"Unsplitting" the Tractor | Farmall 856 Restoration Episode 9
The Farmall 856 restoration continues. In this episode, I install a new teflon rear main seal on the engine and install a new clutch (pilot bearing, throw out bearing, pressure plate, and driven disk). Finally, I "unsplit" the tractor, bolting the front and rear halves together.
For Farm / Channel merchandise: farmfocused.com/just-a-few-ac...
-We do not offer farm tours or accept visitors
-We do not sell from the farm
-We do not ship our farm's products
-We do not sell live animals
To order Pete's book; "A Year and a Day on Just a Few Acres:" www.amazon.com/Year-Day-Just-...
Пікірлер: 447
Just a general update. Our farm life this winter is basically 3 tasks over and over: doing basic chores twice per day, bedding the cattle once a week or so, and cleaning the pig pens. I will have very little to cover regarding the pigs until probably May, when we know whether they are pregnant or not. Billy is going in with Brownie this week. We have seen nothing between Billy and Bossy in terms of breeding. Frankly, I am looking forward to saying goodbye to the pigs after this spring's litters (if there are any). They have been a frustrating headache over the past few years, and I would have parted with them last fall if not for viewers' wishes to keep them. From then on, we will be buying 4 feeder piglets every spring to raise outside, and converting the pig barn into a new brooder house for broiler chicks. So pig content on the channel will not end entirely. Finally, I have been racking my brain trying to come up with farm content, but there's just nothing going on right now aside from me making videos of those 3 things I listed, which was what the last 3 farm videos consisted of. I used to make topical winter videos about small farm life, but I have no ideas there, and I seem to get more and more pushback about expressing opinions and talking too much on camera. I guess that's a function of the state of things in general. Maybe I just need to recharge my batteries regarding animal content to come back strong with it in the spring. I look forward to manure spreading season in 6 weeks or so, bringing the cattle back out to pasture, and getting into fieldwork with the equipment. Videos with action going on are fun to make and more interesting to watch, at least in my opinion. If you have any interesting farm topics you would like me to cover, I would love to hear them!
@RH-cv1rg
3 ай бұрын
While it is nice you consider viewers comments, you will never please the masses. Do what you want to do and the viewers will come along with you. The ones that disagree will move on to pester other content creators. Have a good day Pete and don't stress the youtube stuff.
@jeffreyjohnson8212
3 ай бұрын
Thanks for the update! BTW, I’ve always enjoyed your topical videos, think-pieces, etc., etc….but, understand the “pushback.” Your channel will always be a “watch every episode” one for me, no matter what the content is! Thanks for taking the time to share your days, projects, & perspectives!
@JustaFewAcresFarm
3 ай бұрын
@@RH-cv1rgThank you. That is the philosophy I have been following with this tractor series. I am enjoying it and it is easy to make videos about it.
@Pigpen1202
3 ай бұрын
I agree and like watching what you post.
@marknunya3035
3 ай бұрын
If I have said once oh well. You can please some of the people some of the time all some but rarely all all of the time so let your haters be your motivators and know that we enjoy you and your take on this experience. With that said thank you for being you and as always good luck and God bless..😊😊
Hi Pete and Hilarie great to see you two together in this video...always a pleasure watching what you do best ,doing what you love!! Amazing channel!! God Bless you
Ok, had me freaking out on the pressure plate bolts.
Gonna be a much better tractor than you can purchase brand new today . That tractor will serve you AND your children well in the coming years!
Who else belly laughed at 8:57? I love his happy disposition when things dont go to plan.
Not only is he working on rebuliding the tractor, he's annotating the work to us, and he's on his back! You need a "That was kinda Easy" button!
the wee noise at 9:00 just made my day, thanks Pete another fantastic episode!
Thank you, Pete. It's great just how you do it. This is your farm content. This is how real-life days on the farm are. No acting, no scripts, and no faking. This is the true and real content I live for every day.
I'm 77 now, never did anything like this, and actually clapped in my old age home, to see the joy on your face, and the accomplishment you have done so far. really enjoy your videos. I've been watching your channel since you moved there and limed the fields.
Another great episode. I enjoy watching you identify a problem that can be solved by a tool you created. Also it’s a near perfect way to learn the capabilities of your farm machines. My wife and I look forward to every video you upload. 👍🏻👍🏻
I like all your videos tractors, pigs, cows, chickens repeat. It’s nice listening as you explain how and why. Why I don’t know it’s just very interesting hearing and watching about a TA and tightening down bolts on or near the flywheel. I have a much better appreciation of what mechanics do after watching you work and seeing all the steps. It would be nice to see the animals even if briefly but it’s your call. Enjoy it all. One last thing… I enjoy your philosophical spots as well. They give me ideas to reflect on. I have never been even the slightest bit offended. Keep up the awesome job!
