No video
UV Protection Amulet
More info: mitxela.com/am...
/ mitxela
paypal.me/mitxela
00:00 Intro
01:29 Plan
02:16 Metalwork
05:47 Threading talk
08:40 First thread
12:25 Second thread
15:19 More metalwork
21:40 Soft Soldering
24:49 Electronics
33:42 Software
35:28 Sensor rant
37:38 UV-Index explanation
41:20 Neat renders
41:52 More sensor rant
42:58 Gold plating
45:37 PCB assembly
49:27 Demo
51:43 Instruction manual
Пікірлер: 647
"I'm eyeballing it, but I'm eyeballing it carefully" Love this definition of engineering
@KnowledgePerformance7
2 жыл бұрын
Laser eyeball
@markfergerson2145
2 жыл бұрын
And eyeballing it to the raw surface of the stock rather than the cut surface...
@dvdemon187
2 жыл бұрын
8:47 This is going to be my new work credo. Eyeballing stuff _"carefully"_ 🧐
@jasontwynn7356
2 жыл бұрын
OMG,I started laughing so hard . I woke up my wife at like 3am. Eyeballing it carefully,what I laugh.
@eviethekiwi7178
2 жыл бұрын
in the industry we call this using your ‘eyecrometer’
"I suppose I'm afflicted by a unique kind of laziness where you end up doing more work" that's called engineering
@endlesswanderer1753
2 жыл бұрын
The hell. I've been an engineer this entire time, but I'm getting paid like a teacher.
@king_james_official
2 жыл бұрын
@@endlesswanderer1753 university teacher?
@rgkm9356
2 жыл бұрын
nah that's adhd
@fkknsikk
2 жыл бұрын
Quantum laziness.
@Silverfi5h
2 жыл бұрын
Slothfulness is not doing anything, laziness is finding more effective/efficient ways to do stuff. Be lazy
One thing i noticed is that if your friend has any sunscreen on their fingers when they touch the amulet, the sunscreen can potentially coat the sensor and offset the measurement.
@cid3384
2 жыл бұрын
underrated/10
@professored7169
2 жыл бұрын
You didnt notice that, you thought of that
@ettat.3806
2 жыл бұрын
@Professor Ed why thank you for that studious and essential correction
@professored7169
2 жыл бұрын
@@ettat.3806 And thank you for your needed insight, very thoughtful and helpful 🖤
I forgot who this was, then i remembered, oh it has been a journey. So glad to see you back. Love your projects.
@Taras195
2 жыл бұрын
Same
@rasmis
2 жыл бұрын
I saw the video title in my subscriptions and thought “Am I following someone who'd believe in an amulet protecting against UV?” Great video.
@josepaz700
2 жыл бұрын
Hehehe happened just the same although the name was so familiar. Great @mitxela, you are admirable 👍🏻 I am a fan hehe
@piefadaseyt7893
2 жыл бұрын
exactly
@cameodamaneo
2 жыл бұрын
Damn, I think this exact thing every time I come across one of his videos. Perhaps he should change his name to something more memorable?
24:45 Do you even know how the full saying goes? "A Jack-of-all-trades is a master of none, but oftentimes better than a master of one." As this project so perfectly and elegantly demonstrates.
@hikingpete
2 жыл бұрын
"The" "full saying"
@GirishManjunathMusic
2 жыл бұрын
@@hikingpete are we just quoting random words?
@Encysted
2 жыл бұрын
@@GirishManjunathMusic No, Stefan is pointing out that there are a few sayings that purport to be a completion of the common short version, and it's under question whether the short version is incomplete in the first place.
@GirishManjunathMusic
2 жыл бұрын
@@Encysted ah.
@Z-Ack
2 жыл бұрын
Yea but a trade full of jacks. Would you master the jacks or the trading of the jacks? And what kind of jacks are we talking about? And aside from the toy, how would one master a jack? Adding a master of trade is only a master until someone says “no”….
He's back and there's an hour of content!?! Am I in heaven?
@zeroni13
2 жыл бұрын
Had the same thought!
@haifutter4166
2 жыл бұрын
Only noticed that nearly an hour had passed when the video ended. Guess that speaks for the quality of his video.
How to improve it: 1.) Use individual sensing diodes for various UV wavelengths and measure the values yourself with ADCs. 2.) Use an electronic paper display, it fits perfectly with this project. 3.) Make it solar rechargeable with a little super-capacitor. 4.) Add a quartz glass window.
@MrPhilip796
2 жыл бұрын
are there epaper displays with the dimensions of a CR2032 battery?
