Friends, I hope you like this idea and its implementation!

@aerialcat1

4 жыл бұрын

Very ingenious, turning scrap into useful items.

@kittystewart7521

4 жыл бұрын

Always interesting to watch. Thank you for working with your hands and recycling, repurposing, and reusing.

@lindyastacey

4 жыл бұрын

Very cool. Thanks for your videos. Your much more clever than me .

@user-ic6di8hh1k

4 жыл бұрын

Отличная идея!!! Молодец!!! И как рождаются такие идеи?!

@burleydad

4 жыл бұрын

Like a boss!

I like it very much when someone sees the options available to repurpose components of a broken item. Most people would throw the broken jack in the garbage without even thinking about what the intact items could be used for. Nice job. Keep up the good work and thanks for sharing!

@chrisgraham2904

4 жыл бұрын

So True! The 50 cent jack is damaged and no longer safe or useful for it's original intended purpose, but the machined components within are still in excellent condition. Those components would take hours to machine and produce and they would probably cost you $30 to $40 to buy, if they were available. Very creative re-purposing and a very useful addition to a work bench.

@petercarey7133

4 жыл бұрын

same. esp. with safety first, proper tools,ingenuity and of course a broken article. peace

@stevebabiak6997

4 жыл бұрын

Chris Graham - Harbor Freight has a scissors jack for between $20 and $30 IIRC on the price, plus they always have a 20% off coupon

@stevebabiak6997

4 жыл бұрын

Chris Graham - I just remembered that a few years ago my wife’s old car needed a replacement scissors jack. I picked one up at the nearest automobile salvage yard for $5. So they can be readily acquired for an inexpensive price.

@pwkoert6594

3 жыл бұрын

I agree, but his gloves are way over due... 8-)

Great idea. And nicely executed for an early concept. I imagine it will evolve even further as you use it. Thanks for sharing.

great idea, but a bit complicated!good job, sir

One time out of fifty I am glad I sat all the way through one of these videos. This was that one. Incredibly well thought out and remarkably accomplished. Thanks for expanding my mind.

My friend, your ingenuity and resourcefulness always make me smile. Well done. I love repurposing stuff.

Makes me miss my garage and working with my tools. Great creativity.

@yaboidustin2447

4 жыл бұрын

Your name is familiar, I can't quite put my finger on it

I love your video tutorials, getting to the point and not lengthy ,especially when you fast forward so viewers can get the idea and no voice over. Great job.

This really teaches me how to make a home made can opener. Thanks for the upload.

Love to see all these creations being used, mostly to make more. Fascinating to watch and see how long it takes me to guess the end product. 🤣🇷🇴🇬🇧

That is very resourceful and practical for a shop tool that is otherwise expensive. Nicely done.

I have found by following the thought processing you use to create a new tool or device as useful as the device created it's self. I am a global thinker and tinkerer and while I may not use your idea directly your creativity's in your videos live in in so many ways of my own. Thank you for all your help and support for the greater maker community.

Absolutely, outstanding repurposing of a discarded item. Incredible imagination. Kudos to you. Really enjoyed the video.

@ftmigabygalarza668

4 жыл бұрын

Nh

@ronb6182

2 жыл бұрын

This is good if you have the tools to make the project. We had benches that had all this in Jr high shop. High school shop also had benches with the holes and metal inserts. I like the wooden inserts but you must have rock Maple or other hardwood.

Very ingenious way of turning old stuff into good use, good thing i click on this! reminded me of earlier works of Paskmakes, thanks for sharing it.

Thank you for editing out the grinder noises!!!! I don't know if anyone has ever mentioned your editing but it takes forever and I truly appreciate it!

I’m blown away by the creative use of discarded objects. Aside from welding, it’s all tools I have available. How are you able to measure and execute so precisely? you made drilled 3x into that wooden block and created a perfect intersection that lined up with both that nut and the threading. Then freehand benchdog holes! I can’t drill straight down and then my holes get sloppy trying to make up for being a little off Very impressed! Subscribed and I’ll try to learn your tricks

Great idea. Good project for my workshop. My only change would be to try and make a protection to prevent dust, chips and small hardware to get into the rail where the wooden block slides. It might be a nightmare to get out. Love the idea, thank you for the video.

