Not sure what the PL tone (CTCSS) is for a repeater? Just use the tone scanning feature to find it and you are ready to program any new repeater you come across.
Жүктеу.....
Пікірлер: 111
@fatcattowing89902 жыл бұрын
This was SO FREEKING EASY!!!!! (way better) than other videos on here that go on & on blah blah and then get NOTHING!!! well done Thanky you
@Teknofobe
Жыл бұрын
Agreed! Most content maker's assume uv passed at least the first two test's? This as simple & to the point. As a monitor only. This help's my interesting hobby become important enough to pass my time soon. Gratitude sir! I doff my hat to u!
@toeywerni8718
10 ай бұрын
ตัวนี้ราคาตัวกี่บาทครับของสีคํา
@hicksvilleshick Жыл бұрын
Thanks to you, I finally understand how to get the scan ctcss function to work. No shortage of folks saying you can do it, but no real directions for noobs like me. Thank you!
@Warthunderguy78
4 күн бұрын
So I've got this and I tried it didn't do anything. When you do this do you have to hold down the transmit button then
@dustinmeier9753 Жыл бұрын
I didn’t know these could do that. 🤯
@MoritzRohwold79Blankenberg
8 ай бұрын
Even did' Not know
@ScottyD Жыл бұрын
A great feature in this radio that I use when traveling... I do a scan of frequencies until I get activity, then if I know it is more than likely a repeater, determine what the CTCSS is for the repeater with this quick scan as well.
@Tingoat10 ай бұрын
For all of the people that hate those radios, they should have a lot of videos about them
@lukepippin47819 ай бұрын
I’ve been struggling to figure out why my FRS radio wouldn’t receive anything from any other radio, even though it would send just fine. With this I figured out why. Now I can list the channels and their related CTCSS frequencies. Granted you’re not supposed to use a ham radio on FRS, but it allows me to use all my radios together in an emergency. Thanks!
@petevannuys56422 ай бұрын
Ton of research in radio hobby craft ideas 💡❤
@gooutsideeveryday20173 жыл бұрын
Wow that's an excellent tip. Thank you very much.
@ralphjohnson8775 Жыл бұрын
I knew this the first day I had my U v5r Read the manual people You can also use the volume nob As a disassembly tool For the ring Nut under the antenna.
@rickramirez7710
6 ай бұрын
You are so Amazing!😅😅
@GunsAndRotts3 ай бұрын
I need help to set mine up i have no clue what I'm doing. Newbie
@1959jimbob Жыл бұрын
Ok for us newbies, can you tell us what buttones you are pressing? Please... your thugmb is blocking which buttons are being pressed. I have a GT5r and I can NOT figure it out.
@paulricelli5520
10 ай бұрын
🟥🟥🟥 Im a newbie too. This pickle smacker 🥒🥒🥒 didn't show me sh!t. Some verbal explanation would've helped. They ASSUME we know what they're doing.
@lukepippin4781
9 ай бұрын
KZread says someone replied, but I can’t see it, so here it is. Set to active frequency. Press “Menu” Go to option 11, “R-CTCS”(s) Press “Menu” Press “^” key to start at the lowest CTCSS frequency Press “Menu” to select that frequency and turn R-CTCSS on. You MUST do this before it will scan. If you do not see “CT” on the left, CTCSS is off and will not scan despite being in the CTCSS frequency selection. With CTCSS now on; Press Menu to renter CTCSS frequency selection. Press “*/SCAN” Wait for transmission on active frequency and allow the radio to scan for R-CTCSS. It sounds rather complicated typed out, but in practice it’s much simpler. Hope this helped!
@xSikks18 күн бұрын
Had these things for 10 years and didnt know this.
@truckerdaddy-akajohninqueb47933 жыл бұрын
So you set it to 67 but it is still capable of detecting whatever tone another radio is using?
@the1spyderryder
2 жыл бұрын
67 HZ is the lowest CTCSS frequency, and it scans up when it is receiving.
@the1spyderryder2 жыл бұрын
Now, that is very useful! What other things do you have up your sleve?
@warzone75713 жыл бұрын
So this future i can scan for ctcss for any reapeter transmitting in my area..????
@j69chevelle
3 жыл бұрын
Yep
@GModBMXerАй бұрын
New to this. What's the point? Is it to see who is transmitting on a repeater to find out the ctcss tone for it?
@bonedry_barista56343 жыл бұрын
I can hear people all day on my boefeng 5r but i feel like noone can hear me ?
