Thank you for all your support. Also, please consider purchasing an item from my merch store. (link in the description) Some of the designs are done by my kids!!! By purchasing an item, you help them fund their studies.

@rachaelkunda4631

2 жыл бұрын

Can you do one for amd ?

@EXORDIUM-3D

2 жыл бұрын

@@rachaelkunda4631 Sorry, I don't have a Radeon gpu so I cannot test it. But since Lumion is based on a gaming engine, perhaps you could try one of those tips for improving Radeon gpu for gaming performance. Maybe you can start by disabling Freesync first.

Finally soone who speaks in a calm way and getting to the point asap

This tutorial did help to change my benchmark from 59% to 96%, but did not have any effect on render time (using slightly overclocked RTX 3060 12GB/Lumion 11) . . . so I'm not sure if it really matters what the benchmark says . .. perhaps it helped with navigation speeds, page loading, etc, but my 20 hour render project was exactly the same after I updated benchmark settings, restarted Lumion and re-rendered the same project..to me the benchmark is just a gauge to inform that you need faster hardware.....

I've learned about the Nvidia settings but that settings inside Lumion itself is hardly known. And it really did improve the performance. Amazing that I've never of anyone who shared this secret. You're a savior. Thank you!

@EXORDIUM-3D

2 жыл бұрын

You're welcome. Glad to be of help.

Thank you so much. It has worked on my 2GB Quadro GPU with 8GB Ram and the version of the Lumion is 9.5.

@saurabhmeshram7450

12 күн бұрын

bro u have Lumion 9.5 version ??

definitely diving into your videos. Thank you so much for taking the ti to teach us that are green in the field. Have a great day

@EXORDIUM-3D

2 жыл бұрын

Thank you. Your support is greatly appreciated

BROOO thankyou so much, this really helped and the tutorial was really easy to use as well :)

Thank you so much. I just upgraded from Making Waves, so the concepts are familiar, but tNice tutorials is a whole new world! Look forward to

Very nice and well explained. Every tNice tutorialng is crystal clear and easily understandable.

unfortunately it doesn't work for version 12(

TNice tutorials comnt from you is legendary. Uncomplicated like your video!!!

@EXORDIUM-3D

2 жыл бұрын

Glad to hear that!

The introduction was very helpful, thanks!

this the most effective than the other video, i got 75% only to the other video, but on this video i got 96%, very helpful thank you

By far the best tutorial i found to tNice tutorials in a short ti

Thankyou so so so so much 👍🤩 17% increase to 81%

It really worked! Awesome. Thank you. That settings inside Lumion is a big help.

@EXORDIUM-3D

2 жыл бұрын

I'm glad that it worked for you as well.

Thank you. TNice tutorials is really helpful. Much respect

Thankyou so much. Was freaking out, but this tutorial solved my issue!

@EXORDIUM-3D

Жыл бұрын

Good to hear. Enjoy!

This is the best free software Ive seen. Respect.

Gracias! hasta el dia de hoy sigue funcionando perfectamente! sos un genio! saludos desde ARGENTINA!

congratulations fam!!!

I tested this with my RTX3070Ti. My before benchmark is %80 and my render time is 53 secons for 4K and 207 seconds for 8K. After using these settings, my benchmark went %100 HOWEVER my render times are 55 seconds for 4K and 217 seconds for 8K. SO THIS SETTINGS IS NOT IMPROVE FOR MY RTX3070TI EVEN THE BENCHMARK RESULTS IS IMPROVED.

@vmafarah9473

Жыл бұрын

ur comment helped me.

Damn. Nice job. I realy couldn't find a proper tutorial explaining everytNice tutorialng you needed clearly but then i found tNice tutorials treasure of a video.

it worked! thank you so much!!

I also got the 100% performance ratings from my HP OMEN 17 after the previous rating of 68, my specs: processor: intel 11800H, ram 32gb, Gpu: RTX 3060 even on the render times yours was ahead by 1-2 seconds on average compared to mine. I don't understand why some people here with higher specs are starting off with much lower ratings than I.

