I'm following the tutorial, and have got to the point when I'm installing from the usb drive, it goes well up until it performs the first reboot, upon doing that the install just keeps looping from the point where you select the keyboard language and it doesn't get to the point where you can select a region/country :/

@IvanDPopov

2 жыл бұрын

There are quite a few tutorials on google that can help you get out of this loop, glad to see you got that far though!

@chilunliu

2 жыл бұрын

@@IvanDPopov thank you, I realised that the machine I have (ax005na) isn't capable of booting from the wwan port despite making adjustments to the bios boot order and upgrading/downgrading the bios. Instead I'm using a software boot loader called refind (had to load the files onto a usb flash drive), which allows the machine to see the nvme and boot from it. I've managed to get the Windows install to complete so again, thank you for the tutorial

@IvanDPopov

2 жыл бұрын

@@chilunliu awesome! Glad you got it working!

@IvanDPopov

2 жыл бұрын

I pinned this comment incase it helps other folks, thank you!

@brandonwinarchick6731

2 жыл бұрын

@@chilunliu I have a ax010nr and though I am still awaiting the arrival of parts, I fear I will encounter the same boot difficulty you faced. Once your install of Windows was complete, did you continue to require the use of the rEFInd bootloader usb drive or can the system now see the nvme natively?

This was painful to watch. Not because of the quality of the video or how the laptop was upgraded, the video and tutorial was incredibly good and I appreciate the easy to follow steps. This was painful because if Hp just made the laptop usable to begin with or put an SSD slot this video would be 14 minutes shorter.

@IvanDPopov

2 ай бұрын

98k people feel the pain lol

I'm very thankful, its been a great experience for a 63 years old. Its working perfect with win 11 on it. This is the kind of videos everybody should see to improve our knowledge before they kill right to repair. BTW One day you wont be able to change your electric car battery!. remember we are the resistance! keep up the good job

@IvanDPopov

2 жыл бұрын

Thank you very much sir! Very glad to help 🙂

@morenoglager

2 жыл бұрын

@@IvanDPopov oh it's running beautiful 😍

@table124

Жыл бұрын

Nice job mate I like this stuff too

Thank you for your efforts to make this out-of-the-factory eWaste actually usable

@IvanDPopov

Ай бұрын

Welcome!

Just upgraded my HP-14 with a Patriot P310 240 gig SSD. Great video. Thank you. I used Macrium Reflect, after installing the SSD, to clone the 64 gig eMMC. Worked like a charm. No need for Windows disks or install. Cheers. Just realized that you lose bluetooth as well as wifi, as both are on the card that was removed for the hard drive. I don't use bluetooth on this notebook as it is used for travelling, so no big deal for me. So just be aware of what you are losing when you do this. But gaining so much storage space was more important to me.

@IvanDPopov

15 күн бұрын

Glad it helped!

From México, Just upgraded an HP Stream 14-ax1xxx, 16GB RAM and a 256GB SSD, everything working perfectly. Thank u so much for the tutorial!

@IvanDPopov

Жыл бұрын

Excellent I’ll add it to the list!

@sandraar3036

Жыл бұрын

Hola, una pregunta. Me podrías decir dónde conseguiste el adaptador?

@carlos22222aasj

Жыл бұрын

@@sandraar3036 la mayoría lo compre en Amazon, desde los enlaces que aparecen en el vídeo

@jjackson5558

5 ай бұрын

Hello Which SSD and Memory did you use, pls

@madridgonzalo20

4 ай бұрын

@@sandraar3036Amazon

1 year later: Ivan's tutorial is wonderful and I got mine to work a year ago. It's not a beginner project but no soldering is required. Just be careful with the case disassembly and the delicate ribbon cable connector.

@IvanDPopov

Жыл бұрын

Thank you! So glad you got yours working

@BrewsterMcBrewster

Жыл бұрын

@@IvanDPopov One of the best video tutorials EVER!

Thank you Ivan for indulging my ignorance in getting this working. I am going to go to those posters and print out what they prescribed, I hope to repost with a thumbs up success. 👍AL

This is really kool vid. I have several laptops and one of my first buys was HP Stream and was using an External SSD to run Windows 11 via the USB and was really slow, even with 8GB's Ram as well as awkward having an external SSD dangling from the USB port or stuck on the lid with double sided tape. Already purchased an external USB WiFi adaptor, now all I gotta get is this gizmo and it''l be sweet. Thanks so much for this info, as been looking forever for this kinda vid to help sort this out, so thanks once again.

@IvanDPopov

Ай бұрын

Welcome!

You are probably the only one I met that got my account back seeing lots of people recommending you

@IvanDPopov

Ай бұрын

🎉

You're going to be the supreme expert on these machines! B-D

Thank you for the video, this is the exact m2 adapter I was looking for to put in another laptop and mini pc

@IvanDPopov

2 жыл бұрын

You’re welcome!

Worked great on my Stream 14 -CB164wm. Updated BIOS to the latest (either F.21 or 23, can't remember), swapped the 4Gb DDR4 for a 16Gb stick, installed the nvme adapter and a Intel 512Gb nvme drive, TPLink USB wifi adapter, set BIOS to boot from network, reinstalled Win 10 on the nvme (deleted the eMMC partition first) and no issues at all. Much faster with just the memory upgrade (tried it first before I did anything more) and with the nvme drive boots much faster. It'll never be a speed demon but at least it's not snail slow anymore.

@IvanDPopov

Жыл бұрын

Excellent! I’ll add that model to the list.

@murphyclophus

Жыл бұрын

What happened to the wireless card? He didn’t put it back

@frankmc4294

5 ай бұрын

@@murphyclophus OLD POST Unanswered Wireless card removed, replaced with adapter linked in description. SSD mounted on Adapter. Clone Old eMMC to new ssd. Set boot drive, inside BIOS, to boot from Network connection, this will now see the ssd rather than the old internal wifi card. It's just a location (Like the USB port) and dosesn't care what is there. USB WIFI aqdapter replaces the missing internal adapter.