@j69chevelle
3 жыл бұрын
Maybe you are not programming that repeater correctly
@drdabber710
2 жыл бұрын
Probably need an offset and a ctcss tone
@357supermag11
Жыл бұрын
Where I live my ht could not activate the closest repeter 22 miles away without using a yagi type antanna. Using an arrow antana I'm able to hit the repeter 90% of the time.
@Wtfu2
Жыл бұрын
Its all in your head.
@Zigoritos
11 ай бұрын
Try selecting the same R-CTCS (or DCS) frequency in T-CTCS
@rickramirez77106 ай бұрын
Newbie question: what is this scan for? Feel free to be detailed. TIA.
@milangacic40433 жыл бұрын
So basicly if someone using private codes to stop other peoples interfeing, if someone on the other side have tone scan option on radio they can still interfire, so what is the point of this tones?
@j69chevelle
3 жыл бұрын
Unless you're using digital modes and talk groups
@neildavidson7809
3 жыл бұрын
The point of tones are to block out other people's conversations and only hear another radio which you have programmed with tone.
@Tsch63734 ай бұрын
Do I use the repeater's offset frequency when I scan for its PL?
@emoboy55916 ай бұрын
so did you hit the exit button and PTT at the same time?
@nordicwolf8808 Жыл бұрын
I am trying to do it on Yaesu FT65-R. Does anyone know if tone scan is even possible on Ft65-r? Thanks in advance😊
@hcfirefighter82 Жыл бұрын
I used this with my UV-5R but I have an issue. I found the tone and can transmit from my other radio, but when I try to transmit from my UV-5R I get nothing. Any suggestions?
@mr_deadshot2217
Жыл бұрын
You probably scanned and found a ctcss tone in the r-ctcs menu option but you still need to put that same tone in the menu option t-ctcs
@zackomiecinski92758 ай бұрын
Does this bypass QT on kenwood radios?
@vouzenthal Жыл бұрын
You only need the handheld device for this or the statiom on the left is connected to it ?
@lukepippin4781
9 ай бұрын
I was able to find the CTCSS frequencies for one of my cheap FRS radios using only the handheld. The station on the left is simply a stand in for any other radio.
@emrilbennett87046 ай бұрын
Cool device!
@elsavelacion47294 жыл бұрын
where is scan button?
@j69chevelle
4 жыл бұрын
The "*" button. Top right.
@franciscotopete54307 ай бұрын
I can see that you're in Orcutt CA. Im here in SM.
@PatonMacD Жыл бұрын
this does not work for me :( either on UV-5R5 or UV-5RX3
@DanielBerzinskas Жыл бұрын
NICE! you have 1.25M! I do have it on my UV-5R MK4!
@TheEzralo6 ай бұрын
Hello I have a uv5R and a Motorola crp 7350E radios but I can only listen to the Motorola on frequencie ,464.51125 Any help to fix transmission
@Warthunderguy782 күн бұрын
So I'm doing the very something and it's not doing a thing. Very frustrating I'm sure it's something I'm doing wrong
@davonnymorrison86966 ай бұрын
So what did that do? Is that a frequency getting traffic?
@louismccoy90666 ай бұрын
It won’t work on mine holding scan just makes ct flash on and off. What am I doing wrong?
@johnmknox Жыл бұрын
Doesn't seem to work on my radio although it is not clear how you get it to scan instead of reverting to the previous frequencies and if you are doing this in channel or frequency mode?
@HarryHamsterChannel
Жыл бұрын
Need a very strong receive signal.
@-pyrosef-
11 ай бұрын
It's not available in newer Uv 5r models the firmware changes and removed the ctcss scan feature.. I forget the firmware version that supports it
@lukepippin4781
9 ай бұрын
I had that problem and found that it doesn’t work in channel mode, so that could be your issue.
@hatry48039 ай бұрын
Very helpfull
@W5KJD7 ай бұрын
My Baofeng UV-5R will not do that, why?
@nickmakroglous61369 ай бұрын
Is that the pro version?
@RaisedRightFl4 ай бұрын
If that channel doesn't work do I keep scanning different channels? I'm having trouble
@mortsdans
3 ай бұрын
You have to find a channel that someone is transmitting on first. Look up frequencies near you online or do what this guy did and use another radio to transmit.
@reecephillips9867 Жыл бұрын
Mine says DCS. what does that mean
@grahamwardandcd15946 ай бұрын
What's that setting for
@qthsul774425 күн бұрын
Funciona para DCS ?