I real liked the idea! Enjoyed the suspense too as to what it was going to be. Going to make one myself! Thanks for the idea!

That was a really COOL idea. I really like that you repurposed something that was trash by most people. 👍👍

Excellent video for getting the creative juices flowing and promoting the concept of repurposing broken contraptions. Well done sir! There's mostly great positive comments with a small handful of narrow viewpoints. To the latter I say, if you're a crafter, open up your mind to the possibilities, don't just look at the face value of what's being made ..... go beyond! Beyond recycling, beyond what was made ..... there's crafting techniques, there's tool use vs tasks required to be done, there's a plethora of more ideas triggered from this video, there's the concept that everything can be used and used again and again.

I won’t argue that idea, it’s awesome 👏 that will keeps on our toes for while. Thanks for sharing. Cheers 🍻

Sometimes i'think, where This guy get the ideas from to make always This kind of materials. Just fantastic. Thumbs up.

@BigKelvPark

4 жыл бұрын

A B&D workmate maybe?

@ingogel725

4 жыл бұрын

@@BigKelvPark c0n7 m0⁷üì

Pask makes made a awesome table workbench and included this particular idea. I’d check out pask makes if I was any of you woodworkers.

The explanation and context at the beginning really helped to visualize what the project is about.

Fantastic idea.... now I know what to do with scrap unistrutt laying around.thank you for sharing.

Brilliant idea implemented by you ..!

@pulpo439

2 жыл бұрын

TVRepnoseque... *¡¡¡ CALLATE !!!*

Brilliant idea. That's definitely in my hacks list. Thank You.

@sageevanshantthiramoorthy8208

3 жыл бұрын

Kipp 881"""no

Thank you, i enjoyed watching that and used your idea of the wooden DOGs you made to make drawer handles for a job i was doing.

Did you stay up all night dreaming this? Its so cleaver. I am amazed, I wish I was this good.

fantastic idea! I enjoyed it a lot! I think myself : Wouldn't there be a possibility to fit a plastic lid inside of the mechanism so that the wood chip/wood dust to get in ? I wonder it is a bit difficult to keep its compartment clean. What do you think about ? Anyway, your job is perfect! Congrats!

What a great idea! Thanks

Really nice project! Interesting to use the miter saw as a bench saw, bravo!

Great idea, and good work! Screw jack parts are very handy. I adapted one to my disk grinder, and use it for cutting metal tubing, pipe, and angle iron by turning a crank. I get a straighter cut and fewer broken cutoff wheels.

safety and prep.,good sharp tools, clean worksite, No music, (only that of a tool ), efficient use of damaged article and most of all, Creativity. good workmanship. Thank you. subscribed. Peace and Truth will prevail. :)

Unbelievable, excellent real clever. Total respect. Fantastic! Regards Gareth Wiltshire.

@hand_craft

4 жыл бұрын

Thank you very much Gareth !

That is very groovy, and not only because threaded rod was being recycled! Keep on rocking!

You love your work.. I love to see a good tradesman (me too) at work. Thing of beauty!

Don’t listen to the haters, great video, love the intrigue, keep up the good work. When the thumbs down critics make their own video, then they comment! Easy to criticize, harder to come up with your own ideas.

GREAT IDEA,. GREAT USE OF RECYCLING MATERIALS, THANK YOU GOD'S BLESSINGS ✝️⚾🙃

Thank you for sharing this ingenious idea!

You received a standing ovation in our home! BRAVO! 👏👏👏👏👏👏👏

Sometimes I watch YT videos and fast forward to the end because I just want to see how it ends. But your videos are more fun to watch all the way through because I like to see HOW you get to the end. Plus, you know when to FF the video and when to slow down. One thing I would add to your idea, and that is to make several kinds of tabletop accessories to hold different things. The wooden pegs you made are fine, but different (I will call them holders) holders can be fitted into the holes and custom made for different shapes. Additionally, I would not have made them out of wood, because I can see where they could shear off if you tighten too much.

@frankdyck2583

4 жыл бұрын

I watch the Handcraft videos by getting to the end. only because I don't know what he's making.

