Using the MFA to Measure Corrado G60 Boost

Автокөліктер мен көлік құралдары

I demonstrate how to measure the boost your Corrado G60 G-ladder supercharger is producing by utilizing the onboard Volkswagen MFA these cars were equipped with.
To activate the MFA boost-test readout:
1. Turn on the ignition
2. Turn MFA to position "2"
3. Hold in button at end of stalk
4. Turn off the ignition
5. Start engine
6. Release button at end of stalk
7. Press button at end of stalk once
NOTES:
The test is best done in 3rd or 4th gear at redline (6200rpm).
MFA = PSI
200 = -23.7
400 = -17.8
600 = -11.9
800 = -5.9
1000 = 0 (Atmospheric pressure)
1200 = 2.9 (Major boost leak)
1400 = 5.8 (Charger is in poor condition)
1600 = 8.7 (Charger would benefit from new apex strips)
1800 = 11.6 (Good for stock pulley)
2000 = 14.5 (Good for 68mm pulley on stock charger)
2200 = 17.4 (Good for 68mm pulley on heavily ported charger)

Пікірлер: 17

  • @Clean97gti
    @Clean97gtiАй бұрын

    The startup chime brought me back to my old 97 GTI. My then-GF thought I was a total dork but I loved the VW song.

  • @ShinyFastLoud

    @ShinyFastLoud

    Ай бұрын

    I know exactly what you are talking about!

  • @G40rocket
    @G40rocket Жыл бұрын

    Thank you for the awesome video. It helped me with my Corrado G60 in year 2022. 3 gear at 6000 rpm it measure 1800 so I guess that is good health.

  • @ShinyFastLoud

    @ShinyFastLoud

    Жыл бұрын

    Glad it helped

  • @tonysantos8076
    @tonysantos80763 ай бұрын

    Thanks, always learning.

  • @ShinyFastLoud

    @ShinyFastLoud

    3 ай бұрын

    you are welcome

  • @cryptoshae5875
    @cryptoshae58752 жыл бұрын

    Thansk for the tip can't wait to get my non running forged internals corrado running

  • @ShinyFastLoud

    @ShinyFastLoud

    2 жыл бұрын

    good luck!

  • @cryptoshae5875

    @cryptoshae5875

    2 жыл бұрын

    @@ShinyFastLoud thanks I'll come back and let you know how installing a new pump goes

  • @Robis_Grigoris
    @Robis_Grigoris5 ай бұрын

    On a MOTOMETER dashboard you have to cycle the ignition 2 times

  • @ShinyFastLoud

    @ShinyFastLoud

    5 ай бұрын

    good info

  • @XarlioG60
    @XarlioG60 Жыл бұрын

    Readings at 2:39

  • @ShinyFastLoud

    @ShinyFastLoud

    Жыл бұрын

    'Test sum of programmed bytes' and I know C10 is normal......I have no idea what the error means. I would check all the other values as you cycle through the other MFA settings to see if any are missing.

  • @XarlioG60
    @XarlioG60 Жыл бұрын

    What does it mean "C10"? I got "CError"

  • @ShinyFastLoud

    @ShinyFastLoud

    Жыл бұрын

    From what I read it is the 'Test sum of programmed bytes'

  • @jeffvandeven7728
    @jeffvandeven7728 Жыл бұрын

    Are there any cool features for the VR6 like this?

  • @ShinyFastLoud

    @ShinyFastLoud

    Жыл бұрын

    Check out this link….. gti-vr6.net/wiki/index.php?title=Tricks_you_can_do_with_the_VR6%27s_MFA!

Келесі