@waynejohn25674 ай бұрын
Mine is just scanning though for 5 minutes now why is that ?
@jrcomet5 жыл бұрын
I'll try, but at the beginnig no work.. you must to push (SCAN BUTTON) twice and BINGO!!!
@ismailylmaz4860 Жыл бұрын
Hello . I m. Wondering. İs this radio listen about 110---130mhz
@johnmknox
Жыл бұрын
No. You can program it to go that low but it won't receive anything, especially airband because all airband is 99% AM and this is FM.
@Tsch63734 ай бұрын
Thank you so much for sharing this! There's a repeater a mile away from me but has very little traffic. It's PL tones are unlisted. If it ever transmits...
@johnmusso55267 ай бұрын
Does that feature show you what you are running your Ham base on?
@fabiofsfernandes10134 жыл бұрын
👍
@ianblank8 ай бұрын
Then what? Does a repeater act like I have more range?
@KE8ODY-WV-Ares-Ham-Dad-3O43 ай бұрын
When I hit exit mine just exits
@StevenSeagul783 Жыл бұрын
I’m not the sharpest tool in the shed and I got my self a uv5r. I don’t have a license to use it but I want to tune into a local frequency to hear what’s going on but there is more to it than just frequency’s. There is tones and all this other stuff my mind can’t even process. Every one uses big technical mathy words I get lost quick when watching little tutorials on ham radios. What am I missing. I hat am I doing wrong?
@generalneyland4005
Жыл бұрын
you don't need a "license" to use your radio, stop believing this nonsense
@MacMetal215
Жыл бұрын
You only need a license to transmit. You can listen all you want. Best to find uncommon channels if you want to talk to other radios
@jonsmith60007 ай бұрын
Some reason mines not doing this can anyone please help?
@PennsylvaniaEAS2 жыл бұрын
I just got this radio can anyone explain what this is
@j69chevelle
2 жыл бұрын
It is scan for PL / CTCSS tones being used on the tuned frequency. Use case may be listening to the input frequency of a repeater to identify its tone. Once the tone is known you can program a channel for that repeater.
@PennsylvaniaEAS
2 жыл бұрын
@@j69chevelle ah. I've seen input frequencies and tones in radio reference. Do I need any other equipment to scan or do I just need my UV-5R Also I have the European model so I can't use the PTT button unless I'm on a frequency I'm permitted to be on, or else I would be TXing illegally
@KI5BEZ3 жыл бұрын
Cool thanks for the tip.
@ismailarda398
3 жыл бұрын
Poiis
@59plexi5 ай бұрын
i dont understand what you are doing?
@RLPressley5 жыл бұрын
I have a UV-5RHP. I'm following these steps exactly, but I never see the "CT" on the left of the LCD Screen? I never scans. Am I missing something?
@j69chevelle
5 жыл бұрын
Try these steps in Frequency Mode while monitoring the repeater receive frequency. Once you select R-CTCSS move to an arbitrary value, confirm and reselect R-CTCSS. You have to press the SCAN button while in the R-CTCSS tone selection menu and at that point you should see the flashing CT if your model has the Tone Scan function.
@nazranzafran3807
2 жыл бұрын
@@j69chevelle how about uv82
@j69chevelle
2 жыл бұрын
@@nazranzafran3807 not sure. It might not have the CTCSS scan feature.
@originaLkomatoast10 ай бұрын
I don't understand what's going on here.
@lukepippin4781
9 ай бұрын
He’s turning on R-CTCSS by selecting the lowest frequency, then going back to the frequency selection and pressing “SCAN”. Then when the radio receives a transmission (which he demonstrates using the other radio) it will automatically scan for the receiving CTCSS frequency till it finds it or the transmission stops. When the transmission continues, it will continue scanning.
@nancytomlin40544 жыл бұрын
Hey
@wakotte_tv Жыл бұрын
日本でも使えればいいのになぁー
@aestheticgirl36094 жыл бұрын
How i scan transmit ctcss code?
@neildavidson7809
3 жыл бұрын
He just showed you bro
@lukepippin4781
9 ай бұрын
@@neildavidson7809he showed how to scan for the receiving CTCSS frequency. In simplex, this will get you both frequencies because they will be the same. I think she’s looking for a way to find the transmit code for repeaters and such.
