Could watch this all time long.... very interesting and pure Chill Out for me due to this great music. Thanks for your great channel. I learn a lot.

@vallejocolors

Жыл бұрын

Thank you so much ❤️

Just trying some out and so far I'm impressed! Makes doing aluminium aircraft easy. 👍

Other great Video of José Brito (Smurfie hands....). Congratulations ;)

Metal colours look great, definitely worth adding to the paint rack....👍

I went from using game colour metallics I got in my set to using these. The difference between the two is night and day. Look better, paint better, cover better, just amazing.

@vallejocolors

5 жыл бұрын

Hi Bento, Thank you very much for your comments.

VERY NICELY DONE. I AM ABOUT 1 YEAR INTO THE AIR BRUSH THING, MOSTLY ON AIRCRAFT MODELS. IT TAKES LOTS OF PRACTICE AND YOU SEEM TO HAVE IT DOWN..AGAIN NICELY DONE!

@smoobydoo3249

5 жыл бұрын

if you think blasting the paint onto something until it gives an orange peel effect and looks ready to run off is 'down' you are talking all the wrong advice

As always Vallejo paint come out on top, my flavoured paint. 10/10

@dereks2306

5 жыл бұрын

Reminder that consuming paint is bad for your health, no matter how delicious it is

These paints are great for brushing but I cannot get them to airbrush consistently and give an even coverage. I've tried out of the bottle, with Mr Color Leveling Thinner, with water (amazingly bad), 15psi, 20 psi, 25psi, 1.8mm needle, 3mm needle (both Badger SOTAR) all deepcleaned between tests, with Tamiya X-1 as primer, Vallejo 77.660 (the recommended primer) as primer and just onto degreased plasticard. The coverage was so uneven that at one point I even thought I'd reassembled my airbrush incorrectly, so I did a quick flush and sprayed some Tamiya X-11 Chrome Silver but had no problems whatsoever.

@tonyromano6220

2 жыл бұрын

Do you live in a area with high humidity? I have always had mixed results, Houston and Savannah. I wonder if it is the high humidity or AC…… I will try some Tamiya.

Really amazing paints!

EXCELLENT! NOW I KNOW MORE ABOUT THE VALLEJO METAL PAINTS.

@vallejocolors

2 жыл бұрын

😊😊😊

Awesome effects, thanks!

@vallejocolors

3 жыл бұрын

Thank you Chuck!😊

man this guy is an artist...

Vallejo toilet paper: "the result is truly amazing and ultra accurate"

@rybuds47

4 жыл бұрын

Your comment just made me shoot coffee out my nose haha Cheers!

@TheCimbrianBull

3 жыл бұрын

LOL 🤣 😅 🤣

@kurodahyokazahuchi5344

3 жыл бұрын

LOL

@vasilileung2204

2 жыл бұрын

It flows really well and only one pass is necessary

@xRepoUKx

2 жыл бұрын

@@vasilileung2204 whilst showing 2 or even 3 passes!

amo la música de estos videos, en serio que buena

Very nice. good information. many thanks.

Really good video! On which pressure did you set the airbrush? I am running on 1.2 bar and its not really Spraying evenly...

Отличные краски. Жаль - 27 их не заказать. Привет из Омска, Сибирь.

Many thanks. I used AV paint a lot, and recently have had very good experience with the metal series. The only issue I got is for 77657. I always made it too thick, so the surface is not so even. I don’t have such issue with other AV metals. Appreciate for any tips. Do I need to dilute it more? Am using 2.5 Bar / 30 psi. Also I feel a bit hard to observe whether / how the 77657 has been painted as it is very transparent… thank you so much.

could you add a small white border around the text in the next videos? Would make it easier to read on a darker background :)

@vallejocolors

6 жыл бұрын

Hi, we'll do it for future videos and try to make them easy to read. Thank yo very much for your comments.

@pawpawstew

4 жыл бұрын

Or just enter into a joint venture with those in your major markets. You provide the video, and they narrate in their native language.

It is an amazing paint which could be airbrush or paintbrush.

I used panzer grey primer for the metal gold and the result was a bit greenish. Should I use a light brown primer, or the gloss black primer you used in the video to achieve a nice yellow gold? It would be for a Bracelet of Anubis

What's the recommended pressure to spray these with?

AV some of the best paints in the hobby industry just wish your website had a online shop 😔

hi let say i want a metallic red on my gunpla , i want to glow as much as possible what kind of paint should i use? gloss black > Metal color(what kind?) > Clear red > metal varnish?