@cezarcatalin1406
2 жыл бұрын
@@MrPhilip796 Is it really necessary to make it the dimensions of a certain battery ? Like, what if it’s solar rechargeable with a supercapacitor for energy storage ?
@MrPhilip796
2 жыл бұрын
@@cezarcatalin1406 I feel like it'd end up looking weird if you didn't fill out the round window of the amulet, and I mean I don't wear jewelry, but if I was to I don't think I'd wear something that looks weird as that just seems to defeat the point?
@cezarcatalin1406
2 жыл бұрын
@@MrPhilip796 Ok, that’s actually a good point... maybe we can have a round epaper ? Or... maybe we can have a square amulet... OR maybe we can have an amulet like a star with 8 corners made of two squares placed at 45 degrees and that allows both a square screen and other sensors/things in the other four corners.
@TheRailroad99
2 жыл бұрын
great idea, but I agree with the fact that this would look weird with a square/rectangular display. Also, the small size is what makes it unique.
"if you drink this bottle, you won't even get sick -- you'll straight up DIE" - That was just perfect. The extremely dry way he said it made me laugh out loud.
To say you're an inspiration is an understatement. More long-form videos please!
ah its fun when the documentation looks good at a first look, so you develop for it, and then realise it makes no sense reminds me of a certain home server program whose example plugin the software refuses to load, and the documentation is full of "this function takes two float inputs and outputs a char. but what does it actually do? secret ;)"
@CristiNeagu
2 жыл бұрын
Ah yes, the old "setValue - this function sets the value" type descriptions...
@demoniack81
2 жыл бұрын
Honestly the amount of times the published example for even popular libraries flat out doesn't work is ridiculous.
@KnowledgePerformance7
7 ай бұрын
Made this mistake in a systems lab class, datasheet provided information suggesting the sensor we were using was first of first order response and our best fit was a crazy second order with free integrator. Never trust the datasheet unless you have already checked the product yourself.
I've never even seen a lathe in person, but machining seems so extremely satisfying. Being able to make high quality good looking metal parts that combine form and function must make you proud.
@carloshernandez2561
2 жыл бұрын
It's really awesome getting the parts finished. There are days you spend eight hours standing at a lathe though. Also if you decide to learn metalworking because lathes chew people up if they get caught.
@ledocteur7701
7 ай бұрын
@@carloshernandez2561 I have seen a fair share of industrial machinery, but lathes remain the most worthy of the sign "this machine does not know the difference between metal and flesh, nor does it care." a lathe will not only kill you, it will hurt during the entire process.
@carloshernandez2561
7 ай бұрын
@@ledocteur7701 man that russian lathe acciden lives in my head.
Always appreciate the monumental amount of effort you must put into making these vids. 👍
I saw "UV Protection Amulet" and came over here all ready to be outraged by some more pseudoscientific bullcrap about the "energy of the universe" or something. Turns out it's actually a nice sensible sensor that should be a genuine product on the market. Honestly, you should market this.
"It needs one more thing"... honestly thought it would get an inscription of sorts, or maybe just a nice way of presenting it as a gift, but a MANUAL?! Geniously funny, and nicely done too.
Welcome back Mitxela, so glad to see you once again ;)
This an amazing little project! Art, science, machining and code, you've got it all!
Great project! Thanks for the research with that sensor.. I got some of those here and would have expected that they actually work. I'm asking myself if the extended UV-A its measuring could be taken to extrapolate and estimate an UV-B reading. Did you consider giving the little handle longer shaft and cutting a thread? I can imaging simple M2 thread cutters would work here, or am I just overestimating the size of that? Another way could be to drill trough and solder from inside letting it flow to the outside.
@mitxela
2 жыл бұрын
Hi! I think it's still a good sensor, if we only care about direct sunlight, I just wish the documentation was better and that the calibration numbers were correct. The "proper" way to solder the join would be to use a high-temperature solder with borax flux, which doesn't go runny when it's heated. Then you can just place a small amount of solder on the join before starting, and it'll wick into place under the blowtorch. That way shouldn't even need a hole or divot in the brass, the hard solder on its own would be strong enough.
@bitluni
2 жыл бұрын
@@mitxela if it wasn't a present I'd probably use hot glue 😂
@TheRailroad99
2 жыл бұрын
sadly the bad documentation is something a lot of these integrated (I2C/SPI) sensors have in common. I recently worked with a Bosch BME680 air quality sensor and I could not get the humidity reading to work properly. Maybe the batch I got (tested 5 units) was bad, or I have overseen something, but I could not get that register to work, even if the config registers are set the same way as the datasheet tells me to do... Same with a lot of these sensors. Sometimes they just don't work correctly.