@anthonycardenas91772 жыл бұрын
GEE! NO IDEA WHAT BUTTONS you pushed because a thumb was in the way, but I KNOW your mike works so why not "SAY what you are doing"? How about a 'do-over' because your PL SCAN method appears to be what so MANY of us need! I didn't leave a "Thumbs Down" as many others obviously did, but confess I was very temped. ANY ideas what Baofeng Models this works with?
@j69chevelle
2 жыл бұрын
Press: MENU>SCROLL to Menu 11> MENU>UP ARROW>MENU>SCAN
@hassann.6699
2 жыл бұрын
@@j69chevelle I followed your steps exactly and as I press the scan button I hear a beep and nothing happens. I have a TidRadio model TD-UV5r. What would you recommend I do?
@j69chevelle
2 жыл бұрын
@@hassann.6699 I have a BTech UV-5x3. Can't speak for this feature being available on other models.
@lukepippin4781
9 ай бұрын
@@hassann.6699nothing happens until you receive a transmission. That’s all I can figure that would be the problem.
@DARTHDANSAN2 жыл бұрын
What exactly happened or what’s the big deal . I only how todo I listen to NOAA radio weather channel
@j69chevelle
2 жыл бұрын
To use repeaters you need to broadcast a special tone in order to have your signal rebroadcast. This feature finds that tone for you rather than having to look it up or find it even if it's not published.
Пікірлер: 111
This was SO FREEKING EASY!!!!! (way better) than other videos on here that go on & on blah blah and then get NOTHING!!! well done Thanky you
@Teknofobe
Жыл бұрын
Agreed! Most content maker's assume uv passed at least the first two test's? This as simple & to the point. As a monitor only. This help's my interesting hobby become important enough to pass my time soon. Gratitude sir! I doff my hat to u!
@toeywerni8718
10 ай бұрын
ตัวนี้ราคาตัวกี่บาทครับของสีคํา
Thanks to you, I finally understand how to get the scan ctcss function to work. No shortage of folks saying you can do it, but no real directions for noobs like me. Thank you!
@Warthunderguy78
4 күн бұрын
So I've got this and I tried it didn't do anything. When you do this do you have to hold down the transmit button then
I didn’t know these could do that. 🤯
@MoritzRohwold79Blankenberg
8 ай бұрын
Even did' Not know
A great feature in this radio that I use when traveling... I do a scan of frequencies until I get activity, then if I know it is more than likely a repeater, determine what the CTCSS is for the repeater with this quick scan as well.
For all of the people that hate those radios, they should have a lot of videos about them
I’ve been struggling to figure out why my FRS radio wouldn’t receive anything from any other radio, even though it would send just fine. With this I figured out why. Now I can list the channels and their related CTCSS frequencies. Granted you’re not supposed to use a ham radio on FRS, but it allows me to use all my radios together in an emergency. Thanks!
Ton of research in radio hobby craft ideas 💡❤
Wow that's an excellent tip. Thank you very much.
I knew this the first day I had my U v5r Read the manual people You can also use the volume nob As a disassembly tool For the ring Nut under the antenna.
@rickramirez7710
6 ай бұрын
You are so Amazing!😅😅
I need help to set mine up i have no clue what I'm doing. Newbie
Ok for us newbies, can you tell us what buttones you are pressing? Please... your thugmb is blocking which buttons are being pressed. I have a GT5r and I can NOT figure it out.
@paulricelli5520
10 ай бұрын
🟥🟥🟥 Im a newbie too. This pickle smacker 🥒🥒🥒 didn't show me sh!t. Some verbal explanation would've helped. They ASSUME we know what they're doing.
@lukepippin4781
9 ай бұрын
KZread says someone replied, but I can’t see it, so here it is. Set to active frequency. Press “Menu” Go to option 11, “R-CTCS”(s) Press “Menu” Press “^” key to start at the lowest CTCSS frequency Press “Menu” to select that frequency and turn R-CTCSS on. You MUST do this before it will scan. If you do not see “CT” on the left, CTCSS is off and will not scan despite being in the CTCSS frequency selection. With CTCSS now on; Press Menu to renter CTCSS frequency selection. Press “*/SCAN” Wait for transmission on active frequency and allow the radio to scan for R-CTCSS. It sounds rather complicated typed out, but in practice it’s much simpler. Hope this helped!
Had these things for 10 years and didnt know this.
So you set it to 67 but it is still capable of detecting whatever tone another radio is using?
@the1spyderryder
2 жыл бұрын
67 HZ is the lowest CTCSS frequency, and it scans up when it is receiving.
Now, that is very useful! What other things do you have up your sleve?