What air pressure do you use for your airbrush in this video? I have an Iwata airbrush if that makes a difference.

Esta muy bien,un buen tutorial,pero hecho de menos una traduccion a español....Porque son muy interesantes tus videos y se nota que eres un artista en esto

how did you do the blood effect on the sword?

So im using a couple of these and I love them. I just painted a plane with the aluminum. What varnish should i use to keep that metallic shine I have right now with just the aluminum paint? Matt? Gloss? Semi? Please help me!!

@vallejocolors

4 жыл бұрын

Hello. Try with gloss. We recommend to check the result in a small part, so you can see if you like it. Regards.

Can the metal varnish only be applied to metal colors? Or can it be to any metallic paint? What would be the different outcome if I used the metal color varnish vs Mecha color gloss varnish over metallics and what is the drying time?

Llevo treinta años comprando Vallejo, suerte y al toro

@AngelCastillo-le3mc

5 жыл бұрын

hola francisco, una pregunta. tu cuando usas estas pinturas, usas un respirador?

can i mix the metal color with other Vallejo color range

Amazing

Nice video! Do you dilute any color before airbrushing? What needle size? What airpressure? Thank You!

@vallejocolors

6 жыл бұрын

Hi Stefan, The primer must be well shaken and can be used directly from the bottle. Pressure around 1.5Bar and needle 0.4mm. If does not work like this, try add some thinner. ratio 75/ 25 (Primer/ Thinner). Hope you find it useful.

Nice video, really shows how realistic the colors look. I just have one request. Can you maybe list all the metal colors from darkest do brightest (excluding Copper and Gold) so that we have a general idea where to start. I'm afraid i would buy the wrong color and its hard to see which ones are the right ones for me

@vallejocolors

3 жыл бұрын

Hello Manuel, you have our catalogue available in our website. Maybe it can help you with this :)

@tureliondurr

3 жыл бұрын

@@vallejocolors Thank you for the answer. You make great paints

Lovely finishes! I have a problem, however, spraying the Vallejo Metal Color Exhaust Manifold and Pale Burnt Metal with my 0.3 Iwata at 15 psi... the paint keeps on stuttering, and then it comes out in a rush. I have cleaned the airbrush meticulously, and it's used ONLY for pure acrylics. Any ideas?

@vallejocolors

5 жыл бұрын

Hi, please try 20psi and with a ratio of 75/25 (Paint/ AV Airbrush Thinner).

@raytheron

5 жыл бұрын

@@vallejocolors Thanks, will try that!

Amazing! Could you do this with a normal brush? Or are these paints only really best used with an airbrush

@vallejocolors

5 жыл бұрын

Yes. You can use them by brush as a regular paint. Apply several layers to get the best results. Airbrush Thinner can be used as thinner.

@rebelsatcloudnine

5 жыл бұрын

I've tried hand brushing these a few times, they require a few layers to get the color down, but it is doable. However I've found that these are really quite fun to airbrush, and they have a beautiful tone to them. I'll be using these in full detail in an upcoming P-51 build.

Excellent videos, also the music in the background is really good, would you tell us the name of the song or the artist. Thank you very much

@chrisbaginski7425

4 жыл бұрын

kzread.info/dash/bejne/jGWfl7Zugs_eYcY.html

Wish I could find some in stock!!!

Can you paint over the seal varnish like WW2 Japanese planes? I want to make a paint chip effect on Japanese planes. I'll use liquid mask to make a chipped IJN and IJAAF green over aluminum effect.

@52down

2 жыл бұрын

2 ways to do so 1. Use a sponge method 2. Paint entire airframe in metal color, places you want to chip out cover with chipping medium, spray camouflage color and whipe out with water after colors dry

Thinking of using these paints. Can they just be brushed on as well?

@konstantinosv.2858

5 жыл бұрын

Yes!

So you‘ve not used any airbrush thinner at all?

It is the same paint as the vallejo model air color ? cause I have the 2016 metallic air color like "Model Air 063 Silver", and I never use them. I want to know if it will be good for the WW2 scale plane. Is it as good as aclad?

@stevie65able

4 жыл бұрын

This is a different range than the model air. From what I have read this is a better metallic paint. I have only used this paint and it is excellent. Alclad is excellent but very fiddly to use.

cool video but my most important question i not answered. Do you need to dilute the paint? If so, can you use the normal Vajello thinner or do you need some other stuff?

