Upgrade the Firmware on the PanelView
Ғылым және технология
In this video, McNaughton-McKay's Matt Conflitti, shows you how to create a USB drive to flash the firmware on your Allen-Bradley PanelView Plus operator interface product. You will learn how to download the firmware installation files from the Rockwell Automation Product Compatibility & Download Center (PCDC), install them, create the thumb drive, and finally upgrade the firmware on the physical terminal itself using the thumb drive. This video utilizes a PanelView Plus 6 terminal, however the same procedure can be used with a PanelView Plus 7 Standard or Performance model.
Website: www.mc-mc.com
Contact Us: 844-687-6262 or www.mc-mc.com/Locations
Subscribe on KZread: kzread.info/dron/7RQ.html...
LinkedIn: / mcnaughton-mckay
Facebook: / mcnaughtonmc. .
Twitter: / mcnaughtonmckay
Blog: www.mc-mc.com/roller/blog/
Our videos are made available for your convenience and we hope you find them helpful. Please note, however, that the information contained in the videos is subject to our disclaimer and should not be relied upon as professional advice or services. We cannot overstate the importance of reviewing the national electric code and any pertinent local codes for approved installation, use, storage and repair procedures and precautions; failure to do so may result in property damage, injury or death. Always consult with your professional advisors to determine the products to suit your intended purposes.
LEGAL DISCLAIMER:
The text, sound, graphic, video and other information and
materials made available on our website (including but not limited through our resources center and video center) or by us through KZread or any other social media platform (all such information and materials referred to as “our information”) are provided voluntarily by McNaughton-McKay Electric Company “AS IS” and “AS AVAILABLE.” “Information” includes any comments we may make on any website or social media platform regarding any video or other materials. Information may change at any time, and McNaughton-McKay assumes no responsibility to provide updates or revisions. McNaughton-McKay disclaims all express and implied warranties with respect to information and to the products described, including implied warranties of non-infringement, merchantability and fitness for a particular purpose. Applicable law may not allow the above exclusion of implied warranties, so the exclusion may not apply, but shall apply to the maximum extent allowed by law. McNaughton-McKay cannot and does not represent or warrant that information will be error-free, up-to-date, comprehensive or complete, or otherwise meet your requirements, or those of your customers or business partners. Your use of our resource center, video library and of information is further subject to our website terms of use. Please visit the website terms of use at www.mc-mc.com/TermsofUse.
Пікірлер: 28
Great video, thanks for posting this informative process.
@mcnaughtonmckay
4 жыл бұрын
Hi Jeffrey, We're glad this was useful for you. Be sure to subscribe to the channel to catch our latest Tech Support videos!
Great video. Keep it going.
@mcnaughtonmckay
4 жыл бұрын
Thank you for your feedback. We're happy to hear the video was useful to you! As you might already know, you can subscribe to our channel to see more videos like this as they're posted.
Muchas gracias, funcionó para mi. Saludos desde Chile.
@mcnaughtonmckay
Жыл бұрын
We're happy to hear this was helpful! Thank you for watching.
Great video. I just have a question, in one section of the video shows many servers you can install to the computer so, i would like to know which one of these showed could do the "share folder" function between the hmi and the computer allowing watching the folder from the pc?
@mcnaughtonmckay
Жыл бұрын
Hi Fernando, You will need to do one of the following. 1. Load the firmware onto a flash drive from your PC and then plug it into the PanelView to continue the process, or 2. Plug into the PanelView with USB C to establish a connection then upgrade the firmware from there. If you have further questions or concerns, please reach out to your local Rockwell Automation distributor for personalized support.
Great Video, thanks for learning to process. I ve a panel plus 700 and stay error in the inicialization error on check image.
@mcnaughtonmckay
3 жыл бұрын
Hi Marco, we recommend reaching out to your local Rockwell Automation distributor for personalized support. You will be able to communicate the error over the phone and work with a support technician to solve the issue.
Great video. Wouldn't you have to update the mer. project file version also ?
@mcnaughtonmckay
6 жыл бұрын
Hi Mike,Yes, you would also need to update the .MER file using the Transfer Utility. If you have any questions or concerns, please reach out to your local Rockwell Automation distributor for more information.
hello a question for the penel-view 800 7 hmi is the same function
@mcnaughtonmckay
5 жыл бұрын
Hello, Yes, you can upgrade the firmware on the PanelView 800 using the same steps as demonstrated in the video. Simply type in “PanelView” in the keyword search and select the PanelView 800. If you have any questions or concerns, please reach out to your local Rockwell Automation distributor. Thank you!