@sur.geek333

5 ай бұрын

I have this laptop a friend wants me to upgrade . I see the max ram upgrade is 8gb . Does your system actually see the 16gb as usable ram installed? Thanks

@IvanDPopov

5 ай бұрын

@sur.geek333 yes it will but to make sure your question is fully answered kzread.info/dash/bejne/hmpsrtpuZ66egNo.htmlsi=pNNP4SOoKYaQuZvw

Succes on Model 14-cb172wm. BIOS F.18 Thanks for sharing this! Update: Rando test parts replaced with Crucial 500G ssd and 16G RAM. Also updated BIOS to latest F.22 and all is well. Thanks again!

@IvanDPopov

2 жыл бұрын

Awesome 😎 very welcome!

@davidcameron7642

2 жыл бұрын

This also works on hp 255 g5 model with network boot enabled.

This is the most helpful video I've found to upgrade my pos stream, thank you so much. I was able to upgrade to 8gb ram & 512gb hard drive

@benyblunco1

Жыл бұрын

I’m trying to get mines but it’s not recognizing my NVME can you tell how you did it I have 14-cb111

@IvanDPopov

Ай бұрын

Glad to hear!

Got it working on my ax0xx! A few things: the wifi card also controls Bluetooth, so I had to get a Bluetooth adapter along with the wifi one. I'm using Linux Mint, and for the life of me couldn't get the wifi adapter to work (1st one in your description). 8 hours later, after trying every driver I could find, I downgraded the kernel one version... And it worked. Lol Also had a helluva time trying to boot from the nvme. I don't think the bios supports it. But I could see it as a storage device and the Linux Mint installer let me install onto it. SO what ended up working was installing Linux Mint on the original drive, then in the GRUB menu I can choose to boot from the nvme SSD. I changed the GRUB settings to automatically boot into the new SSD. And now I have 500gb! Thanks for the video dude!

@IvanDPopov

Жыл бұрын

Oh nice, way to transform a windows stocking stuffer into the master race of computers! Lol 😂

Soy de Perú y compré todo en Amazon, gracias por la explicación, salió todo excelente , gracias Saludos desde Perú 👍🏼👍🏼👍🏼

thank you very much from Mexico it works for me on laptop hp stream 14- ax1xxx very good contribution bro you are the best

Hello Ivan - First thank you for posting this upgrade. It would have been nice to be told by HP that you were wasting your money with these laptops due to it tiny capacity. I did everything save for taking my Streamer out of S mode, which didn't concern me the extra stuff on Windows. My model is ax010ds. I verified every step. I took screen shoots of what appeared on my streamer which matched exactly what came up on your video. When I loaded Windows From the USB I created from the Microsoft website, it loaded exactly like your video. I deleted the 32G partition and then choose the NMVe to load Windows onto. I choose NEW and it went find. It began the windows process all the way through to completion. But instead of loading the windows it rebooted back to loading Windows 10 again. I removed the USB and restarted the Streamer. What I got now was "Boot Device Not Found - Please install an operating system on your hard disk - [3F0] " I used F2 and ran diagnostics and the storage device passed. I went to BIOS and enabled Legacy and attempted to load the system again. It came back "no boot device found." I reset BIOS to default and tried again; no dice! I reloaded windows from the USB to see if the NMVe was still showing, it was. I can see the NMVe partitions and 2 - 32g partitions. I'm at a loss what to do. I am considering unplugging the NMVe and seeing if I can load to the 32g internal drive, to see if the BIOS will recognize it. I don't know if I should delete the 32g and see if the NMVe will work. I had ungraded the BIOS for my system to v61. It was working with no issues with the NMVe installed. There is a new BIOS just issued v62. I've downloaded it to a USB, but not sure if I should load it? If you have a Patrion account, I'm happy to remunerate you for your help to get it functioning. There is another poster called "Tundra Time - HP Streamer Upgrade" that was able to get his functioning by using RefiNd. I don't quite get how that was accomplished. Perhaps you are aware of his post. He gave you PROPS for how to do the initial install and parts needed. However he wasn't successful loading like you did is my understanding. I await your reply. I am a subscriber. Thank you for reading and replying.

@IvanDPopov

2 жыл бұрын

Read the pinned comment string on this video it should help with that model

@antonlugo9479

2 жыл бұрын

@@IvanDPopov Thank you for the reply but... What pinned comment are you referring to exactly? Forgive my ignorance since this is the first time I've ever done anything like this. That includes making a comment on KZread. I looked at the original pinned comment that list the parts, etc. Is that where I find the steps necessary, or somewhere else in your post? Maybe I need my hand held more so than others here. Like I wrote to you in my original post everything went well just like your video, until I loaded Windows OS from the USB. It went fine till the OS loaded but after that it just kept repeating the loading sequence. After pulling out the USB all I get is that no boot drive can be found. If you can bare with my repeated query and indulge me some more specifics I'd appreciate it. I have subscribed as you requested, before you requested it. Thank you in advance of your reply. Hope you had a great Fourth of July. Anton

@IvanDPopov

2 жыл бұрын

@@antonlugo9479 if you open up the comments section of this video you will see one is pinned from a user “chilun liu” in which he goes over some software he used to make it work on your model (or a model with similar issues) if you go through the whole comment tree of that post there are some other users that expanded on that solution and improved it for a permanent solution :)

@IvanDPopov

2 жыл бұрын

@@antonlugo9479 Kamron Kimbrough has an elegant solution from that comment tree, specifically

Thank you for the tutorial, everything worked like a charm .

@IvanDPopov

Ай бұрын

Glad to hear!

Excellent tutorial, very didactic, works perfectly

@IvanDPopov

Ай бұрын

Thank you!

Finally after 7 yrs it's in my recommendation

@IvanDPopov

Ай бұрын

🎉

THANKS!!!1 Works great on HP stream 14-cb159nr. I actually had bad 4GB RAM, so 8GB fixed that issue. Also i used Ediloca EN605 1TB M.2 SSD, NVMe1.3 PCIe Gen3 x4 SSD Internal Hard Drive, M.2 2280 - Read/Write Speed up to 2150/1850 MB/s - Internal SSD.