@vmafarah9473

Жыл бұрын

lumion version, background running apps ram usage, sketchup opened in the background etcc... may affect render time.

thanks, it actually let me through so i could download it.

many thanks from Vietnam, I've just built my old VGA from 1660 super to RTX 3060ti, then after I checked the benchmark in Lumion 11 and followed your video tutorial, my benchmark was update from 31% to 100%, it was fantastic. Thanks a lot.

@EXORDIUM-3D

Жыл бұрын

Good to hear! Have fun.

i really apreciate your help with dowloanding this software

Hey! Thanks so much for this video!

Thank you so much this helped a lot!!!! You saved my life

Thank you for explaining this thoroughly!

This was so helpful!! Thank you

yo bro, really thankya. Big respect

This is great, thank you!

Thank you so much!!! It helped alot!!!

Ima download it thanks for sharing!!

great help. from 34 to 55. not bad for me

Amaizing it really work!! Tanks

Hey , Tried all the settings mentioned in your video but still my benchmark in 23% My vsystem config is i9 12k processor 3080 10GB Graphic card, please help me out

@kcefx

Жыл бұрын

what about your ram

Yes bro, totaly works, thnx dude

@EXORDIUM-3D

2 жыл бұрын

Good to hear. Awesome

Really nice and helpful... Thanks!

Hi there! I see that all of you have a positive response from this video but somehow after many changes my benchmark still shows the same specs on GPU which is 23%. I have new AERO 15 OLED with spec that should work more then recommended: GPU - NVIDIA GeForce RTX 3070 Laptop GPU; Graphic memory 8gb; CPU - 10th Gen Intel(R) Core(TM) i7-11800H@ 2.30GHz Is there anything else I should try or check? Thanks!

@EXORDIUM-3D

2 жыл бұрын

Check Device Manager. See if there appears 2 items under graphics card. Disable Nvidia and leave only the 3070.

@herielpaul7440

2 жыл бұрын

@@EXORDIUM-3D On device manager there is no graphics card panel

@herielpaul7440

2 жыл бұрын

Same problem here

you gotta tune the instrunt, by right clicking on it in the channel rack

hanks lot Sir.. You helping us..

It was the sa for , In the GMS I switched the "Program" to "Analog app 1 TE"

I have an computer with *GTX 1660 TI* And i have a laptop with *RTX 3070* My computer with the *GTX 1660 TI* render a 4 sec clip in *9.5 minutes* in Lumion 13 While my laptop with the *RTX 3070* render a 4 sec clip in *20 minutes* in lumion 13 So my computer with old gpu renders faster than my laptop with a expensive new generation gpu. That's why i search this video to see what's going on.

TNice tutorials person speaks the truth, the whole truth and notNice tutorialng but the truth

Thank u so much. I've been so confused, but tNice tutorials video helped a lot.

thank you so much dude you're a god

I used this setting but didn't get higher benchmark. I have gtx 1660 6gb

good job male, thanks!

I tried this on my Omen 15 6th gen i7 4GB GTX 960m 2 years ago, it worked. But today I'm trying it on my 7th gen Dell Inspiron 15 Gaming i7 4GB GTX 1050 ti but no luck. What do I do?

will try it

@EXORDIUM-3D

Жыл бұрын

Great! Report back with your result.

We all learn differently, I watched, attempted and fucked up, now I’ve watched again, attempted and hopefully won’t fuck up... as much

Works well!! DANKEEE

other desktop soft making software have more features and you can do much more than you can on mobile but the user interface in

How DO YOU OPEN A setup ALL OF THE TUTORIALS START WITH A setup

It really works!! Thanks a lot! My benchmark increased from 23 to 100 Yay! My GPU is Rtx 3060 ti :))

@EXORDIUM-3D

2 жыл бұрын

Awesome! Have fun.

@skansar3377

2 жыл бұрын

Which nivida drivers u r using?

@yohantambatamba

2 жыл бұрын

From 23 to 100?? wow! I can imagine your joy.

@vmafarah9473

Жыл бұрын

But that dont help in render time, its vport fps i.e. smoothness increase as resolution and shadow reduced, but not render time, its common sense.

@vmafarah9473

Жыл бұрын

share the info if your render time went down.

thank you so so so much your a great person you helped

the right and it will soft like magic!!

Thank you so much!

omg its work 34% to 66% bench mark so happy thanks bro share tips

@EXORDIUM-3D

2 жыл бұрын

You're welcome. I'm glad it worked for you too. May I know your pc config, if you don't mind?

