Newbie to Cricut here, and this tip just might have kept me from tossing the whole craft out the door...the comments gave me the tips I needed to do a very intricate project. You are an angel for sharing this. Thank you so much!

@TheShawnMosch

Ай бұрын

you are very welcome! Due to the MANY requests I actually have a FULL video on how to set this up in Design Space coming out today!

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

I’ve been delaying a written project because I knew how frustrating it would be! But I think I can actually do it with this hack!

This was such a brilliant hack!!! I cannot thank you enough… tiny fonts are sooooo difficult

Oh my gosh I QUIT until now! Thank you!

I’m working on a tiny delicate project for my friend who is getting married. I’ve been struggling with this project for days, recutting and recutting because I can’t weed it. Thank you for this!

@Sssilentlaugh

2 ай бұрын

I’m in the very same boat!

thank you.. just what I was looking for, A step by step video would be lovely🎈

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

Thank you so much for this hack! Going right now to try it!

this is AMAZING!!! i am about to start a project that is really important to me and i knew the weeding was going to be so very tedious and overwhelming so i decided to search youtube and see if there were tips for weeding delicate fonts. THIS IS EXACTLY WHAT I NEEDED!!! i am so grateful to you!! thank you!!!

You just changed the game 🤯

Thank you so much. Well done

Oh my god, you are a genius. THANK YOU

@TheShawnMosch

Ай бұрын

I love it when someone calls me a genius! If you like this, make sure to check out my site and follow me on social media for more crafting genius!

What a great tip! Thank you!!!!

THANK YOU SO MUCH!!!!!!

Wonderful tip .. thank you so much .. 😊

thank you so much. i was worried on how to do this. but you came through. you are the best ma'am. Love from South Africa

Brilliant 👏 👏 👏

THANK YOU so much!! ❤

Thank you so much for the tip cause I’m making 40 labels for champagne glasses and I have only done the sample label ❤

Genius!!

Thank you.....😊

Omg thank you

Thank you

Thanks ❤

Thank you soooo much for sharing this idea.❤

This is amazing!!!! Thank you!

Yes

Thanks for the tip 🙏🏽

Thank you so much ❤😊

Respect

Soooooo helpful! Trying now

Such a smart hack!!

This was very helpful! Thank you so much!!!

Thank you! What a great tip!

This was extremely helpful!! Thank you!!

Great hacks... THANKSSSSS

This is a truly amazing tip!!!!

thank you so much

That's the most amazing tip!!! Thank you so much???

SO SMART THANK YOU SO MUCH!

You are the answer to my pleas to the crafting gods & goddesses! Thank you... it WORKED!!! ~squee/happy dance~

@TheShawnMosch

4 ай бұрын

I am so happy that it worked for you! Make sure to tell everyone you know that I am the answer to the pleas to the crafting gods and goddesses! I feel like word of mouth is the best way to grow!

@getmoney1957

12 күн бұрын

Still having an issue with glitter iron on

So genius!❤

Brilliant!

amazing 😮😊

You may have answered my prayers.

@TheShawnMosch

Жыл бұрын

I hope so! I honestly did this for the first time as a test, and I was so impressed at how well it worked that I had to make this video.

You're a legend 💯🫶🙏

Wow! Great tip!

Omg this is amazing 🤯 Jaw literally dropped 😂🎉🙌🏽

Amazing!!!

Life saver!!!❤

I’m new to cricut and struggling some with this. I didn’t quite get the offset correct like yours lol Can you make a video showing how you did this on cricut design?

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

BRILLIANT!!!!

Great tip! What vinyl are you using ?

@TheShawnMosch

3 ай бұрын

This is Siser EasyWeed. Make sure to check out my Vinyl Buyer's Guide to make sure you are getting the best price on your vinyl! www.shawnmosch.com/vinyl-for-cricut/

Great tip!! Do you have a video demonstrating how to get that handwritten recipe from the physical piece of paper all the way through to being ready to cut in cricket? I don’t even know how to save something from scratch and as a svg or png file (wtv is required) to make it usable using my iPad. Full on Beginner here. 😊

@TheShawnMosch

10 ай бұрын

Since the hand written recipe was really old had tiny details I actaully hired someone off of Etsy to convert it to a SVG for me. They do this on a regular basis so that way I knew it would be really well done!

Genius

Could you show the whole process? ❤

@TheShawnMosch

Ай бұрын

I will work on a vide for that!

@gorgeouslyjen

Ай бұрын

Yes please!!! Because I have no idea how to do it

@TheShawnMosch

Ай бұрын

@@gorgeouslyjen the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

This is GREAT! I really could've used this a few days ago. I was doing a batch of hats and couldn't complete them because it was pulling up the letters. Just curious, if you're using a cricut to cut, are you using a Washi material setting and which vinyl are you using? Thank You!

@TheShawnMosch

Жыл бұрын

I always use Siser vinyl, and I cut that on the iron on vinyl or iron on plus setting on my Cricut.

🤯🤯

Thank you so much for sharing this. What material setting do we cutting on

@TheShawnMosch

2 ай бұрын

I was cutting on the iron on setting for this, since I was using Siser HTV

@sandynavarro2344

2 ай бұрын

Thank you for the reply

Thank you so mean you add an quite large offset around words and attached or welled together before sending to cut ? Thanks

@TheShawnMosch

Ай бұрын

You add a small offset . . . this one is about 1/4", and then select the words and the offset and click Attach before sending to cut

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

How do you cut that perfect? Mine rips the vinyl

@TheShawnMosch

4 ай бұрын

what brand of vinyl do you use? This is Siser Easyweed

Can you please make a video or refer me to a video that shows how to actually do this? When I use the offset function it is only cutting the shadow around my words, and not the letters within the shadow. Thanks in advance!