So this future i can scan for ctcss for any reapeter transmitting in my area..????
@j69chevelle
3 жыл бұрын
Yep
New to this. What's the point? Is it to see who is transmitting on a repeater to find out the ctcss tone for it?
I can hear people all day on my boefeng 5r but i feel like noone can hear me ?
@j69chevelle
3 жыл бұрын
Maybe you are not programming that repeater correctly
@drdabber710
2 жыл бұрын
Probably need an offset and a ctcss tone
@357supermag11
Жыл бұрын
Where I live my ht could not activate the closest repeter 22 miles away without using a yagi type antanna. Using an arrow antana I'm able to hit the repeter 90% of the time.
@Wtfu2
Жыл бұрын
Its all in your head.
@Zigoritos
11 ай бұрын
Try selecting the same R-CTCS (or DCS) frequency in T-CTCS
Newbie question: what is this scan for? Feel free to be detailed. TIA.
So basicly if someone using private codes to stop other peoples interfeing, if someone on the other side have tone scan option on radio they can still interfire, so what is the point of this tones?
@j69chevelle
3 жыл бұрын
Unless you're using digital modes and talk groups
@neildavidson7809
3 жыл бұрын
The point of tones are to block out other people's conversations and only hear another radio which you have programmed with tone.
Do I use the repeater's offset frequency when I scan for its PL?
so did you hit the exit button and PTT at the same time?
I am trying to do it on Yaesu FT65-R. Does anyone know if tone scan is even possible on Ft65-r? Thanks in advance😊
I used this with my UV-5R but I have an issue. I found the tone and can transmit from my other radio, but when I try to transmit from my UV-5R I get nothing. Any suggestions?
@mr_deadshot2217
Жыл бұрын
You probably scanned and found a ctcss tone in the r-ctcs menu option but you still need to put that same tone in the menu option t-ctcs
Does this bypass QT on kenwood radios?
You only need the handheld device for this or the statiom on the left is connected to it ?
@lukepippin4781
9 ай бұрын
I was able to find the CTCSS frequencies for one of my cheap FRS radios using only the handheld. The station on the left is simply a stand in for any other radio.
Cool device!
where is scan button?
@j69chevelle
4 жыл бұрын
The "*" button. Top right.
I can see that you're in Orcutt CA. Im here in SM.
this does not work for me :( either on UV-5R5 or UV-5RX3
NICE! you have 1.25M! I do have it on my UV-5R MK4!
Hello I have a uv5R and a Motorola crp 7350E radios but I can only listen to the Motorola on frequencie ,464.51125 Any help to fix transmission
So I'm doing the very something and it's not doing a thing. Very frustrating I'm sure it's something I'm doing wrong
So what did that do? Is that a frequency getting traffic?
It won’t work on mine holding scan just makes ct flash on and off. What am I doing wrong?
Doesn't seem to work on my radio although it is not clear how you get it to scan instead of reverting to the previous frequencies and if you are doing this in channel or frequency mode?
@HarryHamsterChannel
Жыл бұрын
Need a very strong receive signal.
@-pyrosef-
11 ай бұрын
It's not available in newer Uv 5r models the firmware changes and removed the ctcss scan feature.. I forget the firmware version that supports it
@lukepippin4781
9 ай бұрын
I had that problem and found that it doesn’t work in channel mode, so that could be your issue.
Very helpfull
My Baofeng UV-5R will not do that, why?
Is that the pro version?
If that channel doesn't work do I keep scanning different channels? I'm having trouble
@mortsdans
3 ай бұрын
You have to find a channel that someone is transmitting on first. Look up frequencies near you online or do what this guy did and use another radio to transmit.
Mine says DCS. what does that mean
What's that setting for
Funciona para DCS ?
Mine is just scanning though for 5 minutes now why is that ?
I'll try, but at the beginnig no work.. you must to push (SCAN BUTTON) twice and BINGO!!!
Hello . I m. Wondering. İs this radio listen about 110---130mhz
@johnmknox
Жыл бұрын
No. You can program it to go that low but it won't receive anything, especially airband because all airband is 99% AM and this is FM.
Thank you so much for sharing this! There's a repeater a mile away from me but has very little traffic. It's PL tones are unlisted. If it ever transmits...
Does that feature show you what you are running your Ham base on?
👍
Then what? Does a repeater act like I have more range?