@IvanDPopov

Ай бұрын

Glad to hear!

i will check my hp stream model and i will messaging you back im be try to upgrade mine for years sir thanks for this great vid

"You made it!" (To quote Ivan Popov!) I did it! With your excellent video tutelage, I triumphed, prevailed, succeeded and otherwise overcame all of HP's attempts to thwart me from upgrading this overgrown smart phone. I think the earlier problem may have been that I didn't seat the connector of the adapter to the NVME socket very well. Works now! WOO HOO! Thanks, man! I Most Certainly would never have even THOUGHT about doing this without your video! IT CAN BE DONE! Like Arne Saknussemm said in Journey to the Center of the Earth: ""O daring traveler, you'll make it to the center of the earth. I've done so." HP Stream 14-cb161wm. BTW, I use a Patriot Memory P300 256GB Solid State Drive instead of the ADATA. They went up $10 ($46) probably due to you, my friend. Everyone is trying it. Everyone is buying it. I feel great! Maybe the coffee helped ;-) TO Others: The hardest part for me was getting the dang thing apart!

@IvanDPopov

2 жыл бұрын

Congratulations! 🎉🎊🎈🍾

@LustigesDeutschland

2 жыл бұрын

what adapter did you use?

@IvanDPopov

2 жыл бұрын

@@LustigesDeutschland adapter link is in the description

@IvanDPopov

2 жыл бұрын

@CLAUDIO ZECCHINO adapter link is in the description

@cameronx2170

2 жыл бұрын

@@IvanDPopov it’s outta stock

I have model similar to this and its really helpful when your old laptop only got 32 gb emmc and is showing signs of failing soon

@IvanDPopov

Ай бұрын

Indeed it is

@BONTIOE

Ай бұрын

@@IvanDPopov is there a video on making the bios boot into nvme rather than the emmc

@IvanDPopov

Ай бұрын

@@BONTIOE to do that look for the boot order part of the bios and set the nvme first

@BONTIOE

Ай бұрын

@@IvanDPopov thanks

Tysm, did everything as described

I followed your example and I helped a student update their HP Stream, so thank you! Do you know if this would work on the AMD A4 version of this laptop? I've got another student who wants to improve his as well

@IvanDPopov

2 жыл бұрын

I checked the specs, it’s using ddr4 2133 ram so that seems to be upgradeable, and it has an m.2 wifi slot like the other one, no bios updates available though so you’d have to try and see if it works without it but it does say the wifi is upgradeable so it’s possible it comes stock without an active FIT and could work, glad to hear you were able to help a student! Best of luck let us know how it goes!

@armandolopez180

2 жыл бұрын

@@IvanDPopov Update: the AMD A4 version will definitely support 16 GB of RAM, but the SSD install is not possible! This particular computer downclocked a 2400 mhz module to 1866, and I forgot to see if I could fix that in the BIOS, but at least we know it can handle 16 GB​. As for the SSD, there is a heat pipe coming from the heatsink right where the SSD would go, which means there's just not enough space. Even if there were, you'd be putting an SSD right on top of a heat pipe, which would be bad news. As far as storage goes, it looks like your best bet is to configure a fast SD card as internal storage.

Hola desde Mexico, pude upgradear una Laptop HP Stream 14-CB164wm con 16gb de memoria y 256gb de disco, el adaptador lo compre de Aliexpress y aunque es diferente al que recomiendas funciono muy bien, solo recomiendo usarla con base enfriadora porque tiende a calentarse, no exagerado pero si algo Thanks so much for the Tutorial, it helped me to upgrade this machine!!!

@estebancutini

10 ай бұрын

Hola cual es ese adaptador que decis ? Gracias

@nahuelpereyra3527

6 ай бұрын

Hola buenas, como se llama el adaptador que le pusiste? Aca en argentina sale muy caro el adaptador que recomienda en el video y hay otras opciones mucho mas baratas que no cuenta con ese flex.

@IvanDPopov

Ай бұрын

Very welcome glad it worked!

Great video! I shall try this on mine!

@IvanDPopov

Ай бұрын

Thank you!

i love your video, thanx man.

@IvanDPopov

Ай бұрын

Welcome!

Thanks for the info very much, i have a question, I wanted to upgrade to a 1tb hard drive and a 8GB RAM would i be needing anything else for th hp stream 14 inch to work properly.

@IvanDPopov

2 жыл бұрын

As long as it fits you should be fine, the adapter will handle the max space needed for a 1tb I believe, you can do 16gb on it as well

Thank you, this help so much I'm sure to share th

its hard to find just simple detailed help. Most of the computer videos you need a master doctorate computer degree to understand. Stay in school kids Thank you for takimg the time to make

@IvanDPopov

Ай бұрын

Welcome!

Did it speed up the laptop and make it functional? I bought 2 of these for school kids and they were SO SLOW and basically unusable. They now are in a box in the storage room. But if $100 will make them faster and actually function, I'll do it. Still cheaper than a chromebook. But it they still suck (they have the celeron processor) then I won't waste my time. I would appreciate it if you told me about how much performance improvement you now have. Thank you.

@IvanDPopov

2 жыл бұрын

It’s quite a bit of a performance boost, on average your stock emmc hard drives (if not full) will run between 150-250mbps read and write speed max, the fuller they get the slower they will run, and ram will bottleneck any heavy applications like photoshop etc. with the upgraded ram you’ll see better application handling and with the ssd hard drives over a pci-1x connection you’ll have 450mbps and above on average read and write speeds, with the added space you’ll keep those speeds too as long as the kids don’t clutter up the ssds.

Hi - Love your Video - I have a HP Laptop Model 14-dg0001TU with a eMMC Hard Drive that has totally failed - "No Storage Installed" when I run the Diagnostic Test - Do you think it would be possible to install a M.2 with the adapter without another installed Hard Drive? The rest of the System Passed all the test just the Hard Drive was not found- It does not show up in the BIOS either - Thank you Annabel

@MrWJRDS

2 жыл бұрын

hi man, sorry for my bad english, i'm from brazil. i had the same problem in my stream 14-cb011ds and i solved it by update my bios. Install a windows in a external HD and update the bios from there. My eMMC memory just worked after that. Hope i helpd you.

@IvanDPopov

2 жыл бұрын

You technically don’t need the emmc to install the nvme, yes update the bios and then reset your cmos by unplugging the battery for a bit after installing

Hey man, great video. Quick question for you. My Stream is model 14-cb0xx. From what I'm seeing the same process should work. However, my BIOS is F.55 and on HP's site they have absolutely ZERO drivers or software. The built in HP Support scanner says no available updates. Best guess, should I be good to go with this version of the BIOS?