I made a conceptually similar amulet several years ago, but no where near as elegant or attractive. I also recently made a UV detector for similar reasons, but I didn't think to make it look nice. This is why I'm subscribed to you, and not the reverse.
And here i thought KZread is again going braindead and suggesting new-age WooWoo like wireless ESD-armbands, but this was a nice idea and project.
"i'd like to think that there are a few jewelers watching and cringing so hard that their teeth melt" Me, a watchmaker: writhing in pain
This is one if my favourite projects on youtube. Blending art and circuits is what I am all about! Thank you for sharing
This looked like an insane amount of work and I can't believe you finished it in a 2 week deadline! Amazing!
I am very amazed by your skills and creativity! This project combines so many disciplines and you pretty much master them all... electronics design, PC Layout, science (well, at least a bit), software (I would have written the whole thing in C, but assembler is always cool!), metal work etc. I am glad that I am subscribed to your channel, it really is a gem on KZread. Please don't change your format, I won't care if it takes months for a single video if it amazes me as much as this one.
please tell me youre making more videos like this... this brought me a joy and peace that other channels simply do not have
Its amazing watching the whole thing through, with in the final assembly and ad the CR2032 goes in you realise how massive the battery looks, and the whole sense of scale is finally put into perspective. This is some incredible craftsmanship.
This is the weirdest ASMR I've ever watched. But it works.
Whenever I watch a mitxela video I go through a sequence of emotions. Fascination, lamenting that they're not more popular and finally acceptance that such sophisticated beauty is probably beyond the grasp of most people. I hope he appreciates that he brings so much joy to the few who don't find much of it in more popular content.
Hand soldering all these without a hot plate is some truly masochistic stuff
Yooooo mitxela! Wow, I can't believe it's been 7 months, so happy to see another upload!
Some of the best engineering contents ever found on KZread. Final product = piece of art😮
It would have taken me 2 weeks just to plan just the electronics portion of the project. The fact that you did the whole thing in 2 weeks is mind boggling. Also great looking amulet. I particularly like the fact that you went with the same color LEDs. Many would be tempted to mix the colors, but your choice of just yellow/orange is a perfect match for the amulet. Nice sense of style!
Love how deep this goes into the subject. Both the machining and the electronics. I'd love for you to post more often but in the end: quality > quantity.
I'm pretty new to this channel, so stop me if you've heard this before, but I can't get over how lovely your voice is. The content is great too, but I could (and let's be honest, probably will) sit here for hours just listening.
That is a gorgeous piece of industrial design. The fact that it requires pretty much every skill that I've personally built over a lifetime (machining materials, electronics design, soldering, software engineering, jewelry design...) pretty much puts this right into my wheelhouse, and now I want to build my own... After all, being a redhead, the sun is my natural enemy. Not one like that, however, I would loathe to copy someone's designs outright. I need to build one that has a similar function, but goes about it a completely unique way :) Unfortunately, watching this video has possibly created a bias, so I have to try to do things in a different way :D
I followed your instructions, built the thing, and wore it all day. Still got a sunburn.
Happy to see the manual isn’t overlooked. It’s the icing on the cake for me.
What a wonderful entertaining project! Your work kept me mesmerised for the entire duration. I hope your friend enjoys her amulet as much as I enjoyed watching you make it.
This is a great video. Nice mix of a bunch of different disiplines.
I have a high appreciation for your aversion to copy-paste code and wanting to source proper information.
Noone: Noone ever: Not even Satan: Mitxela: ...much easier in assembly
As someone who has no substantial knowledge of the kind of work being done in the video, I’m impressed with how interesting and engaging I found it! My attention span for most KZread videos tends to be around 5 to 10 minutes, but I was never bored while watching this. I also found the narration both funny and informative! Really glad I discovered this channel, keep up the great work ^^
don't worry about how long it takes per video, these are absolutely brilliant!
You have another fan. I was hooked by your volumetric display, but this is beautiful too. My destiny finds me back in England, and now your metalworking lessons are another reason to go. Thank you for the inspiration and ingenuity.
I have no idea on how or why I came upon this channel in the past. But gosh darn am I glad past me found it ! Thank you for your content !
I love the idea of UV detection amulet. You did amazing job with it.
