Step by Step instructions on Jeep XJ valve cover gasket
Жүктеу.....
Пікірлер: 24
@WilberWiley19 күн бұрын
Excellent video. Clean simple and accurate. Thankyou!
@MajorWeakness
19 күн бұрын
Thanks
@MurphManPB Жыл бұрын
Just a heads up, those metal sleeve caps (Torque limiter sleeves) that you popped out are supposed to reinstalled over and thru those new rubber grommets. They're intended to prevent squishing the gasket. If you had any leaks, this could be a reason why. Hopefully you held on to them or else you'll have to make a trip to junkyard.
@MajorWeakness
Жыл бұрын
I'll have to re-watch the video lol to remember what you are referencing. I haven't had leaking issues but I'll check
@ibberman
11 ай бұрын
Looking around 9:20 it doesn't look like he used them 👀👀
@girlgolden84912 жыл бұрын
Those Jeep blueprints…Major grooviness!!! Replacing the valve cover gasket so no oil leaks -yeah, that’s groovy too.
@danhambrick63312 жыл бұрын
Nice job Major.I used the FelPro gasket on my 4.0L about 5 years ago and haven't had any issues yet.👍👍💪
@sir.gooseington64882 жыл бұрын
Thanks for the great walkthrough, doing this tomorrow and fingers crossed there's no sludge.
@MajorWeakness
2 жыл бұрын
Good luck!
@joshholder8848 Жыл бұрын
Thank you for this video! Confidence up to 100 that I can do this on my own.
@MajorWeakness
Жыл бұрын
Glad it helped
@Controlledchaosjeep2 жыл бұрын
Nice job, great video!
@chiotisaa40882 жыл бұрын
"This is made in China, this is concerning" LOL .. great video thank you!!
@flakotrujillo8277 Жыл бұрын
How do you get the back bolt on the valve cover seems like my ratchet isn't sitting on the bolt right seems like I don't have enough room
@MajorWeakness
Жыл бұрын
I used a 1/4 drive socket as they are thinner and smaller to fit in tighter spaces
@michaelmixon2479 Жыл бұрын
What is the purpose of the nut on stud?
@MajorWeakness
Жыл бұрын
Actually the fuel rail wiring harness clips to these on mine. Other than that I don't see a reason. Probably an assembly line thing
@OddBallCherokee Жыл бұрын
Where would you get a new cruise control end piece? My plastic end for the cable to attach to the throttle cable has snapped 93 country
@MajorWeakness
Жыл бұрын
Ebay or Deadjeep.com
@officialWWM2 жыл бұрын
I’ve just done mine. Pain in the butt.
@MajorWeakness
2 жыл бұрын
hope there are no leaks in the future:)
@officialWWM
2 жыл бұрын
@@MajorWeakness me too…but I totally expect there to be 😂
@atoniouspoole31152 жыл бұрын
where did u purchase the gasket set and how much was it.
Пікірлер: 24
Excellent video. Clean simple and accurate. Thankyou!
@MajorWeakness
19 күн бұрын
Thanks
Just a heads up, those metal sleeve caps (Torque limiter sleeves) that you popped out are supposed to reinstalled over and thru those new rubber grommets. They're intended to prevent squishing the gasket. If you had any leaks, this could be a reason why. Hopefully you held on to them or else you'll have to make a trip to junkyard.
@MajorWeakness
Жыл бұрын
I'll have to re-watch the video lol to remember what you are referencing. I haven't had leaking issues but I'll check
@ibberman
11 ай бұрын
Looking around 9:20 it doesn't look like he used them 👀👀
Those Jeep blueprints…Major grooviness!!! Replacing the valve cover gasket so no oil leaks -yeah, that’s groovy too.
Nice job Major.I used the FelPro gasket on my 4.0L about 5 years ago and haven't had any issues yet.👍👍💪
Thanks for the great walkthrough, doing this tomorrow and fingers crossed there's no sludge.
@MajorWeakness
2 жыл бұрын
Good luck!
Thank you for this video! Confidence up to 100 that I can do this on my own.
@MajorWeakness
Жыл бұрын
Glad it helped
Nice job, great video!
"This is made in China, this is concerning" LOL .. great video thank you!!
How do you get the back bolt on the valve cover seems like my ratchet isn't sitting on the bolt right seems like I don't have enough room
@MajorWeakness
Жыл бұрын
I used a 1/4 drive socket as they are thinner and smaller to fit in tighter spaces
What is the purpose of the nut on stud?
@MajorWeakness
Жыл бұрын
Actually the fuel rail wiring harness clips to these on mine. Other than that I don't see a reason. Probably an assembly line thing
Where would you get a new cruise control end piece? My plastic end for the cable to attach to the throttle cable has snapped 93 country
@MajorWeakness
Жыл бұрын
Ebay or Deadjeep.com
I’ve just done mine. Pain in the butt.
@MajorWeakness
2 жыл бұрын
hope there are no leaks in the future:)
@officialWWM
2 жыл бұрын
@@MajorWeakness me too…but I totally expect there to be 😂
where did u purchase the gasket set and how much was it.
@MajorWeakness
2 жыл бұрын
Autozone and was about 40.00