This is not exactly ASMR but listening to Pete chat about installing tractor parts is just SO satisfying, soothing, and calming!
I’m absolutely loving this series. I’m a wrencher myself and even though I will most likely never work on an 856, it helps me hone my critical thinking skills. Thank you Pete!
Pete I have watched your videos for years don't change a thing they are all interesting and you don't talk to much keep em coming.
Looking forward to watching all the episodes I’ve missed during the last year
Can't lie Pete, but you are a impressive Man. I would love to be able to break down a engine and put that sucker back together. One of the 1st channels I started following and and still like to this day.
I enjoy any video you and Hillary put out. For some reason the tractor rebuild ones are both relaxing and entertaining. When I was a kid my grandpa’s machine shed had a distinct grease smell from his Farmall tractors. That smell comes back to me sometimes when you’re doing tractor work. Thanks Pete.
When the clip went flying I figured that s going to be a long day finding it, Nice job again Pete
Pete, I’ve never took a tractor a part or wanted too. But watching you I’ve learn some stuff. 1. Know your limits. 2. Have patience. 3. Pay attention to the small details. And 4. Have a sense of humor. The plus in your video is your calm approach to the task. Thank you for the interesting content.
Like I commented before, get your farm buddies to talk about the old days. Use video and pictures of the old times in your part of the country. Love your videos. Don't give up.
Now I know how you can remember all those parts and where and how they go. It's a learned procedure! Me, I have spare parts from 50 years ago. See ya next week.
I tell you this guy is really awesome, I can watch him for hours. Thanks again Pete.
Good Sunday morning Pete and Hillary what a fine Sunday to spend the day watching episode#9 of the 856 restoration!!!!
Very satisfying to see the two halves come back together. Lots of good pointers for this kind of work that apply to many different vehicles.
Would like to see more of how y’all accept new chicks and how y’all address issues that come with caring for and treating any problems that come up
You are doing a great job on the videos Pete, keep it up! I really enjoy the tractor restoration.
Nothing better than waking up on a Sunday morning and find a new video from Pete. Needless to say it made my day. Thanks Pete.
Dang, that's some impressive attention to detail for the subscribers that caught that absolutely impressive great work to the person that caught that!!
It's very calming to watch a patient mechanic. Now that you're onto the fun part of the restoration it must be hard to contain excitement. We will all feel your sense of pride once we see you operating the tractor in its new condition.
Akways a good time when I'm hanging out with Pete and one of his tractors.
Perfect workman ship and so much patience, always amazed at how calm you stay, ON CAMERA 🤣🤣
I'm still amazed at how simple you make it seem to get ALL THOSE DANG parts back together. This has been an amazing series and I look forward to watching more.
I find it amazing how the rubber seals wear steel on the cranks. Talk about perseverance.
i love your tractor rebuild series. The patience you show is a lesson in itself. Thank you for doing this and I hope to see many more in the future.
Thanks Pete! Honestly this is one of those this that I may or may not in the future do if I hadn’t watched this series. That’s a big undertaking and intimidating when getting that far in the weeds with something so big and complicated. We appreciate you and thank you for the education.
You say you hope it's been interesting for me? You bet, this has been a great series of tractor rebuild so far!! Love your explanations of each part and or step. Thank you!!
I really enjoy the pace of your videos Pete. It’s very calming and therapeutic. 😃
We have followed you with a rebuilds of tractors and we are still amazed at your talent and explanation of working parts and your patients. Regarding the “ talking to much “ on your videos , well we love it and it’s new learning for us and you can never be to old to learn ! Thank you very much for taking the time .
Well i gotta tell you, this project sure is interesting to me Pete. Always interesting to see the inners taken out and put back in right. Really excited to see the final reveal. And to see the tractor out working again. Thank you Pete for sharing this project with all of us.
@brentbosworth8845
3 ай бұрын
Yes, I love all your videos that you take the time to share with us.
A great start of a Sunday. First church then one of your videos. Thanks for letting me watch.
Thanks for taking us along the journey. I enjoy whatever you post. Keep being you. Continued luck on the 856 project.
Always a pleasure, Pete. Your video is my "before getting ready for church" time.
You have convinced me I'm not cut out to be a mechanic.
Looks like you have some Farmall repairmen who watch your videos Pete to catch your very very rare mistakes and correct you that's great unlike most us armchair mechanics and curiosity watchers. Great job most of us could not or should not do.
Thanks Pete! I love the tractor segments!
Really enjoying this project. Takes my back to the 70s when I helped my uncle separate his 856 to replace the clutch and pressure plate assembly.
Really enjoying this series Pete. All your content is A1 in my book. Keep being you, pay no mind to the peanut gallery.
