Unleashing Power in Your Zero Turn Mower! Diagnosing and Fixing Loss of Power & Bogging Issues
Thank you for watching!! If we helped you out and you want to show your support - LIKE, SUBSCRIBE or give us a shout out below. If you saw something you didn't like leave your comment below as well, these things help us get better!
To see our recommended tools and products visit our Amazon shop at www.amazon.com...
We uncover the secrets behind diagnosing and fixing the loss of power in your zero turn mower.
Is your once-mighty machine now sluggish, struggling, and leaving you frustrated? Common symptoms of this are bogging down when the blades are engaged, loss of power or low engine speed when cutting or going uphill, won't cut right or sounds like it is struggling.
Fear not! We've got you covered with step-by-step instructions, expert tips, and proven troubleshooting techniques that will unleash the untapped potential of your mower.
Watch as we dive deep into the heart of the issue, identifying common culprits such as clogged fuel lines, dirty air filters, faulty spark plugs, and more.
This comprehensive guide will empower you to reclaim the power and efficiency of your zero turn mower, ensuring that your lawn is beautifully manicured in no time. Get ready to revitalize your mowing experience and join those who have already transformed their machines with our tried-and-true methods.
See part two if you realized something different about the right cylinder!
• Part 2 Unleashing Powe...
The valve spacing is fully adjustable on these mowers. I speak about it being hydraulic in the video like most of the Kohler engines of this type but that is not correct. You can find the adjustment process at • Zero Turn Mower No Pow... if you are needing to adjust your valves
This is a Kawasaki FR691V engine on a Toro Timecutter Z5035 with model number 74376
Don't let power loss hold you back - it's time to reclaim the throne of mowing supremacy!
Like and subscribe to see more helpful videos like this one! Save some money by doing it yourself!
#toro #kawasaki #smallenginerepair #individualizedrepair #smallbusiness #diymaintenance
About Us:
My name is Martin. I have been repairing tools and small engines for almost 20 years. We operate a small engine repair shop in Illinois. We service / repair Briggs & Stratton, Kohler, Kawasaki, John Deere, Cub Cadet, Toro Tecumseh, Loncin, Honda, Craftsman, Husqvarna, MTD, Troy Bilt, Simplicity, John Deere, Exmark, LCT, Generac and many more brands. We work on riding mowers, walk behind mowers, snow blowers, zero turns, generators, pressure washers and much more. We normally repair about 3,000 pieces of equipment every year and look at many more that are beyond an affordable repair. Hopefully our videos will save you some money and give you the information you need to work on your own equipment or figure out the issue at hand.
Disclaimer: Links included in the description are affiliate links. As an Amazon associate we earn from qualifying purchases. There will be no additional charge to you for purchasing here. We appreciate your support, which allows us to continue to provide original content!
Please be careful when repairing any piece of equipment and follow all possible safety measures. This video is for entertainment purposes only.
Пікірлер: 72
My mower was surging. Checked EVERYTHING Spark, air, adjusted the throttle cable, cleaned the carb. I blew out the fuel line, and checked the fuel pump. Nothing I trouble shot worked. Because I was lazy I didn’t check the pick up tube or elbow. The last resort was to check the pickup tube and elbow. When I removed the elbow it was clogged. Cleaned it and at last my problem was solved. I wish I had seen this vid, it would have saved me so much time.
@IndRepair
Жыл бұрын
Only reason I put out these videos. I have been there and had all of these issues multiple times over the almost 20 years I have been doing this! Hopefully I can help someone and save them some money!
Just rebuilt mine. It's not a hydraulic lifter, the push rods ride on the cam via the tappets. The valve clearance is adjusted via the rocker bolt, it's an offset cam bolt and the nut on the other side locks the position. Clearance is supposed to be .05 to .10 on exhaust and inlet.
@IndRepair
7 күн бұрын
Updated that in the description on this one, thanks for sharing!
Thorough and excellent, as always! Thanks!
@IndRepair
Жыл бұрын
Thanks for watching!
Hey Martin, how can you adjust the low idle on the carb on the FR651V? I was working on one and the choke was sticking I fixed that and it runs great under load and all. But now it wont run on low idle, it dies. How can I adjust that up?
@IndRepair
Ай бұрын
Look at the throttle plate, at low speed it rests against a screw. You will want to turn this screw clockwise until it is at the speed you want it at
Theres definitely an adjustment on those rockers. Its a cam style adjustment. You loosen the nut holding the rocker to the rocker arm. As you turn the screw it increases or decreases the valve lash. Should be .004"-.006." While they do have hydraulic lifters, theres still adjustmente.
@IndRepair
2 ай бұрын
Definitely so
@maporules
Ай бұрын
100% right
Thanks man, i have the same engine and this helps me to keep an eye on those kill wires.
@IndRepair
11 ай бұрын
Thanks for watching!
