Upgrade your Shop Drill Press // Easy Woodshop Project

Тәжірибелік нұсқаулар және стиль

For $90 off across your first four Green Chef boxes, go to greenchef.us/90shopnation and enter code 90shopnation.
Drill Press Table Plans - bit.ly/3D6UzbP
Could your drill press use a little help in the shop? I think most can and I think that this simple yet effective project is just the ticket. In this video I design and build a drill press table featuring a custom fence, various storage options, interchangable work tops, and integrated dust collection.
This design is meant to work for just about any shop and can be customized to perfectly fit your needs. I'm very happy with the end product and have already found myself using it a LOT. The design calls for a minimal amount of wood that you probably have laying around your shop so why not make use of it! Using the full-color plans I created I built this project in a matter of hours.
We explore a couple of different options for a fence and even discuss some bonus "add-ons" to incorporate on your drill press to make it that much more effective. It's easy to neglect the drill press in your shop but it's time you give it the attention it deserves!
Jonathan Katz-Moses KZread Channel - bit.ly/3qfYrje
His Drill Press Table - bit.ly/3qisLtn
Links (Affiliate links help sponsor the channel!):
----------------------------------------------------
Powertec T-Track (24") - amzn.to/3xCNOJO
Powertec Mini Hold Down Clamps - amzn.to/3zKrTlE
Powertec Dust Port - amzn.to/3gQiJvm
Powertec Drill Press Fence - amzn.to/3gS4CWn
Magnetic Tool Bar (2-pack) - amzn.to/35SN3QM
Loc-Line Adjustable Suction Hose Kit - amzn.to/2SMe9GG
Small Flexible Magnetic Light - amzn.to/3djnnRR
1/4-20 Threaded Inserts - amzn.to/3gTYs8a
1/4-20 T-Bolts & Knob Kit (4-pack) - amzn.to/3zL6Csc
1/2" Dia. Rare Earth Magnets - amzn.to/2SKi3jl
WEN 4225T Drill Press - amzn.to/3vPr5c2
Stop Block - bit.ly/3wphdbY
Your Next Shop Project: Versatile Garage Workbench
Full Build Playlist - bit.ly/3xTl7IT
Plans - bit.ly/3QWVIbE
Shop Nation Links:
----------------------------------------------------
Shop Nation Website: www.shopnationstore.com
Instagram (@dreamshopnation): / dreamshopnation
Timberland Pro: bit.ly/ShopNation_TimberlandPro
Patreon: / shopnation
This video is sponsored by GreenChef. Thanks for watching!

Пікірлер: 228

  • @andyjame5608
    @andyjame560810 ай бұрын

    This press has worked like a charm for my projects kzread.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

  • @aaronalquiza9680
    @aaronalquiza96803 жыл бұрын

    2 things: - you can see how dedicated he is with his infomercial that he's running the drill press while doing a skit. - he got a tan.

  • @scottkennedy5842
    @scottkennedy58423 жыл бұрын

    Very funny intro it was a good laugh. Need that these days.

  • @CJICantLie

    @CJICantLie

    2 жыл бұрын

    I imagine r/wheredidthesodago would enjoy it.

  • @redcard3083
    @redcard30833 жыл бұрын

    Another plus of the store bought fence is that you can turn it flat to use as a low profile fence for smaller stock where the chuck would hit the fence.

  • @DavidYancy
    @DavidYancy3 жыл бұрын

    Loved the awkward "WHAT DO I DO WITH MY HANDS?!" intro. LOL!

  • @jajablonsky
    @jajablonsky3 жыл бұрын

    Nice build Travis. Always enjoy watching your videos for inspiration. Your plans are very detailed and easy to follow too. Keep them coming.

  • @crmcbrideww
    @crmcbrideww3 жыл бұрын

    Wow the dust collection on that table saw is terrible.

