dude at 6:08 did you skip a couple steps? it would’ve been good if you showed how to connect everything to the new headlights… it’s kind of an important part of the install lol

@76Ef

2 ай бұрын

It’s literally just a plug

nice video...as per usual!!!

@mrgcc

10 ай бұрын

Thank you so much bro ❤️🙏🏽

@netlity5532

10 ай бұрын

​@@mrgccdid you align the lights afterwards? I hear a lot of people say the stock lights from vland headlights is pointing downwards

🔥🔥🔥

@mrgcc

11 ай бұрын

Thank you 😁

Did you have issues with the high beams? mine were pointed down and adjust with the low beams

Do these fail MOT because of the amount of light change compared to normal golf mk6 lights?

@MrGCC did you align the lights afterwards? I hear a lot of people say the stock lights is pointing downwards

@505premoto

16 күн бұрын

Yes, exactly. Ours point down. Either I have to find a fix or ditch them as driving at dark is dangerous.

@nickdreher4227

7 күн бұрын

@@505premotopush the top three screws on top of the headlight mounting back as far as they can go. There is also adjustment screws inside the housing itself, you’ll have to take it apart. The external adjustment screws don’t do the job.

@505premoto

6 күн бұрын

@@nickdreher4227 Much thanks!

@tristanbott3804

2 күн бұрын

@@nickdreher4227top three screws?

@nickdreher4227

2 күн бұрын

@@tristanbott3804 that’s what I said. There are three T25 screws that hold the top of the housing, and one behind the housing. Loosen the top three, push the headlight further back. The mounting brackets on the housings have wiggle room.

Having a problem we’re my DRLs don’t turn on until I put low beams on. Then my low beams don’t turn on at all. Any ideas on what could cause this? Can’t get help anywhere, thanks for the great vid man.

@johnnythegreat4205

3 ай бұрын

Did you figure it out? Having the same problem

@t0ov550

Ай бұрын

for the day time running lights, you have to swap the headlight pins in the harness from 10->4->1 and the DRL's should work

@sergiochavez7530

29 күн бұрын

@@t0ov550 do you mean move 10 to 4, and 4 to 1?

Can you tell me how to dissabke the red eye feature i have the red eye one and vland is completely useless trying to help me

@belinskiniko

5 ай бұрын

he bought the non red eye version . red eyes dont turn off

Do the bulbs from the old headlights fit on the new headlights? Or did you have to get new bulbs ?

@mrgcc

10 ай бұрын

Old bulbs can work but I would recommend upgrading them to brighter ones that are white to match the look.

@mahmoodrahman1288

10 ай бұрын

@@mrgcc did it come with any bulbs or no?

@MrArpiD

10 ай бұрын

What bulbs did you buy? Xenon or led bulbs? And also what siZe pls?

@harismehmood7127

9 ай бұрын

@@mahmoodrahman1288no does not come with bulbs

@t0ov550

Ай бұрын

@@MrArpiDh7 headlight bulbs for low beams and h15 headlights bulbs for high beams

Is it true DRL notification on the cluster panel stays on all the time? Regardless if headlights are on or not?

@t0ov550

Ай бұрын

Yes unless you swap the headlight pins in the harness from 10->4->1 and clear the code on obd

Were there any lights on the driver display saying anything was missing. I've heard some people will install the lights and then the dash says the car's lights don't work even tho they were on.

@kid_carlos

4 ай бұрын

bro that shit happens to GTIs even with the stock lights in 🤣

@t0ov550

Ай бұрын

Yeah for the day time running lights, you have to swap the headlight pins in the harness from 10->4->1 and the DRL's should work, but the side markers will only come on with the headlights. And to get rid of the dash light you just have to clear it with an obd device

what the name or link for the harness because i been trying to find one but i can’t

@t0ov550

Ай бұрын

Look up vland mk6 golf/gti headlight harness adapter

What size bulb for the brights?

@t0ov550

Ай бұрын

H15

No error codes from the drl?

@mrgcc

10 ай бұрын

nope it didn't bring up any which was great news!

@carmelopalella5213

4 ай бұрын

​@@mrgccio ho montato i fari uguali , ma quando giro il quadro non si accendono le drl e mi dà errore , ha solo la funzione posizione , cosa ho sbagliato? Grazie

@t0ov550

Ай бұрын

for the day time running lights, you have to swap the headlight pins in the harness from 10->4->1 and the DRL's should work and then you have to clear code on obd

@t0ov550

Ай бұрын

@@carmelopalella5213 you have to swap the headlight pins in the harness from 10->4->1 and the DRL's should work and to get rid of the dash light you have to clear the code on obd

Mine didn't come with low beams. Also the daytime running lights only work when the car isn't on. When it's on you have to switch to your regular low beams and then the DRL's will work too. Also error on dash saying DRL's not working. I have the harness and all. Disappointed with these lights.

@lucksenm151

3 ай бұрын

Did you buy low beams. If so where did you get it?

@thomasgranville3604

3 ай бұрын

@@lucksenm151 I would advise against purchasing these. The lower end Vlands that are around $220 don't get! You have wiring and harness issues. They don't work as you'd like. They are pointed to the ground, adjustment screw doesn't bring it high enough. And yes they didn't come with low beams. I'm actually returning mine.

@lucksenm151

3 ай бұрын

@@thomasgranville3604 did you then buy the high end headlights from vland?

@t0ov550

Ай бұрын

@@thomasgranville3604 You have to buy the bulbs separately which are H7 for the low beams and H15 for the high beams and for the day time running lights, you have to swap the headlight pins in the harness from 10->4->1 and the DRL's should work, but the side markers will only come on with the headlights.

@t0ov550

Ай бұрын

⁠@@lucksenm151low beam bulbs are any H7 headlight bulbs