You are amazing, and don’t forget it! Absolutely blown away by your intelligence, wit, and skill. I never ever leave comments but I was truly compelled to do so after watching ❤️
That funky retro 8-bit into was an absolute banger holy shit I was transported to the summer, late 80's, and after using the 16-bit extension to the ISA bus to allow me the choice for an IRQ (10) and DMA (0)m channel...I reboot with crossed fingers and close my eyes as I step into a new age...the dawn of "Multimedia" rises, and a stanky, raw MIDI funky jazz/blues tune plays in 44.1 kHz mono from my Personal Computer. Holy crap, this feels like we are living in the future. Incredible. 🤟🤟🤟🔊🔊
35:51 the "no offense to undergraduates" is the biggest backhanded diss on the documentation
I really enjoy these long form project videos give me lots of ideas of things I want to try
Holy crap, I watched through the entire thing... It was so well edited with so many great and satisfying shots that i didn't even see the time pass!
Watching this was extremely painful, and I enjoyed every second
i know nothing about eletronics, pcbs, machining and doing creative art projects. but i love this channel now. nice explanation on details :D thanks for the quality content. the pcb melt video was one of my favorites, looks like an art documentary about evolution of pcbs and ends on shroon trip (sorry, english is not my native language). edit.. 8:43 🤣😂
Metals in my hands: hard Metals in this video: SOAP
it feels like its been years, but when I check its only been 7 months. 2021 moment
Hey, it's me your friend thank you for gift I send you my address to ship./s This is an awesome project! Very inspiring to make my own gadget (probably 3D printed instead of machined though.) Maybe something to read ambient noise to notify me of when it's dangerously loud since I work with tools a lot. Also, thanks for sharing your frustrations with the "UVB" meter! It's killer when parts blatantly lie about what they can do! Reminds me a lot of when I was hunting for a very precise RH meter, only to find that except for expensive fogged-mirror sensors, basically nothing can get better than ±3-5%.
32:19 When you include the circle (and use it with this context) its called a pentacle. basically, the symbol of protection you are talking about is the pentacle, which is a circle around a pentagram (the pentagram is just the star). Its the inverted pentacle that is associated with evil practices because of the belief that inverting symbols of protection or symbols of good would also invert their meaning. this has clashed with other ancient believes though, so its not 100%. For example, the inverted cross is used to symbolize an inverted messiah (evil messiah) but Catholics also use an inverted cross to represent St. Peter and humbleness because St Peter was crucified upside down on request that he not die the same way as Jesus. Basically, any Catholic who has studied religion for more than 5 minutes knows that a pentacle is just an ancient symbol of protection, generic faith, balance and its the inverted pentacle that is meant to portray the opposite of those things. Also it its not clear, an inverted pentacle has one point facing directly down, while the traditional pentacle has one point facing directly up. why is that? i have no idea.
THIS WAS EXTREAMLY ENTERTAINING AND FUNNY. I HAD MANY LAUGHS TO GIVE AND MANY SMILES TO BEAM TOWARDS YOU ALL. I HOPE YOUR FAMILY HAS A VERY NICE CHRISTMAS
Keep up with the Brasso, and you can essentially get a mirror. I was down at Paris Island years ago, and I can not take full responsibility for it but, our trash can could be used to shave out of, that is with a straight razor. And they still used it periodically to “wake us up, so dented and shiny. I remember smelling Brasso on my hands, for a while after I left.
NICE! I've been slowly working on a project like this in my free time for fun using organic material as a resister with copper coils for a sort of manipulative electromagnet. There's so much possibility with this sort of thing. the golden age of wizardry is upon us.
@Hellsong89
2 жыл бұрын
Science, when you dont understand it, it becomes magic, hence those two are the same thing.
I can't help but feel like in the next few decades the things he makes are going to become collectors items. Regardless of obsolescence. These devices are such delightful intersection of art and science.
video: [sound of metal screeching as it's being shaved off] auto-captions: "[Music]"
When you said "cringing so hard their teeth melt" I made a strange involuntary laugh/snort sound.
"Of course, why build one when you can build two for twice the price?" Damn, this makes me want to go rewatch the movie Contact again
Had a hard time figuring out what to watch tonight. This is exactly what I needed. Id love to have one of these, maybe I need to visit a hackerspace😅
This was really great, I like your storytelling. It's fantastic how you show every little detail to your project. I'm more like the software guy but you did a little motivation in trying out getting hands on hardware :D
as a chemist I find it cute how you plated the brass with so little gold. I am used to obvious changes.
I've been thinking of making a protective multi-sensor (UV, CO2/pollution, hidden camera detection, etc...)
Nice project! I see two possible easy improvements: - high brighness green LEDs - drop of a clear epoxy over the circuit board to make it a bit more protected, but still thin enough to not cover the sensor
I watched the whole thing! BRavo. I Dont understand a single thing about IC behavior and code setting or reading. But it was fun to watch. Your narration's are awesome!
