El punzon que hociste con el tubo del amortiguador te corta los circuloa a la perfeccion!!!!... No cabe duda eres practico y eficiente... Saludos

@Cechaflo

6 жыл бұрын

Como no pude conseguir un sacabocados de esa medida, tuve que recurrir a este 'tubo' para cortar las piezitas de cuero de 1 3/4 de pulgada de diámetro. El amortiguador fue de camión, ya inservible, lo conseguí en una venta de chatarra a 1 dolar.

Nice

Where did u buy the buttons used in this video?

Lol I remember having to cover buttons for wedding dresses as a kid, ever try doing lace or buckles?

@Cechaflo

6 жыл бұрын

Nice this video reminded you when you were a kid! Procedures are similar to doing upholstery buttons.

@jamit2u

6 жыл бұрын

Cechaflo I’ve done leather for shoes, this was a nice memory took me way back before Ma had her stroke at 94 she’s still doing ok but I sure miss those days when she was well

@tapecariapicoense

6 жыл бұрын

Essa máquina para afinar o couro eu não conhecia

@Cechaflo

6 жыл бұрын

Muchos artesanos del cuero y zapateros lo usan. Algunos tapiceros que trabajan el cuero tambien lo usan. kzread.info/dash/bejne/jHeTo6OwaKSrh5M.html

I have the C.S. Osborne version of that press but mainly do 3/4 inch buttons. It works great. I wish I had a powered leather skivver like that. It really takes the work out of it. Still doing it by hand...haha. Are those 1 inch?

@Cechaflo

6 жыл бұрын

The press I have is similar to yours. The wrapped in leather buttons outcome is of 1inch. The leather skiver certainly helps a lot.

Are you using the CS Osborne “heavy” die for thicker fabrics, or the regular die?

@Cechaflo

3 жыл бұрын

It is another regular trademark die. I did a slight adjustment for thicker materials.

You make this look so easy but I am sure it took some planning to get the technique done to perfection! Thank you for sharing your wonderful work on KZread Sir! 👍👍👍👍❣️

@Cechaflo

6 жыл бұрын

I really appreciate your kind remarks! You are welcome anytime! The press and dies certainly do the job. Long time ago I used to make artisan buttons from small round metal pieces because I did not trust these 'upholstery buttons', but one day I decided to inspect very close how these two part buttons are fastened together with a 'button press machine' and tested they are tightly assembled and difficult to separate. The hand press is not difficult to operate. What is important is a thin material to do the wrapping (it could be cut round shape with scissors), the correct size of two dies, and the 'half pieces' related measure for the dies to make the buttons. Suppliers, kindly would give us precise information.

@deltajohnny

6 жыл бұрын

The look great, as if they were from a big factory!! 👏👏👏👏👏 Each time that I see the leather skiving machine, I would like to get one... it's really useful!! 👍👍👍

@Cechaflo

6 жыл бұрын

Hello Johnny, Thanks for watching! Regarding the 'leather skiving machine' many leather upholsterers consider it as a MUST. Some time ago, I used to go to the shoemaking neighbourhood in this city and ask the leather artisans to do the skiving for me. These guys were very busy and I had to wait my turn. If I needed a strip of leather to do piping I had to go there more than an hour from here to get it done. Tired of that I decided to buy my own leather skiver which I have at my hand anytime.

Great videos. I am looking to purchase a die (#30) for general upholstery fabric. Would the button die set you are using be suitable for vinyl and soft automotive leather? My old boss tells me to just buy a heavy and double up the fabric. Any advice would be great, thanks.

@Cechaflo

3 жыл бұрын

Most of these dies are for thin materials. If you would use leather it is advisable to skive the piece to reduce the thickness (6 to 7 mm approx.) If you would use vinyl take off the backing cloth in the back.

Hello and thank you for posting this. At mark 1:37, you put a piece of leather into a machine, to mash it down and make it thinner? What is that thing, and can I achieve that effect without it using some hand tool?

@Cechaflo

2 жыл бұрын

Actually, to do the wrapping of buttons with the press and dies they should be thin enough to be folded over to the metal molding buttons. The machine I use is a leather skiving machine to reduce the thickness of leather material to 0.7 mm thick at least.kzread.info/dash/bejne/g4qtu6VsXb3Ipco.html The skiving process could be done by hand with a very sharpened knife. Not so easy but it could be done. Unfortunately, I do not have a video.