@IvanDPopov

4 ай бұрын

Most likely, the CB models seem to have no issues pretty consistently without the need to update bios, intel RST drivers may be needed for the setup to see the nvme drive

hey man, awesome vid but i have a question, is it possible to upgrade the chipset as well because i have the HP Stream 14 cb174wm and that has the Intel Celeron N4000 and i plan to upgrade the RAM to either 8 or 16 GB and put in a 250 or 500GB SSD hard drive along with modules as well as the chipset (Intel Core i3 or i5)

@IvanDPopov

2 жыл бұрын

The chipset is micro soldered in place you’d have to replace the entire motherboard I think

@andrecard3934

2 жыл бұрын

@@IvanDPopov ok thanks for replying

I upgraded with these recommended parts on a AMD A-4 Stream 14DS0020DS. I opted for a 16gb RAM stick, which was recognized easily. The processor on this model has a heat sink with a long heat pipe that extends over the space behind the battery pack, and fills up the area where the author placed his m.2 drive. So I had to secure my m.2 drive to the battery pack, it allows enough clearance for the bottom cover and the m.2 sits right beneath the large center vent. This model has very little tweakability in the BIOS. There is no ability to update BIOS. I simply enabled the “network boot” option and then rearranged the boot order to have network boot be first in line. I started with a fresh windows boot USB, and Windows found and I formatted the m.2. So, the Stream 14 is no longer a useless brick with 32gb eprom. I now have a decent laptop for all the basics that actually has some elbow room. 16GB Ram, 256GB m.2. Technically it has everything needed to run Win11, including the security boot on the AMD chip, but so far, the A-4 isn’t on the MS list of approved processors. Maybe that will change. Thanks to the author for this upgrade. I was about to recycle this $200 waste of money. Now it may get a few years of useful service.

@IvanDPopov

2 жыл бұрын

That’s a good idea with network boot and something I forgot to mention I think! Good work!

@Ivan Popov I have a HP STREAM 14-cb174wm So, I have a question. Can I upgrade my RAM and give a HDD in this laptop as you have done in this video. With these steps.

@IvanDPopov

2 жыл бұрын

I think most CB models should work check your bios you are looking for F20 and under for the upgrade if available

@shatiakter1419

2 жыл бұрын

I think SSD is best.

@shatiakter1419

2 жыл бұрын

Most people uses SSD too much

Hi Great video hoping to use it to upgrade my notebook however the bios is f.61 and won’t downgrade, any help to downgrade bios r will be appreciated.

@IvanDPopov

2 жыл бұрын

F61 and f16 are not the same bios family there is no downgrade for it, so you will have mixed results, check the pinned comment for a possible solution to it though good luck 🍀

I noticed that the TP-Link AC600 USB wifi adapter gets pretty hot therefore the whole area around it gets a little hot too. Did you notice the same thing on your end and if so has it caused any failures yet?

@IvanDPopov

2 жыл бұрын

It used to get pretty hot but that stopped eventually, weird stuff for sure, it initially had intermittent connection issues but that also stopped, ghosts?

Hello, I have the HP Stream 11.6 inch version of this same colour. I was wondering whether it was possible to upgrade the ram on that model? Thanks.

@IvanDPopov

2 жыл бұрын

Most likely yes just make sure to match up speeds and types of ram, I would open it up first carefully to make sure it’s removable

@Melodyixo

2 жыл бұрын

@@IvanDPopov Thanks so much for your reply, I shall take a look to see if it’s upgradable:).

For anyone that is having problems not seing the nvme ssd appear in device manager or disk manager. I had that problem and for some reason, unplugging then replugging the battery fixed the problem. So if you wanna save yourself some trouble, unplug the battery before removing the wifi card and installing the ssd.....

@IvanDPopov

2 жыл бұрын

Indeed, this resets the cmos for hardware listing

Awesome video tutorial. I have the HP Stream 14-cb120ds. Would this work on my model as well? I'm interested in upgrading the CPU Intel Core i5 3470 @ 3.2GHz / AMD X8 FX-8350 @ 4GHz; GPU NVIDIA GTX 660 2GB / AMD HD 7870 2GB; RAM 16GB; HDD 72GB + 8GB for gaming purposes.

@IvanDPopov

Ай бұрын

Cpu is soldered on and there is not gpu slot so this would not work outside of storage and ram

Hello, I need to know if I can put a msata ssd instead of an adapter for nvme ssd. I have a hp stream 14 amd version and I don't have space for an nvme . is the adapter really necessary?

@IvanDPopov

Жыл бұрын

Msata “looks” similar plug wise but it’s different with the channels it uses and won’t fit, yes you do need an adapter to make it work unless you can find an a/e pinned m2 ssd

Hi Ivan, I have a Hp Stream 14-ax000na and have followed the tutorial but got stuck in the windows 10 installation loop. I already tried to remove the pen just before rebooting but when I do it says “Boot Device Not Found. Please install an operating system on your hard disk. Hard Disk (3F0)” I also check the Boot order and settings in the BIOS and it is fine. Do you know what possibly could be?

@IvanDPopov

2 жыл бұрын

Check the pinned comment above for this exact issue :)

Hello, I made this change on my HP Stream 14-ax014nl that I had abandoned and now it's great. I wanted to ask you if it's normal that it doesn't update the Bios anymore. Thank you

@IvanDPopov

2 ай бұрын

Yea sometimes it helps sometimes it doesn't even need to be done depending on the model, if it works it works :)

I only did the RAM upgrade, but I am getting the BSOD on boot with stop code IRQL_NOT_LESS_OR_EQUAL. I am using the Samsung M471A1K43CB1-CRC 8 GB module with BIOS F.18 Rev.A (the latest available from HP). Any ideas?

@IvanDPopov

2 жыл бұрын

Ram stick could be bad or the wrong type perhaps?

@vultureal793

2 жыл бұрын

@@IvanDPopov do you think that ram could work with hp stream laptop 14-cb172wm?

Hello, I have an HP STREAM 14-ax0XX, I would like to know if I can just replace the eMMc memory with an SSD. And what difficulties could I face during the process?