Being unfamiliar with your channel, when this video popped into my recommendations and I read the title, I thought I was going to be dealing with either pseudoscience or a debunking video. Pleasantly surprised at a well grounded project video involving both machining and microelectronics.
This is Technomancy: the combination of Magick and Technology, or the performance of Magick through the use of technology.
Wonderful video, 4 months of editing was obviously worth it
3:58 "I don't have any tools to measure inside diameter" proceeds to use a tool he made with the express purpose of measuring an inner diameter
This guy does it all. I’m still stuck at how to even program any at tiny
Apparently the pentagram also represents the 5 senses, so that seems fitting since its a sensor
the moment you showed the tiny brass threaded lid you blew my mind!
46:09 have you ever tried using solder paste out of a fine syringe? I find it quite nice for small projects like this
The precision of this large lathe is very impressive!
"I'm just eyeballing it with a straightedge, but I am eyeballing it *carefully*" hahaha
"mixing C and Assembly" I started hitting my head off a wall for you when you said that
My brain tricked me into watching the full video before ever realizing it was 52 minutes long
The section on the UV chip gave me flash backs to a driver I wrote for an accelerometer chip. spent weeks looking at partial documentation, and undocumented code.
I knew I’d enjoy this video, but I didn’t realize just how much I would lol. Loved every second of it! Incredibly creative.
I feel that „oh gooood“ panic when it comes to threading. I did an internship where I did lathe work a bunch and I always hated threading. I think I legitimately got nightmares about missing some crucial step and accidentally ruining the workpiece or break a tool.
The Bob Ross of electronic engineering. Just beautiful.
Good job. I already have a few suggestions on how to make it better, but I'll keep them for myself since nobody asked. 😀
24:34 "I'd like to think there are a few jewellers watching, and cringing so hard that their teeth melt" I can't believe you've called me out like this... (also solder likes to follow heat, so if you use a flame, try heating from the opposite side next time and it will be less likely to blob on the side! :D )
Awesome as always :) I wonder if there's a sensor that has spectral range between 200 and 280nm (low UV-C?)? I'm very interested in detecting germicidal capabilities of UV-C lamps and debunk those that are sold as if they were within that range?
OMG, the parting tool! Anyone who's done it knows this. Earned you a sub. Your skills are scary my friend. Keep up the great work.
What a cool and useful amulet! Loved this project
Great project! A nice way to spice them up is explaining things that may not be universal for everyone. I thought about this when you spoke about the DRO that for a machinist is super obvious but maybe not for everyone.
This might actually be pretty useful for someone with an allergy to sunlight, if it was a little more sensitive
@Misha-dr9rh
2 жыл бұрын
Glad to see that the League of Legends community is getting more attention.
I learned so much from this. And totally understand the idea of small project that... kinda got out of hand. Great work!
That's really interesting. Why do you cover the lathe's bed to keep the abrasive dust away? Will it break or deteriorate the lathe somehow?
@Nimphious
2 жыл бұрын
The reason the abrasives work in the first place is because of the hardness difference between the abrasive medium and the material you're working. It's not indestructible though, so as you work with it small pieces of abrasive will break off and fall into the ways of the lathe. This is problematic because that's a precision ground bearing surface that the lathe parts move across, and if there is abrasive powder there (which is harder than the lathe parts) then they will abrade the bearing surface and ruin the precise flatness, which will cause problems like the toolpost or tailstock carriages binding up while you're trying to move them back and forth. The reason most metal chips finding their way down there isn't a big problem is because the softer worked metals are typically not harder than the surface of the ways (though when the metals *are* harder, similar precautions need to be taken.)
@cheater00
2 жыл бұрын
@@Nimphious thank you, that's very interesting! What metals should one watch out for?
I remember having issues with Vishay parts. And I also learned very much to always check the data sheets and read up on parts before I purchase any components, especially if something is marked as obsolete.
Trivia: outside of the Earth's atmosphere, the true color of the sun is a shade of peachy pink. You'll never actually see it without looking through a tinted visor of some kind or via a camera which has white balance adjustments designed for normal Earth conditions, so the "true" color is not apparent.
The amount of effort you put into this is sbsolutely astonishing- fantastic work!
Only by the end of the video did I realize how trully tiny this creation is. Extremely impressive. I just thought the battery was really big for some reason
Easiest way to tell how well you've polished it, is to see how quickly it gets smeared with fingerprints.
All most hypnotic watching an automatic machine that knows the exactly what it's to do.