Pardon me thought I’d mention that you do have adjustment there to set the valve clearance. Set your key on crankshaft to top dead center compression stroke with key facing piston 1 or 2 then loosen nut on side of rocker then rotate the bolt going through the rocker because it’s on like a lobe or cam like. As u rotate it the rock will move slightly up then back down while sliding a 0.006 th feeler gage until feeling a slight drag then tighten and done.
@IndRepair
Жыл бұрын
Good info! When I looked at it originally I thought they were hydraulic like the Kohler but they weren't. We have another video at kzread.info/dash/bejne/hJ2Vy6ubgNa9m6g.html that shows the process on this engine. Thanks for watching!
Would this fix my current issue of having the arms fully forward but struggling to go up hill once I start up the hill it’s alright but once I get almost to the top I have a loss of forward motion and struggles
@IndRepair
Ай бұрын
It definitely could bog down under a full load on the hill but normally you will notice it if you are in thick grass or under a big load in different instances also
@Pur3R3dBlow
Ай бұрын
@@IndRepair I got about 2-4 cuts where it went up the hill no problem and the last 3-4 cuts it’s gradually slowed going up hill to where I’d have to push one arm further and kinda walk it up the hill I got a 50 inch Troy built with the 25hp Koehler
@Pur3R3dBlow
Ай бұрын
@@IndRepair when I bought the machine it had all new pulleys new tires sold rubber fronts new belts fresh fluids new new blades with about 192 hrs on it I think I just broke 200 hrs today after I cut my yard
Thank you
@IndRepair
10 ай бұрын
Thanks for watching!
You put out some good videos! Thx
@IndRepair
9 ай бұрын
I appreciate that! Thanks for watching!
Noticed right off the exhaust pipes were different in color so it has not been firing on the left side for a while. I use a heat infrared gun a candle, or crayon, to diagnose no firing on the cylinder. Old race car quick diagnoses. Thanks for you time doing a video.
@IndRepair
9 ай бұрын
Nice! Good tips! Thanks for watching!
Seen it too where the little plastic tab that holds the choke linkage onto the carburetor had a crack in it... Was incredibly hard to track down.
@IndRepair
6 ай бұрын
Interesting! Thanks for watching and for sharing!
Used my hustler zero turn with a Honda engine to cut through some taller grass and it worked pretty well but the next time I used it on not that tall of grass it starts slowing down or losing power and I’ll turn the blades off and the motor will gain power back again, but the grass isn’t even that tall. It’s simply a little bit of minor stress on it and the power diminishes. Any thoughts?
@IndRepair
11 күн бұрын
Could be running on one cylinder. I would follow the steps here for testing each individually
Those valves on the Kawasaki fr691are adjustable and not hydraulic. You loosen the center nut and bolt on the rocker The spacer in between them has an off center hole that allows you to set the valves.
@IndRepair
11 ай бұрын
Good info! When I looked at it originally I thought they were hydraulic like the Kohler but they weren't. We have another video at kzread.info/dash/bejne/hJ2Vy6ubgNa9m6g.html that shows the process on this engine. Thanks for watching!
@douglasforsythe5853
11 ай бұрын
@@IndRepair I thought the same at first on the one I worked on as well. I put it back together and had the same problem. Did some research and found they were adjustable. Great video!
I try to do a leak down test to decide the overall condition of the engine, I just had a bad spark plug and first new bad plug in years Was very surprised to 😂
@IndRepair
Жыл бұрын
It is never a bad idea to do at least a compression test and/or a leakdown test to gauge engine condition!
$3,500 for a head gasket on a lawnmower!! My sons SUV has a blown head gasket and the dealer wanted $3,500. I'm hopefully going to be finishing it today (I work for free).
@IndRepair
Жыл бұрын
Sounds a wee bit steep!!
Dude, you're up too early. It was running on the left cylinder.😳
@IndRepair
Жыл бұрын
Lmao 🤣 who would have thought it!! Wow that's embarrassing! Update to come!
@IndRepair
Жыл бұрын
This happening, a chipmunk coming out of a blower tube and high heat make for an interesting day!!
Have a Husqavana Z254F Z/T that runs great. When engage PTO Engine dies Replace all Safety switch and engine still dies when engage PTO. Any Ideal of cause
@IndRepair
11 ай бұрын
Have you ruled out a safety issue or is it because the engine is killing itself? Easy to test by seeming if it will stay runningnwhile using some starting fluid in the intake when it starts to die. If it stays running longer St that point you know you have a fuel/air mixture issue, bad fuel or a carb issue
I’ve always checked the heat of both exhaust pipes. Do find any issues with unplugging one HT lead at a time with newer models?
@IndRepair
Жыл бұрын
Never an issue even on EFI versions, they always seem to try and adjust but can atleast make sure both will run independently
@steveriggenbach90
Жыл бұрын
@@IndRepair thanks. I know it’s old school. Another was to take plug cap off a push mower. By hand spin the blades. If compression is good the blade will bounce back.
@IndRepair
Жыл бұрын
@@steveriggenbach90 Good tip!
