Actually there is a way to tell the ratchets apart! Look at the lines around the bit hole: For 60 there are 3 lines on each side For 80 there are 4 lines on each side And for 70 there are 4 lines on one side and 3 on the other

@mawnnsval

Ай бұрын

That’s clean 😱 each line represents 10 to add up.. why did it take me this long to notice LOLL

@NEKOplaysgamez

Ай бұрын

Another way to tell at a glance for 70 height is that the area around the bit hole is octagonal instead of circular

I can’t wait to get 4-90! It’ll be the BEST RATCHET

@RaspyCh

Ай бұрын

To me that would be too tall lol

@austinotto5392

Ай бұрын

Yea, especially on high needle 😂

@Zcoolestgaming

Ай бұрын

4-90 would absolutely DESTROY the meta

@Lu_Bu__

22 күн бұрын

@@Zcoolestgamingno tf it wouldn’t 4 sides is terrible 😂😂

@littenflame85

13 күн бұрын

@@Lu_Bu__ wooosh

Gonna be all fun and games until the 0-60 ratchet drops (That is a joke I do not actually think that should exist). In all seriousness it'd be interesting if we get akin to 230 from mfb.

Always here to support my bros! Like always bro awesome video! Straight to the point on the explanation! Keep grinding man, hope you're doing good bro!

@nizumablader

Ай бұрын

thanks bro!

With the release of 2-80 having a unique shape from your traditional ratchets, I hope future ratchets like 6-sided or any others will have the same blade/cleave shape. Would be aesthetically cool for Victory Valkyrie to have 6-60 resembling Boost disc (though I doubt it since the disc was replicated along with the layer)

The best beyblade x ratchaets to use is 3-60,3-70,3-80,9-60,and 9-80 ratchet is what i would recommend for tournaments

@nizumablader

Ай бұрын

5-60 and 5-70? I’d use both of those before 3-80 or 9-80

here's an interesting idea i feel like no one has tried when you talked about ratchet weights. min maxed weight distribution combos. like i feel it would be interesting to see what would be the most outward distributed combos and inward distributed combos that still function in each gen. like for plastic i think heavy metal core would be mandatory for central, while the draciel shield blade base would be for outward. burst would probably use Longinus core for central and guilty blade for ourward. metal and x i don't know what would work but it would be cool to see what parts will do so. maybe wizard rod and then a bx bey with more metal towards the middle.

Great information on ratchets! While I do agree that the 60 height ratchets are generally better, I don't completely agree that the 80 height ratchets are as bad as you made them seem. There definitely are cases where the height gives an advantage, most popular case being Hell Scythe 3-80B. Certain blades when given a height advantage, can cause the opponent to destabilize and make them lose balance easier

@nizumablader

Ай бұрын

I definitely think 80 height has a place somewhere, I would definitely run 60 on scythe over 80 though. Hellscythe on 3-60b is one of the most common competitive combos since launch.

I'm building a knight shield ball combo (cuz I like hell scythe, but I wanted to do something different, and I don't have wizard rod yet), and I was looking for a ratchet to use on it. Should I go with 3-60 to help with the burst resistance, or 5-60 to increase the weight and give it more stamina? (Or maybe another ratchet that's better)

@nizumablader

Ай бұрын

3-60 or 5-60 are both good picks

Primely 3-60 & 9-60🔥

I want a 0-60and 0-80 ratchat and also a 10-60,10-70,and 10-80 ratchat would be dope

@nizumablader

Ай бұрын

I think 0 would be to busted lol.

Hey, are the Takara parts compatible with the Hasbro ones. If I have multiple of both can I mix and match pieces? I know you couldn't with the burst beys.

@nizumablader

Ай бұрын

Yes everything is cross compatible

I have a question, are the 80 ratchets tighter? I noticed they have 4 lines around the hole instead of 3 like the 60 ratchets and wondered if that has something to do with the tightness

@nizumablader

Ай бұрын

I haven’t notice that they are

@sergxcalius9908

Ай бұрын

I do notice for me at least, most of the 80 height ratchets I have are slightly tighter. Lots of my 80 ratchets are harder to click in than the 60 ratchets

@Zcoolestgaming

Ай бұрын

80 ratchets are tighter actually

@nizumablader

Ай бұрын

@@Zcoolestgaming this is speculation, there is certainly variance in tightness from ratchet to ratchet but 80 height is not universally tighter.