@HeatMyShorts

4 жыл бұрын

I usually skip to the end first to see what's to be made; and then watch the build afterwards.

@cozzyinternet4706

4 жыл бұрын

hahahah I guess we all were kids once - - skip to the ends of our story books just to find out how the story ends......and then summarise from there! haahah

@Bassinman200

4 жыл бұрын

The wooden 'Holders' (shown in this particular instance) are basically known as 'Dogs' in woodworking. At least that was what trade woodworking during 4 years of Jr. High and High School taught me. A 'Holddown' uses the same holes as a 'Dog' but fit ecentrically so that they dont slip. Of course trade anything in school is now a thing of the past, and anyone wanting to learn a real trade has to go to a specific "Vocational" school outside of the Jr. and High Schools. I took both wood and metal shops in school. At least I know which end of a chisel is used to cut, and which end of a screwdriver drives. And that if a nut won't fit a bolt it's possible that one or the other is 'left hand' thread, and if you turn the nut over it still won't fit the bolt. I had a 'stupidvisor' tell me to try that once - he had a BA but lacked common sense and common knowledge. I told him to try it and see if he could get it to work because I knew that it wouldn't. I believe we are all being 'dumbed down' in our society, in EVERY aspect of life. *****A bench dog is an accessory used on a woodworking workbench to allow clamping of wooden items while being worked or planed. Dog in general is something which holds. At its most basic a bench dog is simply a peg which is installed in a corresponding dog hole in the top of a bench. Wikipedia****

@m.b.82

4 жыл бұрын

I skip to the end so to make sure its worth my time.

Ur so talented good job!

Brilliant ! Thanks a lot for this video ! Love the effort that DIY content creators like you put into your work !

Creative imaginations and skills are fostered through the trades and doing things with your hands. This is why you don't give up Manufacturing. This mans skills could be used in any manufacturing, machine, or wood shop.. Thanks for sharing.

Really nice video. No crappy music, no endless nagging to subscribe. Great idea, I wish I would not have thrown my old ones out. I enjoyed the video, great job!

Loved the video, it seems the dog holes should be all the way thru to keep from catching trash. Very clever thank you for sharing.

Thanks for sharing that, well done very useful!

Adding this to my "must have" list for the shop that I'm planning to build. I'm thinking about all the possible uses based on your repurpose idea. Really creative work!

You... i like you!! I enjoy your creativity as much as watching you actually implementing it! Keep going, you've earned a subscriber!

@hand_craft

4 жыл бұрын

Thanks!

@milotastitikova2261

4 жыл бұрын

@@hand_craft o

Great video as always, love how there's no bgm. I

Very nice addition to the work table. Something from nothing. Keep it up.

You sir are brilliant. Love this project

I've done my share of fabricating so on that note my hats off to you. The part I laughed about was the level of skill it takes to perform some of the fabrications. (Things done by hand) not everyone's going to be able to do it.

@runsunpan6505

4 жыл бұрын

Absolutely. It looks easy but if it were me, I would have ruined it couple of times over.

@fernandorosales2418

4 жыл бұрын

Anyone can learn these skills. All it takes is a DESIRE to learn. No one is born knowing how to use a welder or other machine equipment. It's all learned. For the people out there that can't do this, I feel that they just haven't TRIED. Haven't given it an honest attempt. Yeah, you're gonna ruin a few pieces on your way, but that's ok, that's how you learn. There was a time in our country that ALL men were handy. You had to be in order to survive. Now, less than half the population can change a flat tire on their car. Is this a societal problem, or a skill problem?

Muito util amigo

@pulpo439

2 жыл бұрын

Dantes... *¡¡¡ CALLATE !!!*

I like the way the projects go so fast and right every time!👍🏻👍🏻👍🏻

That’s pretty cool ! I like the fast tapping hammer the most ! !

Awesome, I have a broken jack I need to do something with thanks! I’m going to use a piece of scrap uni-strut instead of the square tubing.

@tonyhemingway7980

4 жыл бұрын

At the beginning, I thought it was unistrut.

Up next: aGood use for a Pigs Foot.🤣 Good Job mate!

This is a really cool idea! Expertly crafted. Thank you!