The panel view does not recognize the "autorun.exe" file on the USB stick?? PanelView plus 600 (regular) 2711P-T6C20D ser B
@mcnaughtonmckay
6 жыл бұрын
Digitronix BE, If your USB storage capability is more than 2 GB, that may cause the issue. You might also try deleting and downloading a new .exe file to ensure that the file structure is correct. If you have more issues please reference Rockwell Automation’s Knowledgebase at rockwellautomation.custhelp.com/app/home or reach out to your local Rockwell Automation distributor.
@fadhilsemi6044
5 жыл бұрын
For old version of panel view, use FAT32 USB
I just ran into a problem on which I have a corrupted firmware on a PanelView 600 compact but in my case there is a logo indicating the touch panel is disabled and wont allow me to do anything, there is a fault (red blinking light) but I'm not sure if I should pay an automation company to flash the firmware as the message on the screen is unclear I mean would flashing a new firmware solve my problem? the local disctributor didnt know what to do..
@mcnaughtonmckay
3 ай бұрын
Thank you for your question. Our recommendation would be to return the PanelView to Factory default and then try re-flashing the firmware. If this does not work, consider migrating to a currently supported solution. If you have any additional questions, please contact a local branch. www.mc-mc.com/LocationFinder
hello matt conflıttı 2.34 seconds in this video exit button on the screen how do I do?
@mcnaughtonmckay
4 жыл бұрын
Hello, The FactoryTalk View ME application shown in the Video: Soda Demo Overview is a pre-engineered FactoryTalk Faceplate that Rockwell Automation has developed. These are designed to reduce a customer’s engineering, design, and implementation costs. These faceplates at times are built-in to FactoryTalk View (Sample / Demo Faceplates). Other faceplates can be found here: Rockwell Automation Library of Faceplates and AOIs 62250 | Date Created: 06/15/2009 | Last Updated: 06/04/2019 Access Level: Everyone Download the Faceplate/AOI sets for FactoryTalk View ME and SE at the Sample Code Library website by searching for "AOI" or "Faceplates" in the Search by Product, technology,etc. box. The Faceplate and/or AOI downloaded will contain installation instructions:(nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.rockwellautomation.com%2Fglobal%2Fsample-code%2Foverview.page&data=02%7C01%7Cgreener%40mc-mc.com%7Cc6fd3b58ce8c4a66be5f08d74042a894%7Cc5d04ce6c38145a5bb151f1d4a5e6746%7C0%7C0%7C637048527354971885&sdata=ihi2%2BhUniF6k8gCz%2FEls9XShzXI6pD6qPj5lfsuuoXs%3D&reserved=0) If you have any further questions or concerns, please reach out to your local Rockwell Automation distributor. Thank you.
Mike, newer version of Panel View run older version of file.MER. For instance, a panelview version 5.1, you can download a file.MER version 3.1 without issue. Another question: Are the applications in the internal source DELETED/ERASED when you make the firmware update? ( If you make a firmware update in a PLC you lose everything! )
@mcnaughtonmckay
6 жыл бұрын
Roberto,The .MER file must match the firmware version in order to run properly. You can upgrade an old .MER file to match the new firmware using Rockwell Automation’s software, but you will lose all applications when upgrading the firmware on the PanelView. Please contact your local Rockwell Automation distributor for more information before upgrading if you are concerned about losing any applications.
how do i add more terminal types in the existing terminal type drop down, please help
@mcnaughtonmckay
10 ай бұрын
Hello, Firmware that is installed will show up in the ‘Existing Terminal Type’ drop down. In order to add more to the list, you will need to install the firmware for whichever PanelView you want added to the list. For more help or information, please reach out to your local Rockwell Automation distributor.
Great Video... Can you help me? When I try to install de FW V6.10 in mi PC pop ups an error with Firmware Upgrade Wizard Compatibility with de FTV Studio, Wich version is compatible with the 6.10FW?
@mcnaughtonmckay
7 ай бұрын
Hello, If you are looking to make any modifications to your machine, we recommend reaching out to your local Rockwell Automation distributor for advice. Here is the link for the Local Rockwell Automation distributor locator: www.rockwellautomation.com/en-us/sales/partner-locator.html