@vallejocolors

3 жыл бұрын

No, you don't need it but this depends on your likes and needs. You can thin them with water or Thinner.

Can't find this paint anywhere. I'd love to try it.

@gregqualtieri609

3 жыл бұрын

Check Micro Mart tools, Mega Hobby

Which vallejo metal Paint would you recommend for a p-47 in 1/32 scale?

@vallejocolors

3 жыл бұрын

It depends on the finish you want to achieve...

No thinning needed for any of the ‘Metal Color’ paints? Is that the same for ‘Model Color’ paints?

@vallejocolors

5 жыл бұрын

Hi Jeff, Metal Color is for airbrushing and does't need to be thinned. Model Color is brush formula and it's not for airbrushing techniques, but you can use it if you thin the Model Color paint with airbrush thinner,

amazing ! O_O

Very informative. A word of advice: make sure viewers can read your superimposed graphics. Occasionally the black of the graphic ends up over a black area on screen, rendering the word or words illegible. Other than that, great video. Thanks.

@vallejocolors

3 жыл бұрын

thank you for your feedback Ross!! We will take note of it! :)

Forget the metal colors, how were those tank treads done?!

Hola!. Podrían subir un tutorial de cómo usar su producto crackle medium 70.598? Gracias.

@vallejocolors

6 жыл бұрын

Hola Alberto, Estamos trabajando con este producto. Esperamos pronto subir un video de cómo usar el craquelador. Muchas gracias por tus comentarios!

Great video BUT to all similar videos involving how to airbrush Model air/color,primers and varnishes you should always mention the air pressure/precise mixing ratio.

@rebelsatcloudnine

5 жыл бұрын

From my experince, I find they are good to go straight from the bottle (after they have been mixed thoroughly mind you) no extra thinner needed. I airbrush regularly at about 25 psi, but with these paints, I've found that's too high for them, so I lower the pressure between 20-15 psi, and they flow on much nicer, and I have more control.

Can youbrecimnend a Good Brush on Brass

do we need to wear respirator or protective mask when using vallejo paints?

@Rorynes

6 жыл бұрын

k kk always use a mask whatever you spray.

@tonyromano6220

4 жыл бұрын

Just for overspray partials, no toxic carrier.

Hola! Un pregunta: se pueden conseguir acabado tipo espejo? Se prodría conseguir tal efecto puliendolo con cremas pulidoras Tamiya o se tiene que poner una laca transparente encima? Saludos al canal!

@vallejocolors

3 жыл бұрын

Hola Jonathan, con Metal Color es un poco complicado conseguir efecto espejo. Al pulir la pintura se pierde la capa porque suele ser muy fina. Aunque tengan un acabado brillante, no se conseguiria un acabado tal como el que buscas con el pulido :)

Thanks for the video, can you spray Vallejo Acrylic Varnish on Vallejo Metal Colors?

@vallejocolors

8 күн бұрын

Hello George! Of course you can :)

Please can you always add some notes as to whether you are using diluted paint and if so what ratio and what thinner?, undiluted paint?, Nozzle size? Air Pressure? Thank you

@vallejocolors

3 жыл бұрын

Hello Melvin! You can use thinner and improver with our Metal Color range (or use it straight from the bottle) and also with our Model color range. This is a chart where you can check the ratios of water thinner you can use facebook.com/vallejocolors/photos/a.296855687010167/4144607128901651/?type=3 Regarding the noozzle and pressure: 0,4 goes well and also 15-20 PSI should be perfect but you can change it depending on your needs.

@melvinlonghurst8394

3 жыл бұрын

@@vallejocolors Thank you kindly for your reply, if you could additionally provide the same information for all of your paint range that would be very helpful. Thank you

I used the exact primer and chrome from vallejo, but on some pieces the metal color looks frosted while small pieces look more glossy, why is that? I only diluted the metal color with some drops of vallejo primer.

@thefruitdealer4970

4 жыл бұрын

I think its because you need to thin the colour a little more! It's too thick

@martinbecka87

4 жыл бұрын

Honestly,it's because that gloss primer is rubbish. Dries into glossy but grainy surface which is not suitable for profi metalic finishes. Maybe different primer would help (but that would be a lacquer one) or just don't use it at all. Chrome or duraluminium are really great for waterbased acrylics and here is how I used them for nice metalic surface: 1. Prepare the plastic - smooth it with sanding sponge to at least 3000 grit. 2. Mix the paint with one drop of Vallejo flow improver. 3. Set the low pressure (optional) 4. Spray it in very light passes.