I just love this guys inventions. Really really clever. All the best to you.

Brilliant! Then I said to myself, those vises used to make this, to demonstrate it's use, could have used the vise there already. No?

@shawnr771

4 жыл бұрын

An additional vise never hurts. Also this could hold wide pieces on the flat side instead of the edge.

@Chaotician69

2 жыл бұрын

No! Not the same kind of vice setup. You can't use the vices he had for large pieces of wood. His new design can accommodate for much larger pieces. Extremely useful for sanding the surface of a small table top as an example, but imagination is the only limit. Totally valid question though. 😃

I’m all for the faithful replication of someone else’s idea but he needs to be referenced. Neil Pask made this (almost exactly) a while back on his channel Pask Makes. He’s a really great guy and I’m sure he’d be happy to know someone else tried his idea.

@11111972cjb

4 жыл бұрын

I'm not sure he would be too pleased not to get the recognition for it though. Cheers.

@juan8.32

4 жыл бұрын

@@11111972cjb what if this guy (Handcraft) never saw the other video? can a similar idea strike two people ? just saying!

@boosted2.4_sky

4 жыл бұрын

Could be the same person with multiple channels....$ 🤔

Now that's what you call a excellent idea! Of to the studio/workshop to make one for my bench, many thanks for the share

Wow!,,,simply amazing. Thanks for sharing

An ingenious idea. Certain things surprised me though : your use of apparently low quality wood - it looked like ordinary 2X4 lumber stock ; your use of Forstner bits in a hand held drill and drilling from both ends rather than a straight through bore.

@abdulkek4821

4 жыл бұрын

Harold L POTTS the Wood can crack if you drill straight through

@crustyoldfart

4 жыл бұрын

@@abdulkek4821 Yes of course. My point was the use of Forstner bits in a hand held drill which can give your hand/wrist a nasty jolt. Secondly the purpose behind Forstner bits, intended for use in a drill press, allows precision of depth of penetration, allowing the point only to pierce the bottom of the hole. The piece is then reversed and the bit inserted in the hole, allowing a fresh cut from the other side and avoiding the splitting you mention.

nice video, but EXTREMELY DANGEROUS to rip cut wood on a miter saw!!!

@josephmartinez3851

4 жыл бұрын

At least we can look back at this video and remember when he had all his fingers....

@scottlyttle5586

3 жыл бұрын

While wearing gloves, no less!! So much stuff here where he's not being too safe.. I can't watch anymore.. cant support the viewer numbers with his unsafe practices. Someone will follow his ideas and cut off fingers..

MASTER thanks another great idea since I found your videos you keep me busy grasias hermano.long life to you

great ideas mate. will try some during the covid lock down.

I’m surprised you didn’t start with unistrut. Did you have square stock on hand, or is unistrut unavailable in your area

@boosted2.4_sky

4 жыл бұрын

I'm pretty sure that was unistrut....

@strykerlandwill

4 жыл бұрын

you are pretty sure it was strut? . Then we watched a different video. I saw him cut a tab out of a a piece of tube steel .

@carlantony3126

4 жыл бұрын

Was lighting trucking not unistrut

@boosted2.4_sky

4 жыл бұрын

@@strykerlandwill It was a solid piece of unistrut ...not all unistrut has cut outs in it some are solid and then you flip it over and the edges are curled in... like unistrut...👀

Why don't you show the end result right at the start so people can see what the end result is? Then they can decide if it's worth watching, to see how to make one. Good work though!

@hand_craft

4 жыл бұрын

Usually people like to watch the process of work itself and a little intrigue adds interest! For those who care about the end result you can use the rewind function )

@chrisgraham2904

4 жыл бұрын

I'm with you Paul. It's "click-bait" to make you watch the whole video. I just jump to the end to see what the hell it is, then decide whether I'm going to go back and watch the build. Too often I've watched someone's build, only to find that their build doesn't even relate to the tile of the video and what they are building has no interest to me, or what they built is just crap.

