Yes in first row wrongly written 70° 2 MHz instead of normal 0° 2 MHz. Correct probe is 0° 2 MHz.

Best video thanks sir

Excellent Work!

@manojshrivastava9430

Жыл бұрын

Thanks Shri Ashish Srivastava For watching my video. Please subscribe my channel play list is available on my channel and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge & objectives questions are also available on my channel as a model paper no-1 to 10.🙏🙏

Very nice sir jee video banakar hamko margdrsit karne ke liye aap ko bahut bahut dhanyawad 🙏🙏

@manojshrivastava9430

Жыл бұрын

Thanks Asharam Ji 🙏

बहुत ही सरल शब्दों में USFD के बारें में अच्छे से समझाया। आपको बहुत बहुत धन्यवाद।

@manojshrivastava9430

3 ай бұрын

Thanks for watching my video 🙏

very nice sir u doing hardworking for us

@manojshrivastava9430

Жыл бұрын

Thanks Shivam jadav 🙏

Thanks for important information.

@manojshrivastava9430

Жыл бұрын

Thanks Mr.Saroj ji 🙏

Thanks sir for sharing such type ofknowledge

@manojshrivastava9430

Жыл бұрын

Thanks

बहुत-बहुत अच्छी जानकारी दी गई सर

@manojshrivastava9430

Жыл бұрын

Thanks Shri Shimbhu Meena Ji 🙏

Very very nice and knowledge wala video

@manojshrivastava9430

Жыл бұрын

Thanks

Sir Bilkul sahi jankari de rahe sir aap bahut acha kaam aap kar rahe taki sabhi SSC pwi aden ko jankari mile From Shashank Pati Tiwari Operator USFD

Good afternoon sir g

महत्वपूर्ण जानकारी के लिए धन्यवाद सर जी 🙏🙏🙏

@manojshrivastava9430

Жыл бұрын

Thanks Dear Sachin 🙏

Aapki jitni v tarif ki Jay wo kam hi hogi

@manojshrivastava9430

Жыл бұрын

Thanks Shri Chandrama Paswan Ji, For watching my video and such nice and valuable comments, मेरे चैनल को अपने साथियों से भी सब्सक्राइब करवाएं।🙏🙏

Very helpful video sir ji

@manojshrivastava9430

Жыл бұрын

Thanks Bhim कैसे है 🙏

Bahut acha video in hindi

@manojshrivastava9430

17 күн бұрын

Thanks Shri Bharat Yadav Ji For watching my video and such nice comment. Please subscribe my channel and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge, objectives questions are also available on my channel as a model paper no-1 to 11.🙏

very very useful 👍👍👍👍

@manojshrivastava9430

Жыл бұрын

Thanks Jitendra ji🙏

सभी इंजीनियर के लिए यह बहुत उपयोगी रहेगा और नए आने वाले इंजीनियर के लिए बहुत उपयोगी है

@manojshrivastava9430

Жыл бұрын

Thanks 🙏

Bahut hi saandaar video sir pranaam

@manojshrivastava9430

Жыл бұрын

Thanks Vikash 🙏

@vikashnigam1923

Жыл бұрын

@@manojshrivastava9430 please send your mobile no.

Very useful video sir

@manojshrivastava9430

Жыл бұрын

Thanks Ranjeet 🙏

Bahut badhiya video hai sir ji ldce ka sabse acche teacher hai sir ji aap

@manojshrivastava9430

Жыл бұрын

Thanks my dear Amrit 🙏

Good sir,I always wait your new video

@manojshrivastava9430

Жыл бұрын

Ok thanks 🙏

we are proud that. sir

@manojshrivastava9430

Жыл бұрын

Thanks श्री सूरज 🙏

बहुत ही सटीक जानकारी देते हैं साहब ,पूरा समझ में आता है। आपको बहुत बहुत धन्यवाद

@manojshrivastava9430

Жыл бұрын

बहुत बहुत धन्यवाद कन्हैया 🙏

Nice 👍👍

@manojshrivastava9430

Жыл бұрын

Thanks Shri Janak Singh ji For watching my video and such nice and valuable comment 🙏

Tnq sir ji

@manojshrivastava9430

Жыл бұрын

Thanks

Great work Sir. Please make more videos from complete IRPWM

Thanks sir

@manojshrivastava9430

Жыл бұрын

Thanks पवन जी

बहुत आसान भाषा मे,सटीक,संक्षिप्त और एक ही वीडियो में Usfd के बारे में जानकारी देना बहुत प्रशंसनीय है।।👌👌

@manojshrivastava9430

Жыл бұрын

Thanks 🙏

Thank you Sir..