Does this work for chipping as well

@DansModelBench

4 жыл бұрын

Yeap. I use it with a sponge for chipping and it works great. Very forgiving and easy to use paint for metallic. Dan

How do these paints stand up to masking? (Tamiya tape for example)? Also how durable are they for handling?

@vallejocolors

2 жыл бұрын

You can mask our paints with two options (liquid mask or masking tape). We have available both and although Metal Color dries very quickly and is resistant after application, it is advisable to wait 12 hours after application before applying any paint masks or tapes.

@MisterHampshire

2 жыл бұрын

@@vallejocolors Thank you :)

@supercededman

Жыл бұрын

From a favourable review elsewhere, the guy recommended using the Vallejo Metal Varnish. Makes sense to me.

What pressure are you spraying at in this video.

@vallejocolors

3 жыл бұрын

Usually, when using an airbrush the pressure on the compressor must be 1,8-2,0 bar.

This is my husband account and while he was watching this vídeo i was enjoy the music! Can u tell me the name of the music in the background?

@STEAMBOLTANNIE

5 жыл бұрын

REALLY!

@chrisbaginski7425

4 жыл бұрын

kzread.info/dash/bejne/jGWfl7Zugs_eYcY.html

Where did you get the blood effects?

@johnnoble01

3 жыл бұрын

Tamiya clear red is good for blood.

Al usar METAL COLOR debo diluirlo con THINNER para usarlo en el AEROGRAFO???

@vallejocolors

5 жыл бұрын

Sí, te recomendamos usar el Airbrush Thinner. Es recomendable usarlo con todas las pinturas acrílicas para obtener un mejor resultado y no atascar el aerógrafo. Si usas la gama AIR, estas pinturas ya vienen preparadas especialmente para el aero, y no es necesario usar Thinner, aunque puedes hacerlo si quieres obtener una textura más fina. Un saludo!

Interested to try this out. Is there anywhere I can find swatches of the color range for reference?

@vallejocolors

6 күн бұрын

Hello Krozbone! Thank you for your interest in our METAL COLOR range 😊Sure thing! Check out the following video to see how these colors turned out. It's not an official review, but you'll get to see the results! ➡ kzread.info/dash/bejne/jHygqs19ldOfcpc.html We hope this helps! 💪🏻

@Kr0zBoNE

6 күн бұрын

@@vallejocolors much thanks for the reply!

@vallejocolors

6 күн бұрын

@@Kr0zBoNE You're welcome :)

Waht was the pressure when you used the primer? And what was the size of the needle?

@mikewenski6269

6 жыл бұрын

I'm also interested. Priming isn't that smooth for my airbrush

@vallejocolors

6 жыл бұрын

Hi, The pressure is around 1.5Bar and needle is 0.4mm.

@vallejocolors

6 жыл бұрын

Hi Mike, Regarding the priming smooth... well, the primer must be well shaken and can be used directly from the bottle. Pressure around 1.5Bar and needle 0.4mm. If does not work like this, try add some thinner. ratio 75/ 25 (Primer/ Thinner). Hope you find it useful.

@dobojani

6 жыл бұрын

Thank you for your answer!

How do the Metal colours range compare to the Model Air metallics?

@vallejocolors

Жыл бұрын

Hello, The Pirate Penguin! Model Air metallics formula has great metallic pigments and a matt finish. On the other hand, Metal Color is an innovative range of metallic colors which uses aluminum pigments in its formulation. The Metal Color range offers a wide range of shades of exceptional brightness and extraordinary power of reflection 😄

@thepiratepenguin4465

Жыл бұрын

@@vallejocolors Thank you for your response, it has been most helpful.

@vallejocolors

Жыл бұрын

@@thepiratepenguin4465 Thank you so much! :) We're glad that it helped you! :)

Y no necesitan disolvente para usarlas en el aerógrafo?

@vallejocolors

4 жыл бұрын

Le puedes añadir unas gotas de thinner pero puedes usarlas directamente del bote

Hola Vallejo! I am a pakistani who wants to use acrylics from vallejo I just want to ask on your website do you ship worldwide or to Pakistan?

@vallejocolors

Жыл бұрын

Hello Rockabie00! We don't serve artists but distributors and hobby stores. Please, take a look at our website; in the interactive map you have this info available :) HOBBY LOBBY PAKISTAN Shop # 29, Center Point Plaza, Gulberg III, Lahore, Punjab 54660, Pakistan Tel. +92 323 5764234 Tel. +92 423 5764234 www.hobbylobby.com.pk

can I use a brush instead of spray?

