unverferth 2500 Renegade toolbar ...made by blue jet .. nice toolbar - but quality control and fit and finish are poor
Жүктеу.....
Пікірлер: 34
@53antelope Жыл бұрын
You should dp an updated equipment tour. Always enjoy your videos.
@Blackearthexcavationandtiling
Жыл бұрын
At some point I'll have to for sure ...thanks very much for watching!
@scotta626 Жыл бұрын
Nice toolbar ! Hopefully you didn’t get one that was made on a Friday afternoon. 🤣 Always appreciate your attention to the fine details about the equipment and explanations. Great videos!
@Blackearthexcavationandtiling
Жыл бұрын
Thanks very much!
@damonellenson7736 Жыл бұрын
Great video again thank you for sharing your knowledge….
@Blackearthexcavationandtiling
Жыл бұрын
Thank you very much for watching
@ahabeger Жыл бұрын
I lived across the road from an IH / Case IH dealer... Remember seeing most new tillage equipment arrive like flat pack furniture from Ikea and get assembled by the local mechanics or the owners son.
@Blackearthexcavationandtiling
Жыл бұрын
Oh yes for sure .. most is set up by the dealerships ... this is one of few items made thats factory set up...
@TheFarmingLife Жыл бұрын
The joys of purchasing new equipment. I don't think I ever had a piece of equipment that you couldn't just take to the field without doing some adjustments. Thanks for sharing have a great evening
@Blackearthexcavationandtiling
Жыл бұрын
Exactly .. us either ... always something to adjust .. but adjusting is one thing, and completely having to redo because they made no attempt is another ... for what this thing cost, it should be way better set up and finished than it is .... workmanship was severely lacking on this one .... disappointingdisappointing.... but well get it, eventually..... sometimes easier to just buy something that's already been set and up and used a little .... hope harvest is going well ... thanks for checking in
@timharmon458 Жыл бұрын
thanks for the video.
@Blackearthexcavationandtiling
Жыл бұрын
Thanks for watching
@9410RJohnDeere5 ай бұрын
Are you able to run a single tank, since it has 2 feed lines or do you always have to pull side by sides
@Blackearthexcavationandtiling
5 ай бұрын
Yes you can run just one ... just keep the valve shut off on one of the feeder lines. .. both feeder lines went to a Y that went into the super cooler
@jimmystrain883 Жыл бұрын
What are you going to put out Anhydrous or liquid fertilizer that is a nice tool bar
@Blackearthexcavationandtiling
Жыл бұрын
Anhydrous.... thanks!
@farmermo4464 Жыл бұрын
Do you still have the 1050 fendt? Oh and nice Haggie.
@Blackearthexcavationandtiling
Жыл бұрын
No lease expired ...it went on to a new owner in northern Iowa .... thank you!
@kolewiebensohn Жыл бұрын
I still like my old DMI tool bars and a lot of guys like the CaseIH ones which are pretty much a red painted DMI. Didn't know unverferth made a tool bar.
@Blackearthexcavationandtiling
Жыл бұрын
It's actually a blue jet ...they either bought out or made a joint venture with bluejet .... we ran DMI for used (red one) ...and in our tough clay, we had a lot of problems .. finally they updated them and they held up better to the edge bent shanks ...... good to hear from you! ...how's crops over your way? - we had a 50 year drought here - terrible conditions....
@kolewiebensohn
Жыл бұрын
@@Blackearthexcavationandtiling we had a drought too but everything managed to yield up to par, we just got a 3 inch rain thank god, but it won't be enough to offset the drought. Need a snowy winter to say the least to bring back some moisture.
@Blackearthexcavationandtiling
Жыл бұрын
@@kolewiebensohn that stinks.... sounds like a lot of areas got roasted this year..... wow, that's a good drink ...only 1 inch here ... sounds like a cold dry and possibly early freeze out ... hopefully better year next year
@kolewiebensohn
Жыл бұрын
@@Blackearthexcavationandtiling we can only hope as that's all we have left I guess, can't change the weather. But no more rain and wind for a week would be good so we can get our new shed we're building finished...
@nickbell1955 Жыл бұрын
New Hagie??
@Blackearthexcavationandtiling
Жыл бұрын
New to us ... good eye! ..... I'll have a video on it soon
@bobhomestead7396 Жыл бұрын
What happened to all the skilled workers? We may be in trouble.
@Blackearthexcavationandtiling
Жыл бұрын
No kidding! Sad
@sealevel1919 Жыл бұрын
I bet they didn’t find any imperfections in that check y’all wrote for it.
