UNIBIT: The Advantages of Step Drills - Gear Up With Gregg's
Тәжірибелік нұсқаулар және стиль
Welcome back to Gear Up With Gregg's! Today we're going to step up our knowledge of Unibit high speed steel step drills. What makes the Unibit special, you may ask? Check out this episode to see for yourself how this single drill bit can drill 13 different size holes.
0:00 INTRO
0:33 WHAT IS THE UNIBIT OR STEP DRILLS
1:32 TYPES OF IRWIN UNIBITS
2:17 MOST COMMON USES FOR STEP DRILLS
2:50 WHAT DOES A UNIBIT DO
3:14 HOW TO USE THE UNIBIT
5:03 OUTRO
If you require more information about any of the products you saw in this video, follow this link!
greggdistributors.ca/Tools-Sh...
Subscribe to our channel and stay up-to-date on all of our videos including Heads Up for Hosers, Gear Up with Gregg's and more!
Visit our website for location details and information on how you can contact your local Gregg's branch today.
greggdistributors.ca/
Follow Us!
Facebook: / greggltd
Twitter: / greggltd
Also, remember to have a Great Canadian Day!
Пікірлер: 24
Enjoyed hearing the history of the Unibit.
Thank you for sharing the proper details.
Harry C Oakes (we called him Cal) was my Great Uncle, he was an eccentric inventor, just as one would expect. Sold the rights/patent to the bit, bought planes and fast cars.
@sophiakirk819
6 ай бұрын
Harry C Oakes was my great grandfather. Cousin?
"The first STEP in this BIT is safety" I see what you did there
Great ! Finally a real Canadian channel. Good tips. Liked & subscribed. 🙂👍🇨🇦
@GreggDistributorsLP
3 жыл бұрын
Thank you for supporting our 100% Canadian Channel! Stay tuned for more to come!
Thanks for your informative video. Very helpful.
Thank's for the intel - God bless! (subscribed) :)
A prior job that I had, I was making Unibits
Needed a how to sharpen segment in there.. because you can sharpen them over and over.. until you get too close to center and make a paperweight out of it...
I watched your video yo.
What is the recommended RPM? Should I slow down with bigger diameters?
@GreggDistributorsLP
4 жыл бұрын
From the literature we have, there does not seem to be a specific RPM that the manufacture recommends. Generally speaking though, when drilling holes in metal applications, lower RPM’s with lots of lubrication is ideal. Thanks for watching our video!
Which cuts SSteel the best?
@GreggDistributorsLP
4 жыл бұрын
The Titanium Nitride (TiN) Coated would be best.
@twagner6155
3 жыл бұрын
None of the ones I saw. Carbide would work if it was made. Titanium on the drill is just show, only .001-.003 only.
@twagner6155
3 жыл бұрын
Cobalt if made
I'm using a step bit to make the hole in my car firewall bigger and all it does it's stop moving while in the hole why is that
@GreggDistributorsLP
Жыл бұрын
Is it possible that the chuck is not connected properly? If It is then using a lubricate like WD-40 should help. greggdistributors.ca/search?q=wd-40&resp_group=Default,Variations,ItemProperties
@fryncyaryorvjink2140
10 ай бұрын
I'm way late but are you putting the drill in the hole before pulling the trigger? Pull the trigger to get some rpm's before making contact with the surface to be drilled
Loren, I so enjoy your flip haircut. Please let me know your hairdresser.
@Z-Ack
Жыл бұрын
I’m betting his “hairdresser” is an old dude named bob that does it for 15$ and only cuts hair 2 ways.. like his or bald...
I can't understand a word that he is saying because of the unnecessary music in the background.