  • @nbichsel1
    @nbichsel13 жыл бұрын

    this is exactly what I want to make! thanks for combining all those ideas together.

  • @DadGuyDIY
    @DadGuyDIY2 жыл бұрын

    Love it. I watched all of it even though I have very little interest in getting a drill press right now. Over the years I have watched all of you videos, it has been awesome to see you grow and improve your videos and your skills. Keep up the good work! You clearly love your “side hustle “

  • @averagejoesworkshop
    @averagejoesworkshop3 жыл бұрын

    Opening alone earned a like and comment! Good creativity Travis!

  • @jeffrivera8973
    @jeffrivera89733 жыл бұрын

    Love the Park City shirt... oh the video was good too! Thanks for sharing!

  • @jewdd1989
    @jewdd19893 жыл бұрын

    Haven’t even watched it yet and I’m so excited, finally!!! Now can you build custom organization in your shop cabinets... I need ideas like drop down shelves etc. 🤞🏼

  • @danlynch1154
    @danlynch11543 жыл бұрын

    Again we’ll done ! Looks great!

  • @heydoyourhomework
    @heydoyourhomework2 жыл бұрын

    Holy cow, that Laguna table saw was spewing some serious dust. Love your approach to these videos. The easy switch from woodworking to metalworking for a drill press is key. Glad you underscore that.

  • @kyle6seaman
    @kyle6seaman3 жыл бұрын

    great build! I would love to see more b-roll of the final project in use. that goes for your other project too! love your stuff and keep it up

  • @akbychoice
    @akbychoice Жыл бұрын

    This gave me an idea for a cast iron table using an old table saw top.

  • @jeremybehrens3389
    @jeremybehrens33893 жыл бұрын

    Great ideas, been looking for this type of project!

  • @billybike57
    @billybike573 жыл бұрын

    Great job, you always do such pro work!

  • @brucegibson8053
    @brucegibson80533 жыл бұрын

    Great job! Yet another easy build to help in the shop. Thanks!

  • @ar15gator
    @ar15gator3 жыл бұрын

    Another good project! Thx for sharing once again!!

  • @chronosynth
    @chronosynth3 жыл бұрын

    Man this channel has come a long way! I remember when you had less than 30k subs. You make really great content. Keep up the good work.

  • @jayeckhart1561

    @jayeckhart1561

    3 жыл бұрын

    I was watching some of his old videos and I think it was his first workbench video that he said he had something like 25 subs.

  • @MrGeroth
    @MrGeroth3 жыл бұрын

    Travis, this is the best video yet. Thanks for sharing. Love the intro.

  • @TheRidgerunner1959
    @TheRidgerunner19593 жыл бұрын

    Good video Travis. Fun to watch and a good design.

  • @MakerBeach
    @MakerBeach3 жыл бұрын

    Nailed it! Great design and looks like it will serve you well.

  • @makermark67
    @makermark673 жыл бұрын

    Great project. Great work.

  • @calvincassle7153
    @calvincassle7153 Жыл бұрын

    Nice upgrades. A keyless chuck would be the icing on the cake.

  • @g.Narly555
    @g.Narly5553 жыл бұрын

    Cool build! One of the things I'd like to see is how to quickly and accurately keep the table perpendicular to the drill itself. My table always rotates along the post as I raise/lower it.

  • @thedevilinthecircuit1414

    @thedevilinthecircuit1414

    8 ай бұрын

    If you never have need to shift the table left and right based on the kind of work you do with the drill press, the solution is simple: drill 3/16" hole in the top and the bottom of the toothed rack on the vertical pillar and install a screw into the pillar. That keeps the center of the table perfectly aligned with the quill's axis as you raise or lower the table.

  • @dennisguest5280
    @dennisguest5280 Жыл бұрын

    Great project and nicely executed 👍🏼

  • @neilf4128
    @neilf41283 жыл бұрын

    Very good design. Not too bulky or obtuse. I would add one last thing... Extendable side wings, I like Shop Smith's that slide out on square aluminum bars. Sometimes you need that extra distance when drilling out waste for table legs. But even hinged extensions could work also.