@manojshrivastava9430

Жыл бұрын

Thanks 🙏

बहुत ही सरल. सहज भाषा के माध्यम से समझाते हैं सर जी. USFD की बहुत ही महत्वपूर्ण जानकारी दी गई है. बहुत बहुत धन्यवाद सर जी 🙏🙏🌹🌹🌹

@manojshrivastava9430

Жыл бұрын

Thanks 🙏

आपका पढ़ाया हुआ चैप्टर पुरा याद हो जता है।

@manojshrivastava9430

Жыл бұрын

Thanks श्री मिथुन आप अब शीघ्र JE बने मेरी शुभकामनाएं आपके साथ है 🙏

USFD के बारे में बहुत अच्छी जानकारी सरल भाषा मे सर जी बहुत ही उपयोगी जानकारी सर

@manojshrivastava9430

Жыл бұрын

Thanks Pradeep 🙏

Very good video sir very knowledgeable thanks for you sir

@manojshrivastava9430

Жыл бұрын

Thanks Dear Wankhede 🙏 आप जेई बने मेरी शुभकामनाएं आपके साथ है 🙏

Nice video sir ji Next video sej ,p&c measurements par banaye sir

@manojshrivastava9430

Жыл бұрын

Ok thanks 🙏

Very useful video. Very well discribed.

@manojshrivastava9430

Жыл бұрын

Thanks Samir Kumar 🙏

Very nice class. Manual ki bakj chapter vi paraihe sir please. Thanks

@manojshrivastava9430

Жыл бұрын

Ok thanks 🙏

Sir ji aur video bnaiye is topic pe

@manojshrivastava9430

11 ай бұрын

Thanks 🙏 please subscribe my channel, Play list is available on my channel, and watch my all Videos they are very useful and beneficial for practical and theoretical knowledge objective questions are also available on my channel as a model paper no-1 to 10.

करेक्शन के साथ महत्वपूर्ण जानकारी देने के लिए बहुत-बहुत शुक्रिया सर🙏🙏

@manojshrivastava9430

Жыл бұрын

Thanks 🙏

Thanku h sir for this splendid information in a short lecture.

@manojshrivastava9430

Жыл бұрын

Thanks Amit Garg 🙏

@manojshrivastava9430

Жыл бұрын

इंतजार करें शीग्र ही वीडियो ट्रैक मशीन पर दूंगा ।🙏

Very useful video. You are a candle in the darkness.

@manojshrivastava9430

Жыл бұрын

Thanks Binod ji🙏

Thank you very much sir for the wonderful video🙏🙏🙏

@manojshrivastava9430

Жыл бұрын

Thanks 🙏

Your video is giving a lot of information

@manojshrivastava9430

Жыл бұрын

Thanks Mr Vikram 🙏

A very nice and useful video you made, you have covered all details regarding usfd like frequency of rail/weld testing, types of prob and their function, process of testing in this video that means any body can get sufficient knowledge of usfd only by watching this video. Than you so much sir for making such of video for all of us.

@manojshrivastava9430

Жыл бұрын

Thanks dear Sharad 🙏

This is very useful to engineering official and you have been explain about the testing frequency of USFD related rails and welds, types of probes and their functions and action to be taken if defects are found. Very splendid 🙏 Thanks sir 🙏

@manojshrivastava9430

Жыл бұрын

Thanks Shivaji ADEN LDCE की अच्छी तैयारी करें, मेरी शुभकामनाएं आपके साथ है 🙏

Sir ,if possible please provide a short video on track machine also.I shall be thankful to u.

