I was looking at the machine a couple years ago and had my mind set, but as I was studying more about CNC, I learned one of the biggest factors between Hobbyist Machines and Commercial machines is rigidity. I ended up saving up a tad more and went with the Onefinity, also because at the time I could only find videos about Long Mill being put out from 1 user, good to see more people buying the machine and producing content. Though you have to build it from scratch I think that assists in learning how the machine functions and sure comes in handy when troubleshooting issues because none of these hobby machines come without issues :)

@jkwwoodworks

Ай бұрын

Hi there and thanks for commenting. I was dead set on a Shapeoko a couple years ago and never even heard about this machine. When my wood mentor ask me to start looking for a machine, I found tons of videos on the long mill. I'm glad I waited to get one. We loved the fact we could customize the table and make our own. You are absolutely right about understanding the machine since we built it from scratch. There was a lot of good that came from that. It was also a pain in the butt sometimes too since CNCs were new to us. Could you tell me your thoughts on the Onefinity machine?

@phrozen4life

Ай бұрын

@@jkwwoodworks I went with OF primarily because They have the option of the Rolling Stand & Frame. I am limited on my shop space and needed a way to get the space back when not using it. Though it takes 2 people to lift, lock the legs and roll away, it is really convenient way of storing it when not in use. The other thing that I like is the ability to start out at the basic and upgrade packages allow you to move from the Build Botics with ridged Axis on 3 different sizes up to a much more ridged X-Axis, High end Stepper motors and Masso Controller and Screen putting you the closest to commercial as possible. There is also a large amount of support for the machine, and They cater to 3rd Parties allowing for the Lasers to be mounted to any of their spindle mounts, offering 2 different sizes of mounts so when Ready you can swap out the Makita Router and move on to an actual spindle for the machine etc. Allot of room to grow with Solid tubular steel axis's. I like that as most of my projects consist of working with expensive Hardwood. Glad to hear the Long Mill is getting a following though, it just wasn't there a couple years ago, and if Price were my biggest objective and getting the best possible for the 2K Mark I totally agree the Longmill fits that bill.

@jkwwoodworks

Ай бұрын

@phrozen4life thanks for your reply. That makes a lot of sense. I know there are a ton of different machines on the market and I am glad you found one that fits your needs. I think the best thing about this community is we are all trying to help each other. I appreciate you letting everything else know about the Onefinity. It sounds like a solid machine that may be better for someone if shop space is their biggest obstacle.

I have an older long mill version. The laser attachment is nice. I already have co2 laser. So I don't think I will upgrade. And I'm happy with my MK1. I did add linear rails right after I built it. For me it's a fine machine. I don't use it 8 hours a day. I do use it for my business in conjunction withe my 3d printers, co2 laser, standard electric and hand tools. I'm glad I bought it. That was many years ago. It is nice to see improvement on the design.

@jkwwoodworks

29 күн бұрын

They have made several improvements and it's great to see the company so enthusiastic about their products.

Cheasy mill tbh, after messing around with CnCs in school and the ones my friends have like the onefinity and the one i built from 3D printed parts.. Id rather build if its less than 6k. Anything over 6k might as well spend a little more for a more ridged machine from a good company.

@jkwwoodworks

29 күн бұрын

That's awesome that you built one! It was challenging building the Long Mill. Ultimately, I'm glad I did because I understand what makes the CNC tick. Thanks for watching!

@cpace123

29 күн бұрын

Don't be fooled. I have an older version, and it ok, and I used to work in a machine shop where we have the huge big machines. it would not replace those of course, but for a hobby or small business it's really nice. Not your only option, but I would not say cheasy. I

@jkwwoodworks

29 күн бұрын

I would agree. It's not the best machine on the market. But it's a decent machine.

A lazy way of cutting stuff out for the weekend warrior of wood working. Doesnt show woidworking skill or talent.

@cpace123

29 күн бұрын

There is still a lot skill required in designing, programming, cut speeds. Don't be fooled into thinking running a CNC is easy. I still use hand tools, and standard electric tools for my wood working, but a CNC has been nice on occasion, and if you need to replicate certain things faster for a business this really is agood tool. I'm older, but never stop trying to learn how to use new tools, and add them to my shop. I will never stop learning. It keeps the brain young. But that is just me. I can see no using any new tools also and becoming a total master at doing things 1 way. And using the brain the learn new ways of doing thing I don't think is lazy. Just to be fair here. I have learned lazer cutting, building,3d printing, screen printing anything that can solve what I am trying to invent or make.

@timlist4173

29 күн бұрын

@@cpace123 all computer skills, carving with a knife is real skill.

@markm49

6 күн бұрын

@@timlist4173aww - someone’s feeling threatened….