@IvanDPopov

2 жыл бұрын

Check the pinned comment, replace no it’s soldered on but add to and disable yes.

@joabehinode

Жыл бұрын

Pedro vc conseguiu fazer a atualização, pois eu tenho 1 hp igual ao seu HP STREAM LAPTOP 14-a0XX,

Thanks for the video ! I did it on my 14-ds0004nf, works fine but, i have issues with the wifi adaptator. It works at the beginning but if i putt it off the laptop once, and plug it again, then it's not recognize anymore. The wifi adaptator becomes a cd-rom device... dont know what to do (i tried changing drivers it s not working)

@IvanDPopov

2 жыл бұрын

That’s awesome that the upgrade works for you! As for the wifi adapter, ours worked a little funny at first too but not as you described, ours just dropped connections once and a while, it’s possible you got a bad wifi adapter or some bent pins inside, the device will enumerate as a cd/dvd when installing drivers automatically, so perhaps in device manager uninstall it then try to plug it in a different port (we use the SS usb slot) www.dell.com/support/kbdoc/en-us/000123568/realtek-usb-3-0-ethernet-adapter-is-enumerated-as-a-cd-rom-device-after-installing-windows-when-using-mdt-or-sccm

@yvesdarves3497

2 жыл бұрын

@@IvanDPopov it was the wifi adaptator that made the whole thing bug !!! i changed it and everything is fine now !!! thanks again

I actually have a question, so I have a hp steam 14 and I want to upgrade the ram and storage. Ram being 16gb and storage being 500. If I add the storage do I have to use the SIM card creation thing to re install windows or can I just reinstall windows and call it good without anything?

@IvanDPopov

2 жыл бұрын

If you want to install windows on the ssd (which I recommend, it’s faster) then the usb media creation tool is best since it will give you the most up to date version of windows and streamline the boot disk setup, less work all around :)

I have the HP Stream 11-ak0xxx (according to my "About device specs," on the bottom of the laptop it says model # is 11-ak0035nr). Would this work on my model as well, do you think? I'm interested in upgrading the storage/memory.

@IvanDPopov

2 жыл бұрын

h10032.www1.hp.com/ctg/Manual/c06328250 check out page 9, looks like you have an m.2 slot that takes pcie lanes so in theory it could work, there was a recent bios update which might allow you to upgrade the storage, support.hp.com/us-en/drivers/selfservice/swdetails/hp-stream-11-ak0000-laptop-pc/24170647/swItemId/ob-271526-1 it’s worth a shot and if all else fails just return the parts that don’t work, let us know how it goes! (Make sure to get DDR3 ram if you do that)

@IvanDPopov

2 жыл бұрын

There’s been a development with this model check the pinned comment

Currently trying to get this to work on one of the supported models but windows installer won’t recognise it. 😢

@IvanDPopov

4 ай бұрын

Install the RST driver during setup www.dell.com/support/kbdoc/en-us/000132969/how-to-load-intel-rapid-storage-technology-driver-to-install-os-on-nvme-memory

hello, thanks for the info. I want to ask a question. I was wondering if I plug the small size m.2 nvme ssd directly instead of the wi-fi card, will it work? that is, if I don't use the apparatus you use. Its size is exactly the same as the wi-fi card, 22×30 mm.

@davidcameron7642

2 жыл бұрын

no it will not work must use the M.2 A+E Adapter.

@venceremos5044

2 жыл бұрын

@@davidcameron7642 thank you for the answer.

@IvanDPopov

Ай бұрын

No you need the apparatus

Will certain parts on HP Stream 14 cb1xxx fit like a SSD and RAM I'm pretty sure that the BIOS update will work

@IvanDPopov

2 жыл бұрын

I believe this video is in fact for that model amigo.

I tried to do the upgrade, but nothing is working at all. I followed the instructions presented in the video. I purchased everything that was in the description of the video and its still not working.

@IvanDPopov

3 ай бұрын

What model laptop do you have and at what point do you reach failure?

Just to be clear - when doing this, you no longer have Wi-Fi unless you use the USB adapter?

@IvanDPopov

10 ай бұрын

Yes you use the internal wifi m2 slot for the ssd, you’ll need to grab a mini usb wifi adapter

Please could you add below a link where to get the m2 adapter please? Thanks a lot.

@IvanDPopov

2 жыл бұрын

Links to the parts are in the description sir.

Wow you can upgrade this computer I thought it would be like almost every cromebook but with win 10 and this computer can upgrade to win 11

@IvanDPopov

Ай бұрын

It’s pretty great

I have a CB-172wm. It won't recognize the new SSD (it also doesn't like the new RAM.) I tried unplugging the battery and draining the capacitors, but I get a CMOS error. Either I need to update the bios (HP's website advised no updates available) Or the laptop isn't seeing the SSD because I already initialized the SSD. Is that possible? I'll see if I can verify if it's an error related to the BIOS. BIOS version is F18

@IvanDPopov

Ай бұрын

Depending on what you initialized the drive as that is possible I believe you want MBR or it might not see it, check you connections, and make sure your cpu doesn’t require rapid storage drivers during windows 10 install

Hey! Im trying to find info regarding the model 14-CB012DS because Im bidding for one on eBay and I want to know If I can upgrade the ram on that model. I think the ssd is a no go but ram boost will help definitely

@kevinteixeira2718

2 жыл бұрын

the model has the BIOS update f.61 A... do you think it will work? I only care about the ram because Im planning on just using an sd card for storage expansion

@IvanDPopov

Ай бұрын

2 years later, yes up to 16gb per channel

Sorry I'have ax011 I have install win 11 but when the pc restart I have errore 03f no boot device. I do the network adapter in bios. Have you a solution?

@IvanDPopov

2 ай бұрын

Check to make sure that you have the boot order correct in the bios, you want your ssd to be first, double check your ssd connections are tight and that the laptop body has spacers and isn’t bending it

Great upgrade path!. However I chose a different path got rid of Windows all together. I installed Intel Clear Linux OS optimized specially for blazing fast performance of all chips Intel such as network, graphics cpu ect. Basic install eventually ended up around 12 Gb after updates and is lightning fast with the original 4Gb ram. One setback was Firefox browser is a big fail on Clear Linux any type of video media from the various social platforms an KZread does not play for some reason but installing the Brave Browser fixed all it all media works perfect in Brave.

