the end cap piece. 16:17 I been using the ceiling fan in the middle for rooms and shops

For lighting corners of units/rooms use the smallest rectangular vault ceiling light with the grill. It will 'bury' in the curved ceiling corners until barely visible and still throws its max light.

Hi Oxhorn, I'm watching this video, and you were building a room inside a room, and were talking about a floor-ceiling part, which one must place in order to connect the doorway floor section. This also works with the floor only.

Thank you so much for this video I was having a lot of trouble figuring out why I couldn't connect things like a cafeteria to the hallway. Again thank you for the video

you made the door in a room thing way more complicated than it needed to be

Just a FYI: In regards to the beginning of the video, there is a 3-way hall to doorway piece under domestic that already includes the doorway. Also, in the second example, I would snap the "common" room doorway where you put the first "Floor + Roof" piece and then just snap a corner doorway to the other side. all doorways snap to other doorways.

For lights in my vault I just pushed them through the ceiling of my vault so they would rest on top of the prefabs and they were not problem for me. As long as no one asked where the light were coming from!!😂... Also you could put another prefab on top of it and it would light that one up too! So it's a great way to get around that pesky build limit!!!

Awesome tutorial..! helped a lot, I always wanted to build a huge vault but was afraid I'd hit the size limit and run out of Steel...

omg thanks so much these tips my vault looks so much better now

For a room within a room, you can snap room doorways to each other. So for the first doorway piece you tried to put down, it could have been the regular wall doorway part. Then you can connect a corner doorway to that straight wall part on the other side.

You sound like a cross between tom hanks and jack black. I love it lol. Good tips btw I've been struggling with building a nice vault

Good job man and NICE vault 👍🏻

You won me over with "well nigh impossible" ! Thanks for the great vids.

First thing you went over answered my question. Good job making it intuitive Bethesda. LoL Thanks for the vid!

Slocum's Joe ceiling light tiles are a god send when it comes to lighting in vaults.

Dude you sound like Tom Hanks and I can't unhear it.

Another trick to make a room inside a room is to use a door piece as an exit and connect it to another door piece

Thank you very much for this, and all of your Fallout 4 videos. They have helped and entertained me SO much...so much that my fiance is getting mad at me for watching "that guy" again lol

@oxhorn

8 жыл бұрын

hahahah tell her I'm sorry!

Will we be getting a full tour of your vault?

@cookiemuffin3208

6 жыл бұрын

MrDeathChicken yes

@erickg7167

4 жыл бұрын

@Private Dexter Grif I think they already figured out that answer about 3 years ago.

Oh ok thanks, great job with the vids u seem like a really nice guy and u really put a lot of effort into your vids by really explain what to do and how. Great job man!

Just found your channel, some great stuff here, keep it up! :)

Your vault looks great!

@oxhorn

8 жыл бұрын

Thanks! I hope to finish it soon so I can show it off

BRO I SWEAR TO GOD I WAS ACTUALLY SUFFERING FROM TRYING TO MAKE MYSELF OVERSEER FLAT BECAUSE I NEED TO PLACE SO MANY DOORS 😭 YOU ACTUAL SAVIOR 😭

I usually put a big multi floor atrium, with a shopping and eating communal area and a fusion reactor room in center somewhere. Then I always have a garage/hanger type utility exit in back with the garage door on a switch so I can exit with power armor in style

I came to this video for lighting tips. Yes, it totally needs its own video. Thanks.

Im so freaking glad you exist. Thank you!

Absolutely fantastic video!! Thanks much!

Thanks alot too oxhorn saved me from a mental breakdown

Thanks Oxhorn. Very helpful!

Thank you very much! Now I know how to make the various combinations.

3rd topic connecting a room on a stairway. You can also put the endcap doorway on the stairs and then connect the roompiece. Handy if you dont want the extra hall before the door.

I'm finally just getting into VT now, even though I have 1162 hrs in FO4 already, lol. I haven't watched anything or checked out VT mods or anything to do with VT so I'm completely blind. I'm a ways into it now and you should see some of the gerry rigging I have done so far with the building. For my first stairwells I've actually just put down a couple reaching a third floor level and then built the floors and walls around that, lol. Anyway, nice to see some tutorials since I am scratching my head over some stuff. Thanks.

Personally this is the best Workship DLC they added, once you figure it out. Definitely making yourself an overseer's office is freaken kick ass personally, the wood grain is beautiful.

I can hardly find a stimpack and he uses nukeacola quantums as decoration

@sqwatchy1010

7 жыл бұрын

Mystery man 2023 try increasing your luck stats when you level up.

@coltonadie4570

6 жыл бұрын

Try gitting gud.

@triggered2612

6 жыл бұрын

Mystery man 2023 try furniture mods :)

@disciple1381

6 жыл бұрын

Colton Adie try learning English

@TheMightySpoon3

6 жыл бұрын

plyby33181 r/wooosh

Oxhorn,1:40 you can get a Domestic Hallway-Doorway so you don't have to use the Hall Endcap. It's basically a threeway but with a door already built-in. I do like having the path to the room though, great idea.