  • @aRndBelgianGuy
    @aRndBelgianGuy3 жыл бұрын

    Well done, Travis !

  • @bw162
    @bw162 Жыл бұрын

    Great video. I liked everything up to the point of paint. I must say, you have far more confidence in your plans then I do. Doing all the cuts for the entire project in advance takes guts and confidence you may not want to modify it.

  • @profcah
    @profcah3 жыл бұрын

    Great build! Gonna make one for my smaller drilllpress

  • @garytucker6485
    @garytucker64852 жыл бұрын

    Great video. Thus top is on my to do list! Thx for sharing

  • @sailingokaliptus
    @sailingokaliptus3 жыл бұрын

    Reminds of those earlier 90’s infomercials. Like the look. Keeps them coming!

  • @dennisjohansen8490
    @dennisjohansen84903 жыл бұрын

    Good stuff. I don't even have a floor-standing drill press. I just like your videos. (Love the Park City shirt too.)

  • @sharirobinett3999
    @sharirobinett39993 жыл бұрын

    Love this! Now I just need the drill press 😁.

  • @vmoutsop
    @vmoutsop3 жыл бұрын

    Cool build!

  • @willhoward9190
    @willhoward9190 Жыл бұрын

    great job. I will be building one for myself soon.

  • @TheWunshot
    @TheWunshot3 жыл бұрын

    I dig it. Jonathan Katz Moses makes probably the best stop block around. Figured since you used his table as a base, pimping his stop block is a fair compromise. 😁🤟

  • @michaelrigoli5489
    @michaelrigoli54893 жыл бұрын

    Awesome as always! We’ll done..

  • @John-NeverStopLearning
    @John-NeverStopLearning3 ай бұрын

    For dust collection 3D print a telescoping set of tubes with an opening at/ in the bottom piece.

  • @SpencleyDesignCo
    @SpencleyDesignCo3 жыл бұрын

    dude that intro was hilarious 😂

  • @keithspencersr.6806
    @keithspencersr.68063 жыл бұрын

    Great design

  • @Korgon2013
    @Korgon20133 жыл бұрын

    I like Matthias Wandel's table. Yours is also awesome.

  • @09ironman1
    @09ironman1 Жыл бұрын

    Very nice job well done

  • @SomeGuy.
    @SomeGuy.3 жыл бұрын

    The intro is wonderful.

  • @chrisanderson4188
    @chrisanderson41882 жыл бұрын

    Well thought out!

  • @Nuck82
    @Nuck823 жыл бұрын

    Lol I like how you didn't use your little stop block you did for the miter saw table. Ive been wanting to add that to my table for awhile now

  • @shawnmorin3848
    @shawnmorin38483 жыл бұрын

    Nice work bro. Just moved and I can’t even think about building until I get all the stuff in storage!

  • @ChrisHornberger
    @ChrisHornberger Жыл бұрын

    I don't buy many plans; I bought these. Looks fantastic.

  • @jameshodgins1937
    @jameshodgins19373 жыл бұрын

    Nice infomercial lead in.......and, nice drill press table.

  • @foleysshop4258
    @foleysshop42582 жыл бұрын

    You have inspired me to rework my shop

  • @Kkuts37
    @Kkuts373 жыл бұрын

    Great build!! Super good intro...

  • @buckmcdaniel8631
    @buckmcdaniel86312 жыл бұрын

    I like your table with the dust collection. I'm thinking of making one, too, but with a bunch of holes surrounding the zero clearance plate. This will give the dust a place to go. I only have a bench version so I will have to carefully consider the drawers, but if they fit.....

  • @chrisshannonmoeller781
    @chrisshannonmoeller7813 жыл бұрын

    Cool project.