@IvanDPopov

Ай бұрын

Linux is a great option!

Ivan, do you think this "Kingspec" drive would work without having to use the adapter? KingSpec 256GB 2242 PCIe 3.0 NVMe M.2 3D NAND SSD Solid State Drive- Internal SSD (NE-256) Thanks for a top notch tutorial! Really good, really clear and detailed! I subscribed.

@BrewsterMcBrewster

3 жыл бұрын

Just answered my own question. No, It won't. Wrong connector configuration.

@IvanDPopov

3 жыл бұрын

@@BrewsterMcBrewster yessir you are correct in your second comment, need an a/e m2 configuration

@BrewsterMcBrewster

3 жыл бұрын

@@IvanDPopov You really are The Man! Thanks for replying even though you didn't have to. You're a class act! Much Love!

@BrewsterMcBrewster

3 жыл бұрын

I just finished ordering all the parts you listed and am going to do surgery next week when they arrive. I'll have your video right in front of me. Don't take it down! :-)

@IvanDPopov

2 жыл бұрын

@@BrewsterMcBrewster no I don’t think you are hosed quite yet, when you install windows you want to install it on the ssd not on the old smaller hard drive, so before you do that you have to have the hard drive installed, and initiated via partition manager, fresh ssds come disabled usually, so steps would be bios update>install ssd>initiate ssd 20:00 >install windows on ssd. I upgraded my two laptops to f18 and it works just fine, keep in mind, f18 on a pavilion (that topic) vs a stream (your laptop) are two very different bios

Hello, I have a hp stream, I did everything you said in the video, but the bios version that appeared on my model was F61 not F16, I don't know if it will be because of that bios, but it does not recognize the new ssd as a boot disk , Do you have any idea how to fix it? Thanks!!! greetings from Argentina

@IvanDPopov

2 жыл бұрын

You have a different model of stream 14 it may not work for you

Will any upgrades work for the cb171wm? And what’s the max ram upgrade I can do?

@IvanDPopov

2 жыл бұрын

You can definitely get the ram to upgrade at 16gb, there’s a comment below that tested a higher speed and it worked too, as for the hard drive I have not seen anyone get it to work so far but if you want to get all the parts and mail it out to me I’ll give it a try

Can I still do the things exactly the same just change the ram to 16 gb and the storage to 1tb?

@IvanDPopov

2 жыл бұрын

Absolutely

I remember reading somewhere that we can replace the wifi card with a mini M.2 PCI-e NVME (therefore not needing an adaptor). Is this correct and if so could you suggest a compatible model?

@IvanDPopov

2 жыл бұрын

If you can find an AE keyed nvme you definitely can

@pichagi

2 жыл бұрын

@@IvanDPopov Thanks for the response. Any idea if they exist?

I'm new to this a have the hp stream 14 AMD a4-9120e laptop, I'm wondering if this upgrade will work thanks a lot

@IvanDPopov

Ай бұрын

I’d definitely look up a tear down video before taking it apart but if you have the space and the same m2 a lot I’d say it should

I want to do this and upgrade but I dont know where to buy like that adaptor , Any suggestion pls?

@IvanDPopov

11 ай бұрын

Check description for links

would any ssd that fits in the adapter work? for example would Kingston work or is it mandatory to be this one.

@IvanDPopov

Ай бұрын

It can be any ssd they should all have the same form factor

Hello I have a hp stream laptop running on iOS 11 and i cant find the bios update utility. Is there another way I can do this and do I need to do this step in order for it to work. I gut got all of the items i needed for the install I JUUST CANT GET PAST THE FIRST STEP

@IvanDPopov

2 жыл бұрын

You can give it a shot without updating the bios, what’s your stream model?

Thanks for the info and your swift response. I have HP stream 14-ax0XX and my BIOS is Insyde F.08. My question is can it work with this bios (F.08) as there's no update available for my BIOS. Thanks

@IvanDPopov

2 жыл бұрын

I’m my experience stock bios won’t work but it’s worth a shot let us know how it goes!

@BadBigBruce

2 жыл бұрын

@@IvanDPopov First thanks for the video, been looking to save that laptop from the garbage. Now, I have install the ssd no problem, updated the Bios, now using the F.61 Rev.A from that model, but I'm stuck on boot loop. Tried removing the boot usb a few second, tried install several time, still stuck. Any idea? should I try the bios version from your model? would you know where I can download it? that version doesn't seem available on HP site anymore.

@kpkacts238

2 жыл бұрын

@@BadBigBruce Also couldn’t get the BIOS to recognize the NVME SSD on Rev F.61A. There are several different older BIOS versions available to download but I didn’t see one that matches the exact same as the one in the video F.16A. Also couldn’t get computer to let me downgrade the BIOS to an older version after trying. For now, it looks like I’m trying to come up with a solution using the refined boot manager.

@IvanDPopov

2 жыл бұрын

Check the pinned comment there’s been a development with the ak models

@IvanDPopov

2 жыл бұрын

@@kpkacts238 check pinned comment

Hi sir, I have hp stream 11 db060sa model laptop. Will this method works in my laptop??

@IvanDPopov

2 жыл бұрын

Idk if you’ll have the room inside for it

I have the " hp stream 14 " model ' AXOXX 7265-NGW ', CAN IT BE DONE THE SAME WAY? BECAUSE MY LAPTOP ONLY HAS 27GBS OF STORAGE AND 8GBS MEMORY.