For those who complain about the "talking" videos, they can gladly go watch something else. There's plenty of faux homestead channels featuring rich people cosplaying as farmers. For me personally, I came across your channel, looking for advice about the reality of financing a homestead. Pete had a couple of videos where he went over the stark reality of what it takes to keep a farm going. Those first couple of videos suckered me in, as I was very impressed with how he crunched the numbers. From there, I got really interested in his cattle videos, and now, I'm subscribed and enjoy all his content. Pete is honest, straight to the point, and very enjoyable to listen to. I might go as far as to say, the "Bob Ross" of hobby farming.
Pete any video from you is always much appreciated, you a living a life that probably many of us just dreamed of , I for one will watch every video you choose to share with us , Take Care my Friend!
Good morning, kudo's to those viewers who recognized the oil slinger, depth of the PTO. Awesome to see you "happy" getting those two halfs together. Can't wait to see you finish restoration on the 856. Have a great day everyone.
@Jeff-jg7jh
3 ай бұрын
Pete took the advice well. It has to be a little scary to take on something so complicated on your own, but with a little help from "friends" it is successful. Team work.
@LauraDittman
3 ай бұрын
Good afternoon, Jeff and thank you for your response. I call it bonding experience that has resonated with large number of viewers ( American farmers etc. ) can involve themselfs in the process of restoring an old or antique tractor ( I call it history )@@Jeff-jg7jh
I don't spend much time reading other people's comments. I'm not really here for them. I'm here to see what you have to say and see what you're doing. Make the videos YOU want to make. Lots of people will watch, a few will skip away, and few will unsubscribe. Let em go. You've had 34,000 people views of this video in the six hours it's been up. That's about 34 times the number of people in my home town. I find that alone kind of amazing. Just keep being Pete & Hillary.
Those bolt on rolling adjustable jacks are a must have for splitting tractors. Beats the heck out of a floor jack that never seem to stay where you put them. Thanks for the videos.
Thank You Pete!!! What makes this series so enjoyable to me is, you seem to be enjoying making it as much as I enjoy watching it. Great content! Murfreesboro TN
I love watching you work on your tractors as well as everything else you do on the farm.Thanks for sharing.
Thanks for taking me along for the ride.
I have always enjoyed your videos. Definitely calming and informative as well as feeling like your just hanging out with a friend down the road sharing some time of the day . As always thanks for sharing your videos. ❤
It never ceases to amaze me what all you do in that little garage! I hope one day to have the same patience and wisdom as you Pete you make this tractor stuff look so easy.
Over 7000 views in one hour. Makes for a great Sunday morning watch. Enjoy the day and looking forward to next Sunday video.
I'm just sitting here enjoying my Sunday morning class with Pete. Listening, watching, and amazed at the patients and calmness of it all. I'm so hectic throughout my week it is a pleasure to take the time to slow down for a high-quality video and that voice. Thanks Pete you always help my piece of mind.
I love watching you do these restorations even though it is something I will never do. I love the methodical work it takes to do this right. I am sure I learn something from each video that may come in handy one day. As somebody else has already said "it is farmwork" fixing things that go wrong is a part of farming, a restoration is just a lot of fixing things all done at once!! Keep up the great work/content.
My dad was a marine engineer & watching him work on an engine put me in mind of a surgeon. He always had his tools layed out just so & took his time. Your work reminds me of him. Thanks for sharing.
Thoroughly enjoy these video moments. Almost feels like I'm there and things I use to love doing . Thanks .
2/26/24..FA 856 re-assembly of (new) clutch in TorqAmplifier & joining both halves of tractor. A+Pete, incredible attention to details, beautiful video/lighting & close up camera shots. Anxious to see completion, starting, shifting & driving around with shiney new Gloss Red paint 'blinding' all we viewers! Stay safe & carry on!⚙️🔩🔧💪😊🍺
Pete, awesome workmanship. I love your methodology for moving through the removals and rebuild stages. Keep up the great work.
Thanks, Pete, great post! I appreciate your detailed explanations while you are putting components back together. Its also really nice that you have other viewer experts who notice things and give you advice on better ways to do this very involved rebuild. Well done, guys!
Instruction manuals are useful, but you're practices and all the 'tricks' make all the difference. Thanks. Onward1
Pete,,,You are livin my dream !!!
Pete, we love what you do , people who criticize you and your videos just have big mouths who should go somewhere else and comment. We love to see you and your family and farm life. I understand your decision about the pigs, but I think Billy is a cute guy with his wiry hair and his “ ripple’s “ in his ears! Keep up the good work and I love your tractor videos! God bless.
Pete Because of your Show I have a new hobby. Collecting die cast Farmall Tractors. I'm addicted lol.