  • @nosheepUSA
    @nosheepUSA2 жыл бұрын

    Great video!

  • @callofmasterchief
    @callofmasterchief3 жыл бұрын

    Tele Shop Nation for the win!

  • @brentfowler2317
    @brentfowler23173 жыл бұрын

    Awesome bro

  • @gidgemo1869
    @gidgemo1869 Жыл бұрын

    Awesome build. And you’re way better than the Sham Wow guy ever dreamed of being! If KZread doesn’t work out, you could have a great future in infomercials!

  • @FrugalFixerSpike
    @FrugalFixerSpike2 жыл бұрын

    Building one for my shopsmith. Love how you made it thin, if deeper, drawers become full,, heavy, unorganized Great idea on magnets and tape storage I will add foam to one drawer, as I use the router, pin router in mine. Trying to figure out my pin, on the top of table. I came up with a circular removable insert in my drawing. Rotate vacuum hole around work, pin is centered anchored to base below. Am I missing something. Need mine light, as I will be installing on my aluminum table, when standing up, revoing otherwise. Part of the Shopsmith system, I am developing for building guitars mostly. Thanks, great content.

  • @MistAtsiM
    @MistAtsiM2 жыл бұрын

    You made my day with the dustbae

  • @RobRobertson1000
    @RobRobertson10003 жыл бұрын

    That intro was SO funny :)

  • @craigmaddison8254
    @craigmaddison82543 жыл бұрын

    That intro was hilarious

  • @jacklee4492
    @jacklee44922 жыл бұрын

    I like your table design an I'm considering some thing like for my bench top along with a roll cabinet. Rings workshop could be worth watching for drill dust collections.

  • @CharlesJohnson-yd9ym
    @CharlesJohnson-yd9ym2 жыл бұрын

    Very Inspiring... Thank you, for an AWESOME Build!!! Chuck in Michigan

  • @LogHouseFarm
    @LogHouseFarm3 жыл бұрын

    That's a great design - The dust collection would be nice, my drill press area is a real mess!

  • @andy-in-indy
    @andy-in-indy3 жыл бұрын

    9:44 - Most relatable woodworking face. Also, I thought sawdust in the children's hair was a parenting goal. . .

  • @Tboiy555

    @Tboiy555

    3 жыл бұрын

    I think you and Travis got it wrong, it's not saw dust, it's MAN Glitter!

  • @nwo7831
    @nwo78318 ай бұрын

    Awesome video

  • @ramroad2008
    @ramroad2008Ай бұрын

    I would have liked for you to have explained and shown how the dust collection works.

  • @robertlivingstone3947
    @robertlivingstone39472 жыл бұрын

    Great video

  • @B.A.Bassangler
    @B.A.Bassangler11 ай бұрын

    Hmmm, maybe I'll buy a $40 table so I can build a really sweet one, LOL, very tempting but maybe just but the newer Wen, and mod it to get the DC. Also love the hi-lo fence!

  • @measuretwicewoodworks
    @measuretwicewoodworks3 жыл бұрын

    Sounds like you’re on the right track

  • @scottmorris4914
    @scottmorris49142 жыл бұрын

    Great video.

  • @keeganbuilds
    @keeganbuilds3 жыл бұрын

    I'd add some thumb screws to the 4 corners for hot swaping those metal/wood interchangable tops. Also, maybe just me but I like to keep my drill/forstner bits nearby, so I'd add a mount for those (maybe to the stand itself so they stay with the press instead of being removable).

  • @TheLastPharm

    @TheLastPharm

    11 ай бұрын

    I'd go for speed knobs as they're more comfortable to use, but the idea is the same, definitely.

  • @EvanDunville
    @EvanDunville2 жыл бұрын

    Nice build. I have a small toolbox under my table for all my accessories.