I have a question. I recently got XPS 15 9520 and my benchmark is 28% however when I tried what you did on the video my processor suddenly went down on the benchmark. What should i do? My processor is 12th Gen Intel Core i7- 12700H

@EXORDIUM-3D

2 жыл бұрын

Don't worry so much about the processor as Lumion is heavily dependent on the GPU. You have a decent processor. You're good to go. I used to have a 1st gen Threadripper with 16 cores and 32 threads. I barely reached pass the Recommended benchmark. I switched to 3rd gen Ryzen 9 with same number of cores and threads and got better result.

Hello, thanks a lot for this video. The First part was very usefull. But i don't understand the part where you lower the resolution of the lumion editor since gigantic pixels makes lumion smoother but not very usable too, and it change nothing with the rendering time. Anyway the first part helped me to reach 46% on the benchmark with my config (RTX 3080, Ryzen 5800x, 32 GB DDR4, System + Lumion on a 1 To SDD Pcie3 4x Mvne, Windows 11). I think my config should be able to give 80+ % with the benchmark (with 3/4 quality star and 100% resolution (1080x1920 monitor))but i don't really know the reason why it don't goes upper than 50%... maybe it does not like Windows 11. By the way thanks again for your video, very usefull.

@peregrines775

2 жыл бұрын

yea yours should be around 80-100%, mine has i7 8th Gen GTX1060 24gb DDR4 and went from 38% to 56% and its on windows 11

@akikolucia

2 жыл бұрын

Hi! The first time I opened Lumion it was like 40% but I re-run the benchmark, without doing anything, and went to 80%. Idk why, but it happens to me eveytime I format my pc and reinstall Lumion.

@endritmusliu5150

2 жыл бұрын

@@akikolucia I also have the same problem, my banchmark is 54% , i have 16gb ram , and gtx 1660 Ti 6gb ,

@vmafarah9473

Жыл бұрын

just over clock single core, lumion uses single core.

@vmafarah9473

8 ай бұрын

@Emmanuel72 , I think nothing is useful here, check ur rendering time before and after those settings in nvidia control panel, it will be the same.

Hey, I just wanted to check briesofty if there is a way for to import a new soft into the program, for example softs or sotNice tutorialng that

Thanks bro thank you so much 🤩🤩🤩

Funciono perfecto! Muchas gracias!!!!!!!!!!

Di komputer saya tidak ada perubahan signifikan pada benchmark masih sama seperti sebelum.nya

Thanks a lot bro. I have a question, i have a PC build with the following: Intel 12900k, 32gb DDR5 & RTX 3070. Do you recommend upgrading my RAM to 64gb ? Does really help ??

@EXORDIUM-3D

2 жыл бұрын

You're welcome. Yup. If budget is not a concern, definitely upgrade. RAM helps with handling larger files. You have a good system. That shouldn't be an issue.

It's really working brother for me the benchmark increased from 23 to 83 for my system with Rtx 3050 GPU newly launched

@EXORDIUM-3D

2 жыл бұрын

Good to hear. Congrats on your new GPU. I hear it's anti-miner.

@gok_1823

2 жыл бұрын

Thanks bro ✨

@fouseytube8163

2 жыл бұрын

How much time it takes to render in 3050

@EXORDIUM-3D

2 жыл бұрын

@@fouseytube8163 There really is no definitive answer to that question. There are many factors to consider; the complexity of your model, the size of your model, your materials. etc.

@fouseytube8163

2 жыл бұрын

@@EXORDIUM-3D ya I know but compared to other like 1660ti, 3060 how is the speed m asking

it work on my pc thx bro vеry much

mine didnt work using lumion 12

@EXORDIUM-3D

Жыл бұрын

Yes. I also just found out recently that this doesn’t work on Lumion12 anymore

what should I do if the file is large? it crashes everytime. the memory of lumion is 16 GB, not enough for a small project

@EXORDIUM-3D

7 ай бұрын

What is your graphics card? For large files you'll need a good GPU and at least 32gb RAM.