@TheShawnMosch

11 ай бұрын

you would need to attach the offset and the letters so they cut together

@bainTV

11 ай бұрын

Do you mean just group them together after I make the offset?@@TheShawnMosch

@TheShawnMosch

11 ай бұрын

@@bainTV no, group will just hold them together on the Design Space canvas. If you want them to cut on the same mat in the same location as they are in this video use Attach. Attach holds placement and position

@bainTV

11 ай бұрын

You saved my butt thank you so so much!@@TheShawnMosch

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

Does this hack work for infusible ink sheets ?

@TheShawnMosch

Ай бұрын

I have not tried it with infusible ink sheets. If you test it out let me know!

You can dona tutorial ‘’’?’’ Thanks you you are magnificent

@TheShawnMosch

Жыл бұрын

Can you clarify what you want a tutorial on?

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

Do you weld? Because when I don’t weld it wants to cut in two different mats and when I do weld you can’t see the letters only the shadow

@TheShawnMosch

Жыл бұрын

You would have to attach, not weld. Weld is used to join things together

@arianamaldonado1064

Жыл бұрын

What base material do you select so it cuts best?

@TheShawnMosch

Жыл бұрын

@@arianamaldonado1064 that depends on what you are cutting. For this I was cutting Siser iron on vinyl, so I used the iron on vinyl setting.

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

I can’t get the small letters to stay on the paper and they continue to stick to the whole.. some stick some transfer.. trying to figure out a good way to get them to stick while removing the unusable outside stuff. Any suggestions on that? Do I use a deeper cut on my Cameo? Instead of 1/10 use 2/10?

@TheShawnMosch

5 ай бұрын

are you using regular vinyl or HTV?

Why does it on yours, when cluck on make it and you're looking at matt your letters are all black but mine are coming with a white line tracing the outlines of the letters. Please help i followed all of your steps

@TheShawnMosch

Жыл бұрын

I have never seen the lines have a white outline. If you want to send me an email with a picture of what you are seeing I can help troubleshoot more.

How did you offset each word? When I do my offset, it just makes an offset around the entire text block. I watched your tutorial video, but you only had one word. Thank you!

@TheShawnMosch

Жыл бұрын

I selected all of the words at the same time and clicked Offset

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

Is there a specific Off Set, such as a number or anything.? Do you weld your text also? Thanks!

@TheShawnMosch

8 ай бұрын

The size would depend on your design and the font. You would not weld . . . attach, not weld. Weld would join the text and the offset together. Attach holds placement and position.

@terrimckeighen7154

8 ай бұрын

@@TheShawnMosch thanks so much!

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

How did you get the offset to not be a separate layer

@TheShawnMosch

7 ай бұрын

After you add the offset, select the original text and the offset and click Attach. This will hold them in the same spot from the canvas to the cutting mat and put them on the same cutting mat.

@dansbyd1

7 ай бұрын

OMG thank you so much this was the missing piece I needed. I couldn't figure out how to keep them together. Thanks so much

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

So do you attach the offset later to the words? Its shows words and offset on different mats for me.

@TheShawnMosch

Жыл бұрын

If you make the offset and the words the same color and attach then it will work perfectly

@vickiel914

Жыл бұрын

@@TheShawnMosch I did it and it worked great! Thank you!

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

How do you put an offset or shadow around ??

@TheShawnMosch

8 ай бұрын

In Cricut Design Space there is an Offset button. It is on the top panel of you are using the computer version of Design Space.

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

What cut setting did you use?

@TheShawnMosch

Жыл бұрын

I used the iron on vinyl setting

@planning_with_patches5860

10 ай бұрын

​@@TheShawnMoschI've been shredding matte black vinyl. Trying to cut small letters.

@TheShawnMosch

10 ай бұрын

@@planning_with_patches5860 what brand of vinyl? Could you use HTV instead?

@planning_with_patches5860

10 ай бұрын

@@TheShawnMosch Matte Black Orcal

@TheShawnMosch

10 ай бұрын

@@planning_with_patches5860 the vinyl in this video is HTV. If you can use that, I highly recommend it!

How much of an offset is this please?

@TheShawnMosch

Жыл бұрын

I believe I did 1/4" for this one, but how much to do will depend on your project. If your words are really close together you might have to go smaller.

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

Do you need to combine or attatch ?? I’m having trouble it wants to go on another mat

@TheShawnMosch

9 ай бұрын

You can Attach to make sure that the offset and the cut are the same color, and that the offset stays perfectly in place around the lettering!

@sheriswanson9895

9 ай бұрын

@@TheShawnMosch thank you, and thank you for sharing this! I had just tried weeding thin letters, that wasn’t working, this will be a huge help.

@TheShawnMosch

9 ай бұрын

@@sheriswanson9895 when I did this the first time it was just to test it out and see if it would work . . . I was weeding hand written text from a recipe card and I needed to do 10 of these and was so frustrated after the first one! Once I did this trick, the rest of them went SO MUCH FASTER!!!!!

@sheriswanson9895

9 ай бұрын

Ohh, I think I finally got it. Group and attach, will keep it together, and not on desperate mats.

@sheriswanson9895

9 ай бұрын

@@TheShawnMosch Oh my gosh! I would have been frustrated too.

But HOW do you add it?????

@TheShawnMosch

Жыл бұрын

like this www.shawnmosch.com/offset-in-cricut/

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

How do I create the shadow around the letters? Such a good idea

@TheShawnMosch

Жыл бұрын

I used the offset feature www.shawnmosch.com/offset-in-cricut/

@TheShawnMosch

Ай бұрын

the more detailed tutorial on this process is at kzread.info/dash/bejne/g2yVptVwqZObZpc.htmlfeature=shared

Thank you