Sorry if i missed you say this but it aeems like theres literally no reason to play a taller ratchet if the same amount of sides is available lower. Only reason would be budget/availability? 😅

@nizumablader

Ай бұрын

Basically lol

@digisplosion

Ай бұрын

@@nizumablader 💀

@sergxcalius9908

Ай бұрын

Yea but some combos do well on higher ratchets. I like Scythe Incendio on 80 ball cause for me at least, it seems to be able to defend better and same with Helm Knight

@digisplosion

Ай бұрын

@@sergxcalius9908 ooh interesting... and it performs worse on 60 in that aspect?

@sergxcalius9908

Ай бұрын

@@digisplosion well depends. Taller seems to defend smash attackers like Phoenix, buster, and dagger but die to stuff like shark. Shorter is a bit more one size fits all but I find to die very quickly to stuff like buster and sword.

do you suppose the increased contact points of the 4-sided ratchet could be a benefit with the introduction of left spinning beys? theoretically, an opposite spinning bey wouldn't really burst the ratchet if it's contacting with the way it screws onto the blade. beyblade burst had the spring in the bottom to kinda encourage bursting, but with the X system, bursting is entirely based on knocking the parts loose

@nizumablader

Ай бұрын

So the ratchets have a switch to change them from left to right, so left spin will still be able to burst against right spin it’s just going to work a little differently. I think 5 sided will probably be better for left depending on what we get. I imagine most of the left spin stuff we get will be attack oriented so I don’t imagine we will be getting a lot of spin stealers anytime soon but we will see what takara cooks up.

@LucasTigy2

Ай бұрын

@@nizumablader i guess my thought was that, since the left spinning bey would be spinning in the same direction as the ratchet spins to clip onto the blade, that you may actually hit the protrusions and have a chance to re-tighten the ratchet if it becomes loose. i'm not saying it wont burst, but i'm curious to see how opposite spin battles play out when they are turning with the opponent's ratchet instead of against

@Zcoolestgaming

Ай бұрын

It will play out the same way burst did Layer contact would be the only way to burst the bey​@@LucasTigy2

In what scenario would someone be using a higher 80 rachet, ie what are the benefits? Also what are the functions of the blades and the difference between for eg 5 and 9?

@nizumablader

15 күн бұрын

The functions of the blade as in the top part of the beyblade. The difference in the nubs on ratchets just affects how easily it will burst and the balance. 4 sided is considered the worst for burst resistance. 9-60 is hardest to burst, 5-60 is fairly burst resistant and is the heavier of the ratchets. 80 height more often than not is not beneficial over 60 height but there are instances where you might want to use it.

@carr16k

15 күн бұрын

@@nizumablader thanks for the quick reply. Could I assume that the lower the number of nubs the easier it is to burst? As for the height, I just can't think of a scenario where one would use a higher rachet. Hence I'm curious.

@nizumablader

15 күн бұрын

@@carr16k no not always, 3 sided, 9 sided, and 5 sided are all pretty decent. 4 just because of the shape for whatever reason tends to burst the easiest.

Nice Pendulum back there is that an OG release or a new one?

@nizumablader

10 күн бұрын

It’s an old d-1 Grand Prix

I have a question why continue to do stamina type and defense type at 80 height. The point defense type is to have much lower sense of being burst🤔😶

@nizumablader

Ай бұрын

To be completely honest I don’t put 80 height on anything, I’m sure it has its place somewhere but competitively I don’t see a reason to use it over 60 at the moment. Could probably get away with 5-80 or 9-60 on some things.

@phantomV630

Ай бұрын

@@nizumablader Yes that makes sense. but why TT put it on 80. I want to figure out

@nizumablader

Ай бұрын

@@phantomV630 they have to put it on something. Stock parts don’t always make sense, or rather they aren’t always optimal.

@axltheriolu8791

Ай бұрын

This almost reminds of of the issue that 145 spintracks had back in metal saga. And for some reason they kept putting on defense types like rock leonie, rock Aries, Earth eagle, twisted tempo, etc, etc

Hey are ratchet cross compatible between hasbro and takara

@nizumablader

Ай бұрын

Yes everything is cross compatible

💯🔥🔥🔥❤‍🔥

The ratchet 9-80? Could be competitive?

@nizumablader

Ай бұрын

Usable but still makes you prone to being top heavy and easy knocked out

So... is there any reason to ever run a higher ratchet over a shorter one? Ever?

@nizumablader

Ай бұрын

Welllllllll at the moment I’m not sure there’s an advantage. I’d run 70 height but not really 80 height.

I already saw a vid like this one

@nizumablader

Ай бұрын

Nice!

@galactic-beys

Ай бұрын

@@nizumablader your an awesome dude Nizuma!!