Hey man, thanks for the tips! Just wanted to ask, will adjusting the nvidia setting make the PC more loaded? I have a gf1660ti and at the lowest settings my PC's cooler is very loud when working in lumion, is there any risks for me after adjusting thesettings, or it will make it even more silent and help the PC work better in lumion?

@EXORDIUM-3D

2 жыл бұрын

Unfortunately, Lumion is gpu hungry. Nothing we can do about it but to have a better gpu and better cooling system, if we can afford it. That’s Lumion is best on a desktop

Thank you 👍

it worked!

@EXORDIUM-3D

2 ай бұрын

Good to hear. Enjoy!

U BEST!!!

Very helpful

Thank youuu so much!!!

@EXORDIUM-3D

2 жыл бұрын

You're welcome!

can someone help me i just bought hp omen 16 when i test benchmark in lumion i got score below minimum?

Awesome program

In The setup yup that was my problem thanks a lot

once i buy the basic version of soft soft can i upgrade to producer for 100 dollars or do i have to buy it new for 0?

Hi, how to open 3d settings? I have " Intel(R) HD Graphics"

@EXORDIUM-3D

2 жыл бұрын

Let me guess, you have a laptop? HD Graphics means you don't have a dedicated graphics card. It won't work with Lumion.

After doing this my bench mark is decreased from 9% to 1 %🙂 laptop - msi pulse gl66... is there any solution?

I Have RTX 3060 12 GB 16 GB Ram ryzen 7 ...but Lumion crash ..during 4K animation render .. can we use this method to solve this ? Plz help

@EXORDIUM-3D

Жыл бұрын

You can use this setup for all Nvidia cards. But your bottleneck is your RAM. For 4K animations 16GB is not enough.

thanks so much man

Thank you thank you thank you so much bro

@EXORDIUM-3D

2 жыл бұрын

You’re welcome. Enjoy

HI. Thankyou for this, my bechnmark did improve but it did not go 100%, i am using Lumion 11 & GTX 3060 i7 6gb gpu & 16gb ram. please help!

oops, sorry! suddenly it works! thank you

@EXORDIUM-3D

2 жыл бұрын

Awesome! You are welcome

Thanks so much

Stick with it it gets easy over ti

Thank you for your setting :) i'm happy.. It makes my benchmark from 51 to 100, but is it makes the render process faster or no? I'm a novice, please answer my question :D thank you, really appreciate this video bro..

@applejacks123fdfdsw56

Жыл бұрын

This tutorial did help to change my benchmark from 59% to 96%, but did not have any effect on render time (using RTX 3060 12GB) . . . so I'm not sure if it really matters what the benchmark says.

Good, very good friend!!

@EXORDIUM-3D

2 жыл бұрын

Thank you!

Thank you so much

Can someone help me please, i got rtx 2080 super and the gpu benchmark doesn't even hit the minimal result wth, please help

I can't afforded soft soft. what alternative can I get?

I've just seen this after upgrading to Lumion 23. Since I don't want to tweak my hardware unnecessarily, what would happen if I try that on Lumion 23? Also, how is the benchmark 100% if not everything is on the edge of recommended. Is CPU not that crucial to achieve 100%?

@EXORDIUM-3D

Жыл бұрын

Haven't tried it on the latest Lumion but since v12, this doesn't work anymore. maybe you can give it a try and see if tit works. You're not gonna be tweaking the hardware with these. It's just the settings for optimal performance. You can always go back to default settings, both Nvidia & Lumion. Lumion is GPU dependent not so on the CPU.

Yes, it works, my RTX 3070Ti was showing too low, now it went all the way high. thks.

@EXORDIUM-3D

2 жыл бұрын

Good to know. Enjoy!

@janibari1665

Жыл бұрын

@@EXORDIUM-3D pls help. mine was 90% before changing settings now its 9%. huhu. pls help me im using my laptop nvdia 3060 ryzen 7 32 gb ram, Pls help. so i can recovr my settings

@EXORDIUM-3D

Жыл бұрын

@@janibari1665 Did you try going back to Default?

I've been using Lumion for a while without problems but when I opened it this morning it showed that it was really low in Graphics Memory. My Lumion is version 10.5 does anyone know what to do?

@EXORDIUM-3D

Жыл бұрын

What's your GPU? Check out Lumion's How to increase Virtual Memory on their website. It might help.