Another great video Pete, every time I watch you in the shop working on projects like this I reminisce about similar tasks I did back in the day. This one brought back a memory of putting new clutch in a 1951 Pontiac a friend had we were on our backs under it in the middle of Dec of 1959. fingers numb, etc. so I always think ?wow" wouldn't it have been nice If I/we had a nice warm garage to work in back then. thanks for the memories Pete. love them. can't wait for more. Ok on the pigs I can relate to them also raised a few myself for myself and can relate to what goes on there. You do what you deem necessary for you and the farm. not the viewers. whims. altho we all know you take that seriously we do understand. thanks for sharing. God speed. ECF
@07Giddyup
3 ай бұрын
I have a similar memory on my 51 Chev back in prob 64 or 65😊
Getting the alignment is important and doing the due diligence of what you did made it easier. Sometimes a guy just has to be patient, not always a strong suit of mine, but you sure have it! Good to see it coming together, that's neat to watch. Thanks Pete, have a nice day!
@JustaFewAcresFarm
3 ай бұрын
Thanks Dan. I sure am glad I checked the fit of that pilot bearing. If not, it would have been a very bad day!
@paulmanson253
3 ай бұрын
Never crossed my mind that would be a problem. You checking that out in advance,you really dodged a big one.@@JustaFewAcresFarm
You’re the best Pete, What a great teacher. I appreciate you very much. You’re a big help to a lot of people. Thank you. Have a great day.
One of the best things about you Pete is, fessing up to your mistakes and thanking your viewers for the comments. I have no interest in rebuilding an old tractor or even owning one but I enjoy watching. There’s other content creators I’ve watched in the past that I’ve made comments about mistakes they made and they made it out as if they figured it out but they’re too dumb in the first place. I unliked and unsubscribed them. Thanks for being an honest good person
Gotta love the Red Tractor fans to keep you honest on your rebuild.
All the videos are TOPS in my book,peace brother…
Pete all I can say is that u are one Smart man .
I have enjoyed your work immensely. Looking forward to the finished product.
Thanks for bringing us along!
Slick. Went together just beautifully.
Thanks for sharing the video Pete. I enjoy watching them. You are doing some awesome work on the 856. It's going to be nice and it will last you for a long time. They are good tractors. Can't wait to see it finished.
Really nice to follow...Somehow the pace and using hand tools creates a soothing effect...ZZZ...
Yes , Pete, by far your most complex and tegious tractor work yet. this tractor is geting into the high tech area that requires so much more care with fetail and a good deal chance for error { the shaft oil slinger for instance ) . You are doing a fine job as usual and we appreciate the trip.
Always amazes me that they still make parts for these older tractors. Great to see. Thanks for the vid Pete.
Don't forget, "Tractor wars" tomorrow night the 26th on PBS
Really enjoyed the video. Very satisfying. Can't wait for paint!
Pete...I must qualify my statement by saying I'm not auto mechanically inclined, but your videos are fascinating. I look forward to each video.😊
Pete I sure do love these restoration videos. Your a awesome teacher 🎉 👏
Can't wait to see the finished product. Lookin good!
Pete, I had an Uncle in Maine that ran a dairy farm with an average of 100 head. So I know dairy farming fairly well and I miss working on it with him. You bring back some of those memories for me. Thank you sir. I do enjoy all that you have shared with us, especially the rebuilding of tractors. I believe you did say that you were planning on building a new shed? If so, that is one topic I would also enjoy watching. Also, I like your ideas with cooking on the grill. the LONG slow cooking of the brisket where you did a circle of charcoals and hickory wood... I never thought of doing that. Thanks again. I had to bust out laughing when that snap ring popped off into neverland... because it happens to all mechanics at least once. Thanks for the laugh.
Nothing better on a Sunday than cup of coffee and watching Pete on his far. No matter what he is doing. I have used the teflon seal many times on different engines they hold up the best.
Good work the connection, and thanks for the correction!
Thanks Pete , always enjoy no matter the content you choose. A big hello from Missouri.
Always nice if you working on machines and people share some wisdom.
I’ve watched this video twice. Good info Pete. Thank you.😊
Evening all. Thanks for the video Pete. Check of a thing you remember how the transmission goes back together. Great attention to detail.
Really enjoying this series on the 856. Very interesting
I love your content, your sage advice & pleasant demeanor through all your tasks farm, mechanical or otherwise. Talk as much as you desire. I’m listening. 🚜🐄🐓🍪🍪🍪🍪☕️😎
Never any complaints here. Good job putting the tractor together.
That was one interesting way to install the clutch assembly. I had no idea you could do that. Once the 856 is finished she should be as good as new. Looking forward to the part of the MCV assembly and front bolster repair.
I enjoy each and every one of your videos Pete.