@labakrapscalio451

4 жыл бұрын

@@chrisgraham2904 I tried jumping to the end to see and I still have no clue other than it's a "unique idea"

@makingcookingfixing

4 жыл бұрын

I was just going to say the same exact thing! Very annoying to watch

@burleydad

4 жыл бұрын

Start your own DIY KZread channel and make the videos the way you want them. So far, Vanya has not let us down.

A very good build! Always enjoy your workmanship and ideas. Thanks!

Genial!!! Felicidades por tu trabajo!!! Bendiciones éxitos!!!! Saludos Cordiales desde Asunción, Paraguay

How to angle grind my fingers off in one easy lesson. Rule one keep hands away from wheel. I have seen just how fast a man lost his fingers. Not nice.

@cornelius131

3 жыл бұрын

Why do you say that? When he uses the mitre saw?

@hughjarrse

3 жыл бұрын

Those gloves used to have fingers!

@cornelius131

3 жыл бұрын

@@hughjarrse And the mitre saw eate them! ;-D :-D :-D

@cornelius131

3 жыл бұрын

I'm carpenter - joiner - cabinet maker & it's really difficult to correctly clamp a piece so close to the blade. If you are concentrated at your job & if nobody comes to disturb you, there's no problem.

@hughjarrse

3 жыл бұрын

@@cornelius131 agreed ..... a lot of people watching this are not

People that disliked thought angle grinders, dremels, and routers were quiet tools before starting the project... 😂

@Chaotician69

2 жыл бұрын

Lol ... my angle grinder, router and dremel are all louder than any of my saws.

Great foresight! Mesmerizing to watch your idea come to life!

A lot of wasted time on a simple light duty hold down. Not worth the effort.

Parabéns, vejo que dá pra fazer grandes coisas com grande inteligência.

Muito bom, este cara só faz coisas bacanas e ótimos trabalhos.

Go to "pask makes" here on KZread to watch the guy who did it first

@franckherrmannsen7903

4 жыл бұрын

indeed at least give the credit

Why the hell blow it off with air if you're just going to cut it to pieces. What was the point really?

@james_robnett

4 жыл бұрын

That's what you got out of this video ? Weird. I can tell you why I would, because I don't want dirt all over my bench. Metal I can pick up with a magnet scoop, dirt not so much.

Hola. Gracias por compartir esta genial idea... Y Felicidades por un trabajo excelentemente desarrollado y una terminación brillante... Saludos.

Great stuff. Thanks for the inspiration!

I wish I had just 1,000,000th of your ideas, and talent to make stuff. You rock

Nice, inexpensive way to make a hold clamp, small glue-up section on a bench, and with dogs as well for multiple contact points and lengths. If you had several of these staged on your work bench, you could glue up anything from a birdhouse to a butcher block table top, and more. Great idea, and a cost minding one to boot.

Love the editing and chiseling sound and harsh sounds muted thank you for sharing

If your coming up with all the ideas I've seen so far on your channel your pretty damn genius. Your Macgyver / A-team all in one.

So good. Your handy work and crafting is so satisfying to watch too.

Some people are born gifted, the rest of us mere mortals just copy! Well done mate. I'm not going to make it he same one as you made but I have several of those cheap jacks in a box and I need a jack for my drill press so that's my next project. Cheers from Perth Australia.

I enjoyed watching the slightly accelerated crafting. we all have our vices.

Muy bueno amigo ,felicitaciones ,saludos desde Argentina ! 👊

You're special buddy.. Keep your talent up.

You my friend are amazing with your ingenuity, your videos are great and I enjoy watching them very much, Thank you.

u possess a gifted intricate mind...thanks 4 sharing...

A beautifully designed idea exactly planed, especially I liked the work with the cup drill bit at the end

@user-ql1xz6gc5z

3 жыл бұрын

Gud

ممتاز جدا عقليه جميله الى المزيد من الابداعVery excellent, a beautiful mindset, to more creativity and suspense, waiting for more amazing videos والتشويق منتظرين فديوهات اكثر روعه من ذالك

Incrível muito criativo bom mesmo 👍👍👍👏👏👏🙏🙏🙏

Ficou muito bom parabéns 👍👍👍😎

Outstanding job Vanya. You have inspired thousands people with your excellent creativity

εχεις φτιαξει εναν απιθανο παγκο εργασιας, μπραβο!