When I hit exit mine just exits
I’m not the sharpest tool in the shed and I got my self a uv5r. I don’t have a license to use it but I want to tune into a local frequency to hear what’s going on but there is more to it than just frequency’s. There is tones and all this other stuff my mind can’t even process. Every one uses big technical mathy words I get lost quick when watching little tutorials on ham radios. What am I missing. I hat am I doing wrong?
@generalneyland4005
Жыл бұрын
you don't need a "license" to use your radio, stop believing this nonsense
@MacMetal215
Жыл бұрын
You only need a license to transmit. You can listen all you want. Best to find uncommon channels if you want to talk to other radios
Some reason mines not doing this can anyone please help?
I just got this radio can anyone explain what this is
@j69chevelle
2 жыл бұрын
It is scan for PL / CTCSS tones being used on the tuned frequency. Use case may be listening to the input frequency of a repeater to identify its tone. Once the tone is known you can program a channel for that repeater.
@PennsylvaniaEAS
2 жыл бұрын
@@j69chevelle ah. I've seen input frequencies and tones in radio reference. Do I need any other equipment to scan or do I just need my UV-5R Also I have the European model so I can't use the PTT button unless I'm on a frequency I'm permitted to be on, or else I would be TXing illegally
Cool thanks for the tip.
@ismailarda398
3 жыл бұрын
Poiis
i dont understand what you are doing?
I have a UV-5RHP. I'm following these steps exactly, but I never see the "CT" on the left of the LCD Screen? I never scans. Am I missing something?
@j69chevelle
5 жыл бұрын
Try these steps in Frequency Mode while monitoring the repeater receive frequency. Once you select R-CTCSS move to an arbitrary value, confirm and reselect R-CTCSS. You have to press the SCAN button while in the R-CTCSS tone selection menu and at that point you should see the flashing CT if your model has the Tone Scan function.
@nazranzafran3807
2 жыл бұрын
@@j69chevelle how about uv82
@j69chevelle
2 жыл бұрын
@@nazranzafran3807 not sure. It might not have the CTCSS scan feature.
I don't understand what's going on here.
@lukepippin4781
9 ай бұрын
He’s turning on R-CTCSS by selecting the lowest frequency, then going back to the frequency selection and pressing “SCAN”. Then when the radio receives a transmission (which he demonstrates using the other radio) it will automatically scan for the receiving CTCSS frequency till it finds it or the transmission stops. When the transmission continues, it will continue scanning.
Hey
日本でも使えればいいのになぁー
How i scan transmit ctcss code?
@neildavidson7809
3 жыл бұрын
He just showed you bro
@lukepippin4781
9 ай бұрын
@@neildavidson7809he showed how to scan for the receiving CTCSS frequency. In simplex, this will get you both frequencies because they will be the same. I think she’s looking for a way to find the transmit code for repeaters and such.
GEE! NO IDEA WHAT BUTTONS you pushed because a thumb was in the way, but I KNOW your mike works so why not "SAY what you are doing"? How about a 'do-over' because your PL SCAN method appears to be what so MANY of us need! I didn't leave a "Thumbs Down" as many others obviously did, but confess I was very temped. ANY ideas what Baofeng Models this works with?
@j69chevelle
2 жыл бұрын
Press: MENU>SCROLL to Menu 11> MENU>UP ARROW>MENU>SCAN
@hassann.6699
2 жыл бұрын
@@j69chevelle I followed your steps exactly and as I press the scan button I hear a beep and nothing happens. I have a TidRadio model TD-UV5r. What would you recommend I do?
@j69chevelle
2 жыл бұрын
@@hassann.6699 I have a BTech UV-5x3. Can't speak for this feature being available on other models.
@lukepippin4781
9 ай бұрын
@@hassann.6699nothing happens until you receive a transmission. That’s all I can figure that would be the problem.
What exactly happened or what’s the big deal . I only how todo I listen to NOAA radio weather channel
@j69chevelle
2 жыл бұрын
To use repeaters you need to broadcast a special tone in order to have your signal rebroadcast. This feature finds that tone for you rather than having to look it up or find it even if it's not published.
@j69chevelle
2 жыл бұрын
kzread.info/dash/bejne/iWGGzbKGgq7AdLA.html
Hope you have your HAM and or GMRS license.
@mitchellsands7617
7 ай бұрын
shut the fuck up lol who cares
It's not working on my baofeng ur v5
He doesn’t talk thanks for nothing
JUNK! RADIOS. DONT SETTLE FOR LESS
Really helpful, thx 👍