  • @kierancarter8369
    @kierancarter83693 жыл бұрын

    And here I was thinking this morning, "Hmmm...I haven't seen a ShopNation video in a while"

  • @charleshunt9217
    @charleshunt92172 жыл бұрын

    great video thanks stay safe

  • @jasoncooper5265
    @jasoncooper52652 жыл бұрын

    That intro was EPIC!! "Overly engineered", LMAO!!!

  • @chuckmaddox6725
    @chuckmaddox67253 жыл бұрын

    I like adding powdered dye to my shellac to help color things

  • @TheLastPharm

    @TheLastPharm

    11 ай бұрын

    That's a pretty cool idea!

  • @Thunder_Dream_Designs
    @Thunder_Dream_Designs Жыл бұрын

    Looks cool. Not sure if it would work with a bench top drill press but ether way amazing and worth a try :)

  • @GeoFry3
    @GeoFry32 жыл бұрын

    Sweet

  • @davidclauson5256
    @davidclauson52563 жыл бұрын

    Well ok, your crazy!!! Lol. Great build!!

  • @tomhostetter8516
    @tomhostetter85163 жыл бұрын

    I'd buy your store bought table Travis. This is one ld like to build once I'm vack up and running again

  • @krzysztofb3025
    @krzysztofb30253 жыл бұрын

    Travis, this was the best dramatization I have ever seen🤣🤣

  • @mikejohnson3755
    @mikejohnson37552 жыл бұрын

    Great intro

  • @W4TRI
    @W4TRI3 жыл бұрын

    Got me and the wife some Keto bro! Thanks!

  • @doug0823
    @doug08232 жыл бұрын

    nice job. Always love seeing your videos. like the dust collection option and yes you always need that on the top suction as well. I did find it funny that your table saw looked like it's dust collection needed improving and you didn't have anything on your miter saw. lol. liked the triangular painting cones you used what brand were they? Also have you made the metal top for it yet?

  • @cliffgroce1492
    @cliffgroce14923 жыл бұрын

    Love the vids man and I’ll be building this soon… also, were you routing those dados backwards for the better video??

  • @mskulls83
    @mskulls832 жыл бұрын

    that intro! Hahaha

  • @stuffandymakes1648
    @stuffandymakes16483 жыл бұрын

    LOLOLOLOL!!! You are clearly the person who produces those “As Seen on TV” ads.

  • @purpleyams8738
    @purpleyams87383 жыл бұрын

    I saw this other design where the dust collection was through the fence. The hose attached on the end of the fence.

  • @collinsstudios7098
    @collinsstudios70983 жыл бұрын

    I added a caliper to mine instead of the stop thing so I have a digital readout of how deep I’m drilling!

  • @theclassicalcraftsman
    @theclassicalcraftsman3 жыл бұрын

    Next easy weekend project: zero clearance inserts for your table saw. Good work Travis.

  • @Jikktastic
    @Jikktastic3 жыл бұрын

    Sounds like Bourbon Moth voiced over the intro 😂

  • @genebowen497
    @genebowen4972 жыл бұрын

    "But wait! There's more" lol

  • @stevenmasterson5871
    @stevenmasterson58713 жыл бұрын

    Great video Travis. Really enjoy your humor and craftsmanship. What happened to your Rockler Dust Collection on your table saw?

  • @CD-hc5ds
    @CD-hc5ds2 жыл бұрын

    Just ran across your channel, nice build! I also like how you include most all the thing's your useing in the description with links. What hose are you using for your dust collection ?

  • @ou4138
    @ou41383 жыл бұрын

    Outstanding intro 🤣🤣

  • @PedroAlves-ee8vk
    @PedroAlves-ee8vk3 жыл бұрын

    Hello, very good job, salutations de Suisse 🇨🇭. A bientôt 👍👍👍👍

  • @ginageith3861
    @ginageith38616 ай бұрын

    I love all of your tips and ideas. Here's one for you: put a damp paper towel under your cutting board when cutting veggies and it won't slip around. Ha!

Келесі