You are the best, so much info, thanks a bunch. Wish I could find the Power cycle 1000, the pip boy says it has been built, but I can't find it anywhere and Clem is driving me crazy!

When looking into potential vault ideas and setups, I initially turned to Vault 81 and trying to replicate the Atrium feel that it had, might re-visit the Vault there when I go to remake my Vault 88. One interesting point I saw from others was using Wide Halls for better hallway structures (Including your Atrium to Wide halls, which was a new fact I didn't know when you shown it off) I'd also saw the implementation from Wide Hall to Vault door which also fits quite flush (Wanting to apply for entering the East Tunnels from the Entrance, as well as the two exit points) The question on whether Radiant power from the Power Conduits in Contraptions could help in making a more flush looking vault without the need for the Vault Power Conduit in each room/ every now-and-then for larger rooms/Atrium.

The Vault Tec Workshop has the worst snapping issues I have ever seen, the floating, THE F L O A T I N G !

I love this man. I was really confused tbh

This was really helpful thank you!

Thank you, I suck at building in fallout. This will help me out

Oxhorn! there is a 3way block with a door build in there already, your way is (sorry) whrong you are loosing space, and the pre build block looks (diffrent) better. ejoyed the video!

@XacinoDuck

8 жыл бұрын

(only the hallway blocks tough

Oxhorn: builds everything super huge and made from all types of vault walls Me: I think building everything out of only domestic types looks nice

Wow. I didn't know that you needed one of those doorway end pieces to even connect the vault to the rooms, so I barely even spent any time working on the vault. In fact the one room I had was the Overseer's office which was placed at a lopsided angle. Lighting frustrates me to no end too. I hate that the Atrium's pretty much completely plunged into darkness thanks to how lighting works, so no matter how I toy around with it I can't get anywhere to be properly lit up unless the ceiling is low enough.

The atrium pieces are split into bottom floors, middle floors, and the ceiling. Because the atrium doesn't have a ceiling connection point, you couldn't snap to it. But you probably could have put a backwards bottom wall.

Thanks man first thing u said was what i needed love u❤

for the 3 way there is already a version with a door, and for the trying to connect rooms in rooms just add a door panel by itself and then attach the corner itself

There is a three way door piece, lot less placing things. Also I find that building in a modular style is much more true to the design. A room doorway also will snap to a room doorway. This allows for a very modular design. I have my residential setup much like you do, but utilize the three way door hall and it will save you much time :) Also at about 4:15 you could of easily accomplished the same thing by utilizing two door/floor/ceiling pieces. Just snap them back to back... Only two pieces then, also will help with build limit ;)

I don't use any lighting mods but the best vanilla light is the row of light bulbs. Attaches easy and not much dark area.

Very good video, Sir! Very good!

also I want to know how you did the water area in the beginning with the fountain!

Running power. Conduits vs. Wires. And more on the lighting. And build size maximums.

a how to on electric conduits from vault tec. would be awesome.

Thank you this video was very helpful

This helped me So so much thankyou!!!

Great guide! Learning it naturaly would take many hours. So thanks for the effort!!

Just pissed of the evil ghoul lady at Vault 88, she left, tried to start building, OY!!! Thanks, great video.

What annoys me is I want clean settlers for my vault, but they're all dirty.

Thanks oxhorn

I haven't started building my vault yet but I can almost guarantee you I would have thrown a brick through my TV before figuring this out. My wife thanks you for saving the TV. =)

6:15 HIS REAL VOICE?

@nukedestroyers290

8 жыл бұрын

what the hell lmao

@benson2873

3 жыл бұрын

What in the sam hell was that?

Thank you! This helps out alot

I figure most of 1 myself, but 2 had a few tips I needed!

I love Vault 88 and this DLC, building a vault is somehow relaxing and almost therapeutic xD. But man, they should've made some really powerful lights for this DLC. I used to play Fallout 4 on my old gaming laptop (4th gen i7, gtx 675mx... yeah, quite shite for 2020), and in that computer, I barely managed to get playable FPS, and that's by only having a few of my dozens of rooms actually full of stuff, other than just a few beds (only the kitchen, hydroponics, and gaming rooms had actual decorations). And with my new R5 3600XT, RTX 2080 super PC, I thought it would blaze that vault, with at least a nice and comfortable 30 FPS when I did some more decorating. But for some reason, I still get crappy FPS even in my new system.. Not as bad as with my old system, but still not even close to 60 FPS before even starting filling the rooms. The reason why, I believe, is the borderline absurd number of lights that I've had to add to the vault so that you actually feel like there's a realistic amount of light (not even that much light, just the "right" amount of lighting). I really believe that lights tank your FPS, and if there's a mod out there that makes lights shine on a bigger area, count me right in!

No Wonder it runs so slow! You gotta place three things on top of each other; makes sense in the vault tec built out of the box fallout way a little too much, but it sucks you may have to constantly see that clipping

Instead of using the floor and then a door endcap you can just use the regular room wall that already has a doorway in it or a corner doorway, that way the walls look flush without any interior walls exposed