@bentosan

6 жыл бұрын

yes these are amazing to brush paint with

@nicholassinnett2958

5 жыл бұрын

I've been using the Gunmetal Grey with a brush, and it goes on really well. Just build it up in a few thin coats, and give the paint on your palette a stir every few minutes to stop the pigment and metal flakes from separating.

@darwinchee8722

5 жыл бұрын

@@nicholassinnett2958 do you thin the metal colors? if so, what do you use to thin them with?

@nicholassinnett2958

5 жыл бұрын

​@@darwinchee8722 Just a tiny bit of water for normal painting, or some Vallejo Thinner Medium if I want the paint transparent. They barely need it unless you're using them for blending or something.

@darwinchee8722

5 жыл бұрын

@@nicholassinnett2958 thanks man!!!

needle size and pressure please - just about the 2 most important bits of info - I can NEVER get these to spray well...

@vallejocolors

2 жыл бұрын

Hello Tony! The bigger the needle, the easier to airbrush these colors due to its pigments :) and the compressor air pressure is recommended at 15 - 20 PSI or 0.5 to 1 kg.

Siendo una empresa española lo podríais subtitular en español, digo yo!.

@vallejocolors

6 жыл бұрын

Hola Francisco, nuestro público es un 75% de habla inglesa, pero estamos mirando la posibilidad de hacer videos en inglés con subtítulos en español. Muchas gracias por tus comentarios!

✋➕👍

well now I have a good Airbrush, Pump, and so but NO PAINT

@konradalexander7561

5 жыл бұрын

Welcome to the poor modellers club

Nice concepts. The silent video with airbrush sounds sort of sucked. Turned volume down quickly. Air brushing techniques seemed odd. You started and stopped over the parts. Instead of starting of the part, then going over it, finishing clear. Stops excessive paint build up. Finally, was that a gladius sword at the start? I thought they were bronze, not steel...

sadly i wont use vallejo because the paint clogs my brush a lot and its a pain in the ass to clean.

@vallejocolors

2 жыл бұрын

Hello! If you need help with cloggings, let us know so we can help you. Many painters use our colors daily without a problem so we want you to be one of them too :)

Que lastima que un producto tan bueno y producido en España no sean capaces de hacer unos videos en castellano. Como siempre " haciendo pais "

@vallejocolors

6 жыл бұрын

Hola Josep, nuestro producto se exporta a todo el mundo bajo marca española y fabricado en España. Pero nuestro público es un 75% de habla inglesa, de todas formas estamos mirando la posibilidad de hacer videos en inglés con subtítulos en español. No es la primera vez que alguien comenta lo mismo y es algo que se repite. Disculpa las molestias y muchas gracias por tus comentarios!

@jopahe69

6 жыл бұрын

vallejocolors Hola, gracias por responder. Si quereis aumentar la quota de mercado de habla castellana tendriais que invertir bastante mas en esta lengua, creo que es basico ya teneis una buena parte de la clientela de habla inglesa, abrir tiendas on-line como otras marcas nacionales eso también ayudaria bastante. Gracias y por favor editar en castellano que tenemos muchos modelistas del pais.

could i get away with just using a cheap dust mask when spraying this paints in doors with the window open?

@vallejocolors

5 жыл бұрын

Hello. Yes, you can. You do not need special protection to use our paints with airbrush. You can use your airbrush even with the window closed.

Buenas noches. Soy un chaval principiante en el tema de pinturas que está pintando un ejército de Age of Sigmar. Para ser sinceros, las pinturas Citadel son excelentes pero prefiero la gama Model Color. Actualmente uso el Retributor Armor de Citadel y quiero virar al METAL COLOR 725, ¿Cómo de parecido es? ¿Tienen ustedes una tabla comparativa? Las que he encontrado no están del todo completas ni son "oficiales". Un saludo y muchas gracias.

@vallejocolors

4 жыл бұрын

Hola, no tenemos una tabla comparativa, lo sentimos mucho.Nos alegra mucho que te guste la gama Model Color :)

primers are awful. They easily peels off, no sanding/filing possible at all

@smoobydoo3249

5 жыл бұрын

you need to let them cure for a few days before messing with them.

whatressure didyou use?

@vallejocolors

Жыл бұрын

Hello Dick Smith! For airbrushing these colors, the compressor air pressure is recommended at 15 - 20 PSI or 0.5 to 1 kg.