@Blackearthexcavationandtiling
Жыл бұрын
Lol.... actually haven't paid them yet ..and probably won't until they get it fixed (resolved)
@jamesbreault5762 Жыл бұрын
You maybe need to send it back and send them to your u tube channel for making it right
@Blackearthexcavationandtiling
Жыл бұрын
Haha ...that would mess with them for sure! ....🤣 ........ we like the toolbar - but feel the fit and finish quality are lacking ... but we'll get it straightened out eventually
Пікірлер: 34
You should dp an updated equipment tour. Always enjoy your videos.
@Blackearthexcavationandtiling
Жыл бұрын
At some point I'll have to for sure ...thanks very much for watching!
Nice toolbar ! Hopefully you didn’t get one that was made on a Friday afternoon. 🤣 Always appreciate your attention to the fine details about the equipment and explanations. Great videos!
@Blackearthexcavationandtiling
Жыл бұрын
Thanks very much!
Great video again thank you for sharing your knowledge….
@Blackearthexcavationandtiling
Жыл бұрын
Thank you very much for watching
I lived across the road from an IH / Case IH dealer... Remember seeing most new tillage equipment arrive like flat pack furniture from Ikea and get assembled by the local mechanics or the owners son.
@Blackearthexcavationandtiling
Жыл бұрын
Oh yes for sure .. most is set up by the dealerships ... this is one of few items made thats factory set up...
The joys of purchasing new equipment. I don't think I ever had a piece of equipment that you couldn't just take to the field without doing some adjustments. Thanks for sharing have a great evening
@Blackearthexcavationandtiling
Жыл бұрын
Exactly .. us either ... always something to adjust .. but adjusting is one thing, and completely having to redo because they made no attempt is another ... for what this thing cost, it should be way better set up and finished than it is .... workmanship was severely lacking on this one .... disappointingdisappointing.... but well get it, eventually..... sometimes easier to just buy something that's already been set and up and used a little .... hope harvest is going well ... thanks for checking in
thanks for the video.
@Blackearthexcavationandtiling
Жыл бұрын
Thanks for watching
Are you able to run a single tank, since it has 2 feed lines or do you always have to pull side by sides
@Blackearthexcavationandtiling
5 ай бұрын
Yes you can run just one ... just keep the valve shut off on one of the feeder lines. .. both feeder lines went to a Y that went into the super cooler
What are you going to put out Anhydrous or liquid fertilizer that is a nice tool bar
@Blackearthexcavationandtiling
Жыл бұрын
Anhydrous.... thanks!
Do you still have the 1050 fendt? Oh and nice Haggie.
@Blackearthexcavationandtiling
Жыл бұрын
No lease expired ...it went on to a new owner in northern Iowa .... thank you!
I still like my old DMI tool bars and a lot of guys like the CaseIH ones which are pretty much a red painted DMI. Didn't know unverferth made a tool bar.
@Blackearthexcavationandtiling
Жыл бұрын
It's actually a blue jet ...they either bought out or made a joint venture with bluejet .... we ran DMI for used (red one) ...and in our tough clay, we had a lot of problems .. finally they updated them and they held up better to the edge bent shanks ...... good to hear from you! ...how's crops over your way? - we had a 50 year drought here - terrible conditions....
@kolewiebensohn
Жыл бұрын
@@Blackearthexcavationandtiling we had a drought too but everything managed to yield up to par, we just got a 3 inch rain thank god, but it won't be enough to offset the drought. Need a snowy winter to say the least to bring back some moisture.
@Blackearthexcavationandtiling
Жыл бұрын
@@kolewiebensohn that stinks.... sounds like a lot of areas got roasted this year..... wow, that's a good drink ...only 1 inch here ... sounds like a cold dry and possibly early freeze out ... hopefully better year next year
@kolewiebensohn
Жыл бұрын
@@Blackearthexcavationandtiling we can only hope as that's all we have left I guess, can't change the weather. But no more rain and wind for a week would be good so we can get our new shed we're building finished...
New Hagie??
@Blackearthexcavationandtiling
Жыл бұрын
New to us ... good eye! ..... I'll have a video on it soon
What happened to all the skilled workers? We may be in trouble.
@Blackearthexcavationandtiling
Жыл бұрын
No kidding! Sad
I bet they didn’t find any imperfections in that check y’all wrote for it.
@Blackearthexcavationandtiling
Жыл бұрын
Lol.... actually haven't paid them yet ..and probably won't until they get it fixed (resolved)
You maybe need to send it back and send them to your u tube channel for making it right
@Blackearthexcavationandtiling
Жыл бұрын
Haha ...that would mess with them for sure! ....🤣 ........ we like the toolbar - but feel the fit and finish quality are lacking ... but we'll get it straightened out eventually
Hello! Lack of quality is a "no go"...
@Blackearthexcavationandtiling
Жыл бұрын
Hi 👋 .... for sure!
@luisnunes7933
Жыл бұрын
@@Blackearthexcavationandtiling 👌