What’s that t handle and spring driver calles? Or where can I get one?
@IndRepair
11 ай бұрын
I am not sure what exactly you are asking about?
Hi. 😊😊😊
@IndRepair
Жыл бұрын
How you doing?
Check your fuel filter, it could be dirt and could be a cheap fix before taking other steps . 1.99 fo me as it's running like it should.
@IndRepair
5 ай бұрын
Absolutely! Thanks for watching!
I did a Comp test and my #1 has 50 PSI and #2 is at 120.. Valve adjustment ?Valves ? bad Cam ? I think they has Comp release on both sides ? Any Idea on what the compression should be ?
@IndRepair
10 ай бұрын
I would pull the low comp side valve cover and see what's going on may have a stuck valve or improper spacing. Inspect the valve movement/spacing and go from there. If you don't find any issues there the head gasket could be blown out, can check further with a leakdown tester if available, which would tell you where your losing the compression. Thanks for watching!
@AP-514
10 ай бұрын
Did Valve adjust ment set to .005 on Both Valves. Leaks down fast. Oiled Cylinder NO Help..same same
@IndRepair
10 ай бұрын
You can't tell where the air is escaping? Should be able to hear/feel it pretty easily. All valves are moving properly?
@AP-514
10 ай бұрын
Valves seem to be moving correctly. I do see that this model is supposed to have compression release. think I will Pull the Heads off and have a Look @@IndRepair
@IndRepair
9 ай бұрын
@@AP-514did you get it fixed up?
Would have been better to have replaceable rod insert than hyd lifters
@IndRepair
Жыл бұрын
When I looked at it originally I thought they were hydraulic like the Kohler but they weren't. We have another video at kzread.info/dash/bejne/hJ2Vy6ubgNa9m6g.html that shows the process on this engine. Thanks for watching!
@ezridr1234
9 ай бұрын
They are, he made a mistake not recognizing the rocker type. It has solid lifters and push rods. The lash adjustment threw him off as they're not center mounted like most engines. In some ways this is a better design kawi came up with years ago. No Torx bits to deal with on this type plus it removes the lash being effected from locking them down onto your filler gauge on the prior center mount type.
Uhhh... kawasaki valves are definitely adjustable... and easily at that
@IndRepair
3 ай бұрын
Definitely! See part two description and video where I mention this
Bro, I'm embarrassed for you. Those valves are fully adjustable with push rods, not hydraulic. Maybe I missed something but I swear you chose the wrong side as being weak. It ran on the left side (from camera view) and when you removed the left side plug wire, installed the right side wire it didn't run implying the right side isn't firing or has an issue. You didn't rotate the engine to TDC and check valve clearance. Those valve rockers are on a cam offset bolt. You break them loose with a 10mm and then adjust the cam (not the internal cam) followed by tightening the other end at between 4 to 6 thousands. Look man, I'm not flaming on ya as i know you're trying to help, but if you're going to make an instructional video teaching people, make sure you're familiar with the subject first. You might consider deleting this video, I landed here because it's the exact model as mine and thought I'd check it out. I'm only commenting out of concern for others that may be mislead. Those rockers ARE adjustable guys. Set the lash to .004 - .006 and lock em down. Thanks,, and i apologize if this reads in a bad way. I'm only trying to help as well.
@IndRepair
9 ай бұрын
Haha yes I absolutely showed the wrong side! I explain this a little in the follow up video linked in the description. I thought it was like a Kohler design with the hydraulic lifters and mis-spoke in this video. Checking out the valve spacing can be done without going to TDC as we were just making sure they were functioning properly not setting or checking them. I thought there was going to be a third video where I would speak on this but the customer chose not to do the full repair. We also have a video at kzread.info/dash/bejne/hJ2Vy6ubgNa9m6g.htmlsi=G_m-4i9t2Cq79ko- on the valve adjustment process of an engine like this. All of the diagnostics and troubleshooting processes still hold and will work well to find an issue. Constructive criticism just makes everything we do better in the end! Thanks for watching and thanks for trying to help people with mentioning these things!
@belowfray5251
3 ай бұрын
Thanks for talking about the cam being adjustable
Uhmmm You pulled coil wire off plug right side(engine starts and still same low power) it runs, reinstalled, then pulled left side coil wire off plug(engine would not start/run)....... that tells me problem is on the right side ?!?!?! because it doesn't run on right side piston, yet runs on left side piston....... anyway you didn't complete the left side repair to show it runs smoothly....... could have just insulated wire to stop the arching/shorting to coil pack.....just to prove your diagnosis... No ?? what am I missing ??
@IndRepair
10 ай бұрын
Haha! Right you are! You are just missing the description and follow up video. We are all only human my friend. Check it out and thanks for watching!
@john-kneebee2143
10 ай бұрын
All good no worries, I thought I wasn't smoking anything......COol Thankx for the reply and video Take care@@IndRepair
@IndRepair
10 ай бұрын
You also!