Ohhhhhhh suprise

@Cechaflo

6 жыл бұрын

Upholstery art is a world of surprises we woud discover each time!

What about buttons that have a prong at the back, how are they made?

@Cechaflo

3 жыл бұрын

Procedures are similar. I do not have the special set of dies for these prong buttons.

Que es esa maquila verde? Que se puede utilizar en vez de eso? Parace que apolasta el material.

@Cechaflo

4 жыл бұрын

La máquina color verde es una 'rebajadora de piel/cuero' que sirve para adelgazar el cuero. Otra manera sería manual con un cuchillo desbastador.

Ну это уже через чур, клеить!! И так все обтягивается без морщин !!!

Ham is machine ko kaise khareed sakte hai

Класс

@Cechaflo

6 жыл бұрын

Thanks for kind remark!

আমাদের ১টা মেশিন লাগবে কিভাবে পাব?

@Cechaflo

7 ай бұрын

We do not sell machines, sorry.

Hi, Cechaflo. I guess you have many different button and cutter sizes. Can you tell me what punch cutter diameter do you use to cut 3/4" buttons?

@Cechaflo

2 жыл бұрын

I do not have that cutter, sorry.

@UFOENGINE

2 жыл бұрын

@@Cechaflo Thanks anyway Cechaflo. Have a good time.

@Cechaflo

2 жыл бұрын

​@@UFOENGINE You could make your own calculations. I have used 7/8" buttons (bare core) My punch is 1 3/4 diameter. The idea is to have enough flap that should be folded over to the inside button reverse. The buttons you want to use are 3/4" ...1/8" less than mine. So, now you can calculate how wide your punch will be. kzread.info/dash/bejne/m2iWtqyDqsfNYKg.html kzread.info/dash/bejne/e2uto6pwdrSZls4.html Good luck!

Where can I purchase the button machine?

@Cechaflo

3 жыл бұрын

You could directly ask for information and assistance to Sailrite: www.sailrite.com/W-1-Hand-Press-Button-Cover-Die-Hole-Cutter-45-1-1-8 www.sailrite.com/C.S.-Osborne-W-1-Hand-Press www.sailrite.com/Wire-Eye-Upholstery-Button-Forms-45-1-1-8

What pressing machine called?

@Cechaflo

3 жыл бұрын

It is called "hand button press machine". Can be found at local hardware store or upholstery supplies stores . Also in online stores such as Amazon, Ebay, Alibaba, etc

Hello

I LOVE YOU THE BEST MEN

what is the name of this tool and where to buy it?

@Cechaflo

3 жыл бұрын

It is called "hand button press machine". Can be found at local hardware store 🧰 or upholstery supplies stores 🪑. Also in online stores such as Amazon, Ebay, Alibaba, etc

@dotamovie1033

3 жыл бұрын

@@Cechaflo thank you for the reply. got it!

Fez no botão n 18

how much this button machine?

@Cechaflo

Жыл бұрын

The button machine cost approx. 100 USD The die cost 30 USD

Quanto custa para botoes num. 18

@Cechaflo

2 жыл бұрын

El que tengo me costó 50 USD aprox.

Hi. What is the diameter of that cutter at 02:08?

@Cechaflo

2 жыл бұрын

The cutter is 4.5 cm wide (1 3/4" approx)

@UFOENGINE

2 жыл бұрын

@@Cechaflo Thanks for the reply. This particularly you used to make 36 sized button in the video, right?

@Cechaflo

2 жыл бұрын

@@UFOENGINE I do not know which number it is, but the diameter is 7/8"

hi,were can i get this tools??

@Cechaflo

5 жыл бұрын

If you are in USA: www.sailrite.com/W-1-Hand-Press-Button-Cover-Die-Hole-Cutter-45-1-1-8 Online worldwide: www.ebay.com/bhp/button-maker www.amazon.in/SLB-Works-Button-Making-Machine/dp/B077JJM35S www.amazon.com/2-1-Inch-NEIL-Button-Machine/dp/B0042ST1MY

MDnihal