@IvanDPopov

Ай бұрын

Find a tear down video for that mode before attempting, if the wifi a lot is an m2 a/e and you have the space you should be good

Thank you its work for me

@jchristianbertrand7544

Жыл бұрын

the bluethoot its not working any recommandations

@jchristianbertrand7544

Жыл бұрын

i orderded a new usb wifi+bluetooth hope its works

@IvanDPopov

Ай бұрын

Glad it worked and yes you will need a Bluetooth/wifi adapter externally

Ivan I did everything you showed me but I’m using the 14-cb111wm and I’m having a problem because the new driver is not showing up on my file explorer can you help me

@IvanDPopov

Ай бұрын

You either have to initialize the drive or install rapid storage drivers during setup of windows 10 depending on your cpu, also make sure your connections are good on the drive

Hi Ivan, I am actually trying two different things on my hp 14-dk0010ca. This laptop had an unsoldered m.2 nvme socket...tried soldering one into the board...didn't detect my crucial p2 250 gb nvme...still goofing around with that. As a backup, I bought the sintech adapter and installed it in place of the wifi card...however my crucial m.2 which should give me 1/4 th of its rated speed of around 2500 MB/s is only giving me 190 MB/s which is around the same speed as my old emmc...any ideas whats wrong ? Bad sintech adapter ? Bad NVME drive ? I currently have I gb of ram and I cloned my old emmc using acronis into the nvme

@IvanDPopov

2 жыл бұрын

Make sure your nvme has no pressure on it and see the pics in description about spacers, bad connection will bsod and crawl

@naumansm3

2 жыл бұрын

@@IvanDPopov Hi Ivan, thanks a lot for the super prompt reply and sorry it took me a while to get back...was night time my end here (Asia)...actually in my laptop there was room in between non conductive surfaces with plenty of space so there wasn't any pressure. The only three possibilities that come to mind are 1. Bad ssd (crucial occasionally uses qlc instead of tlc), 2. Bad adapter or 3. Speed throttling at pcie port via motherboard (I have a pcie 3.0 but a bios utility reported some ports were running at maybe pcie 2.0...not sure if that's possible). No 3. might be likely since I tested the drive in a USB adapter (10 gbps capable) and I got 380 MBPS read and write though that's still lower than the ~500 MBPS on usb 3.0. I will try the drive in some other computer to eliminate possibilities. Thanks again, Nauman

I have hp stream 14-cb0xx but I don't fully understand it. I wonder if the disk in this computer is ssd or emmc? If emmc, is there a possibility to install ssd on this computer? Thanks.

@IvanDPopov

2 жыл бұрын

Yes indeed that model is very close to this tutorial which is what it’s all about :)

@venceremos5044

2 жыл бұрын

hello, thanks for the info. I want to ask a question. I was wondering if I plug the small size m.2 nvme ssd directly instead of the wi-fi card, will it work? that is, if I don't use the apparatus you use. Its size is exactly the same as the wi-fi card, 22×30 mm.

Sir i have a question is hp stream model 14-DS0020NR upgradeable?? Or not lmk ty in advance

@IvanDPopov

2 жыл бұрын

I haven’t tried it with that one check your bios version and specs of your wifi card, needs to be pci-e compliant with an a/e m2 port

Hello Sir, Will this method works if I upgrade my ssd if there is a fault in keyboard? Because there is a fault in keyboard in my laptop. Then if I upgrade that will it work as usual? Will a problem occur?

@IvanDPopov

Ай бұрын

Keyboard faults are generally a hardware issue so most likely will not fix it

Friend, can you find this adapter on aliexpress? I'm confused about the ads.

@IvanDPopov

Ай бұрын

It is on amazon

A bit late to the party but a couple of questions. I know enough to be dangerous around computers! Would like to try this on my HP Stream 14-cb103CA . My computer indicates I'm not in S mode so I skipped that step. Problem is I can't get past the next step on the BIOS update . Went to the HP site to Identify product and once I get the software/driver response , there is only one driver available ( some kind of Windows 11 informational program ) . Current BIOS is Insyde F.14 2020-06-11 Ver 3.0 UEFI. I'm going to guess this means I won't be successful in updating the memory? Does this mean my model has a different motherboard? I did recently do a regedit to stop Windows 11 update requests . Could that be the issue? Thanks for any assistance

@IvanDPopov

5 ай бұрын

Yea different mobo probably different hardware someplace so different bios, you don’t necessarily need to update it as long as the installation sees the ssd, if it does not try installing the intel rst vmd drivers during the install file: drive.google.com/file/d/1lqCLrlqNV1Zrnkl1JjWvWIDMHCmd1S0z/view?usp=drivesdk Tutorial: kzread.info/dash/bejne/oHmarpaSd8nZeqQ.html

@bdhslittleshopofhorrors

5 ай бұрын

Update on the CB103-CA. Props to Ivan! Based on Ivan’s very informed (and timely) response , I thought I’d go ahead and give this a try . I primarily use the computer for Zwift and the dropped connections were driving me nuts. Issue might have been just the 4GB RAM but since I was going to open it up and I was down to 4GB usable on the hard drive , I figured there was nothing to lose by trying since the parts are relatively cheap. The short answer is Ivan’s awesome tutorial worked perfectly for my machine ( I see there was at least one other posting requesting info about the same machine so here you go! ). Notes as follows: 1) My laptop was never in S mode so that was easy once I figured out I didn’t have to do anything! 2) I could not find an updated BIOS but the M.2 adapter seems to be working just fine with the BIOS noted in my first comment. 3) The biggest pain was the boot disc. You need at least 8GB free to create the disc , Windows won’t show the USB drive you want to use until the 8GB are free. Took me awhile to figure that out. 4) The WIFI adapter I used is a bit bulky and makes using the adjacent ports difficult . I’m cycling in the basement so I wanted the best adapter possible, probably would have been okay with the less bulky one. 5) Broke some of the back case clips using what I thought was Ivan’s method, I would probably be a bit more care and use a spunger along the back by the hinge. 6) check your case before starting , if it's bulging , you likely need a new battery. I took the case apart three times looking for reasons why the case wouldn’t snap back together in the middle before the light went on. Battery seemed to work fine but was swollen. Add another $50 to the rebuild! 7) Not sure if there is anything that can be added to the tutorial regarding restoring data from your old drive . I created a backup but I was unsuccessful in getting it reinstalled. I wonder if there is any way you could pull the info from the old disc before you create the scratch disc . 8) it took some time to reload Windows ( I think I ran a total of 3 updates ) . Keep checking for updates because they don’t all appear right awayIf you can’t find hardware drivers, look under optional updates.I use an ANT++ dongle to connect my trainer and took bit to find that driver. Parts list as follows: Patriot 16 GB RAM - www.amazon.ca/dp/B07QQWDXXJ?psc=1&ref=ppx_yo2ov_dt_b_product_details Kingston 500GB SSD - www.amazon.ca/dp/B0BBWJH1P8?psc=1&ref=ppx_yo2ov_dt_b_product_details Sintech M.2 A/E adapter -www.amazon.ca/dp/B07DZF1W55psc=1&ref=ppx_yo2ov_dt_b_product_details TP-link AC1300 WIFI adapter -www.amazon.ca/dp/B07P6N2TZH?psc=1&ref=ppx_yo2ov_dt_b_product_details Thanks again for the great tutorial .