@manojshrivastava9430

Жыл бұрын

Ok

Very nice and very-very hard work done by you for P WAY Staff for field staff and competitive exam purposes 🙏🙏🙏

@manojshrivastava9430

Жыл бұрын

Thanks भाई LP Raikwar ji आप सभी का हमेशा सहयोग रहा है , हमने आपने बहुत दिन साथ में काम किया है।🙏

🙏 Bahut hi achchha video banaya hai sir ji with exam and duty dono ke liye jaruri hai kyu ki Aisa abhi tak you tube per koi teacher nahi hai jo ki itna hard topic ko easily mode me explain karte hai Thanks dear sir ji 🙏🙏 Rahul Kumar Pl sir AOM ka silebus ke bare bhi bataye 🙏🙏

@manojshrivastava9430

Жыл бұрын

Ok thanks Dear Rahul 🙏

@scr123ecor

Жыл бұрын

🙏🙏

Stunning video sir , such a very useful and relevant information to us to inherit the knowledge,,, absolutely great video sir..... Thanks 😊😊😊.........

@manojshrivastava9430

Жыл бұрын

Thanks Shiv patil 🙏

Kya likhu sir! Koi javab Ni h Apka.. Shandar

Sir please one video upload on bridge

@manojshrivastava9430

Жыл бұрын

Ok

Sir kindly make a video covering the IRTMM 2019

@manojshrivastava9430

Жыл бұрын

Ok Mr.Anuj thanks 🙏

Sir, please make a video on track machine too.

@manojshrivastava9430

Жыл бұрын

Ok thanks 🙏 मेरे पूरे वीडियो देखे तो आपको बहुत लाभ मिलेगा। मेरे चैनल को सब्सक्राइब करें और अपने साथियों से भी सब्सक्राइब करवाएं। धन्यवाद

Sir objective prove per video banaye ex bolt darar ko pata kis prove se 37degree

@manojshrivastava9430

Жыл бұрын

Ok

Sir , How many probes are used in USFD testing ?

Table no 10 AT welding probes first row will be 0 degree 2Mhz instead of 70 degree 2 Mhz,

@manojshrivastava9430

Жыл бұрын

Yes in first row wrongly written 70° 2 MHz instead of normal 0° 2 MHz. Correct probe is 0° 2 MHz.

Sir, हम ये कैसे पता लगाए की डिफेक्ट OBS है या IMR , इसका vidoes ka link share kijiye 👏👏👏👏👏

@manojshrivastava9430

3 ай бұрын

आप USFD मैनुअल पढ़े, IMR, OBS,OBSW, सभी के बारे मे मिल जायेगा, मेरे USFD वीडियो से भी कुछ जानकारी ले सकते हैं। Rail testing IMR +++ Red colour IMRW +++ Red colour Weld testing DFWO o red (circle) DFWR o o red (circle) ये लाइन पर निशान लगाते है। Pick ऊंचाई अपने सेक्शन के USFD के JE/SSE से अधिक जानकारी के लिए पूंछ ले।🙏

@RamratanKumar-ms2bz

3 ай бұрын

@@manojshrivastava9430 manual kha se milega Sir

@manojshrivastava9430

3 ай бұрын

यदि आप JE/SSE(P.Way) to आपके कार्यालय में होगा।, यदि आप ट्रैक मेंटेनर हैं तो आप अपने डिपो प्रभारी/ इंचार्ज से अपनी कार्य के प्रति लगन के आधार पर मांग सकते हैं।

Ms liner का full gorom kya होता है सर

@manojshrivastava9430

Жыл бұрын

मिथुन M.S Liner= Mild steel Liner

@user-pg3lz2ki7n

Жыл бұрын

@@manojshrivastava9430 धन्यवाद,,महोदय

SRT or DRT may kitny total probe hote hai ? 7 or 14 hai kaya kiliar kijie sir please

@manojshrivastava9430

Жыл бұрын

Mr.Ghosh (1) SRT =7 Nos (37° =F+B=2nos) as per C/S- 06 or new USFD manual Now total probe=9 nos. (1) DRT =14 Nos (37°F+B= 2 nos for each rail = 4 nos ) as per C/S 06 or new USFD manual Now total probe= 18 nos.🙏🙏

@Bappa383

Жыл бұрын

Sir thank you so much

Nice sir plz ur mobail no. Sir

Very nice class. Manual ki bakj chapter vi paraihe sir please. Thanks

@asharamyadav3934

Жыл бұрын

Very nice sir jee 🙏🙏

@asharamyadav3934

Жыл бұрын

Thank you sir jee 🙏🙏

@manojshrivastava9430

Жыл бұрын

Thanks Ghosh 🙏

@manojshrivastava9430

Жыл бұрын

Thanks Asharam ji