@IvanDPopov

5 ай бұрын

@@bdhslittleshopofhorrorsawesome! I added your model to the list thank you for that very detailed write up.

excelente video, yo tengo un problema ya que no me reconoce el ssd

@IvanDPopov

4 ай бұрын

You’ll need the RST driver, follow this tutorial, you can get it from there or from intel via google www.dell.com/support/kbdoc/en-us/000132969/how-to-load-intel-rapid-storage-technology-driver-to-install-os-on-nvme-memory

Is there another tour type of adapter to retain Wifi instead of mini usb Wifi?

@IvanDPopov

Ай бұрын

Not unless you maybe get a splitter for the adapter or a different kind but any usb wifi chip will work too

I inserted the adapter with the SSD but it is not detected by the PC what should I do? a thousand thanks

@IvanDPopov

2 жыл бұрын

Check your model number, see if it matches the tutorial or listed in the description, try a cmos reset by unplugging your battery, or see the pinned comment for a possible workaround

I did everything you said but even if windows is installed on the ssd the pc can't boot it and repeat the windows installation everytime. It seems like it can't boot windows from ssd. Are there any solutions for this problem?

@IvanDPopov

11 ай бұрын

If your windows install is looping you might have the boot order for USB first in your bios and depending on your model you might have to do the workaround in the pinned comment chain, try taking out the usb after shutting down when it goes to the install again

Hi there Ivan, Just wondering if that laptop of yours has 2 slots for RAM, and how much you'd recommend me to get, I have a similar HP Laptop (HP 14s-fq0020na) crucial says that I have 1 slot available and the used slot has a 4GB RAM Samsung M471A5244CB0-CTD fitted onto it, it states that I can install 32GB maximum of RAM, I'd appreciate it if you can help me as I'm not really a techy kind of guy, many thanks, and by the way, the video was amazing 👍

@IvanDPopov

2 жыл бұрын

So that’s a bit of a loaded question lol, but first of all thank you. Ram limits depend on the cpu ram bus controller, what it can handle per channel, if you have an 8th generation cpu in that model (which is possible for that model) you can potentially put 32gb into a single slot if you only have one slot www.bhphotovideo.com/c/product/1588330-REG/crucial_ct32g4s266m_32gb_ddr4_2666_mt_s.html/?ap=y&gclid=CjwKCAjwtfqKBhBoEiwAZuesiJHse5oDcE7envDD4uG3yppqez7LZmOFlOHFEKeCh9G6uqhOUJsodxoCRj8QAvD_BwE&lsft=BI%3A514&smp=y If you have another slot you could potentially put two of those guys in there for 64gb The best way to figure out your maximum ram available to install on your system based on cpu, OS, motherboard etc is to follow these steps geekzag.com/guides/computers/check-maximum-ram-capacity/

@unacknowledged3537

2 жыл бұрын

@@IvanDPopov Thank you!

Can you change the cpu on it, or did you change it in the video and I just didn’t recognize it?

@IvanDPopov

2 жыл бұрын

Cpu is not upgradable it’s soldered onto the mobo

Basic question on why add the M2 rather than swap out the hdd, is that even possible on this model??

@IvanDPopov

Ай бұрын

Hard drive is an emmc chip that’s soldered on, you can technically swap it but you need some serious tools

what adapter do you place the Wi-Fi card with

@IvanDPopov

2 жыл бұрын

TP link nano ac600

Would a HP Laptop 14 Cb185 work with this upgrade?

@IvanDPopov

Жыл бұрын

I think most cb models carry similar hardware so perhaps, check your bios version first and if you have a m2 wlan card

i can get it to install perfectly, see's my new 500Gb every time but will never boot to it i've set network adapter as the default UEFI options, i've tried with and without secure boot and legacy on and legacy off and every other option i can think of but no dice , anyone got any ideas? thanks

@IvanDPopov

Ай бұрын

Might be rapid storage drivers perhaps? Is it on an intel cpu?

I just wanna know if this will help me with gaming and editing performance

@IvanDPopov

2 жыл бұрын

Depends on the games/programs, but I do use after effects on mine at times without much trouble

Does this ecample can be applied to hp stream 13?

@IvanDPopov

2 жыл бұрын

That depends on a lot of things I including date of manufacture and type of stream model, I would cross reference the specs of the tutorial model and yours especially with the wifi card port and see if you can’t open yours up to see if you have space to do it all

I have the 14- cb172wm if I just want to upgrade the ram to 8gb I still need to do all those steps?

@avielaisrael422

2 жыл бұрын

Using the ram from the description box

@IvanDPopov

2 жыл бұрын

No you can just do the ram part and then re-assemble, no need for bios update if you aren’t upgrading the ssd

I tried putting In a 16 gb ram and it's not turning on. I'm not seeing alot of answers for what I should do.

@IvanDPopov

2 жыл бұрын

I’d try putting the old ram in first see if that works, make sure you ground yourself on something metal first to get rid of static, 9/10 times it’s not seated right or the speed is incorrect perhaps? Did you get a 16 gb single channel or is it dual as in meant to be part of a 32gb

@Ivan Popov what type of kit do u use to open the computer

@IvanDPopov

2 жыл бұрын

Electronic pry set, widely available locally, not the automotive one though

@tahjeretubbs4746

2 жыл бұрын

@@IvanDPopov what type of screw driver did u use beacause i didnt get one with my sintech or my electronic pry set

@IvanDPopov

Жыл бұрын

@@tahjeretubbs4746 it’s just a small screwdriver for like glasses kits or small electronics

HP Stream - 14-cb116ds ;The ram memory is soldered?

@IvanDPopov

2 жыл бұрын

Ram is not soldered