Understanding Directional Control Valve Schematics
Ғылым және технология
Website: klettetech.com/
Instagram: / klettetech
Publisher: www.atplearning.com/product/2...
Video on Centers Position: • 4/3 DCV Centers Work
This video is about Directional Control Valve Schematics. It will walk you through how directional control valves are named and how to read the schematics of the most common DCVs. Including 2/2, 3/2, 4/2 and 4/3 DCVs. Link to the videos mentioned are below:
@KletteTech
Пікірлер: 289
Brilliant!!! I never comment on content, but your account is full of light bulbs going off, so I have to say something. I'm attending a 6-month wind turbine tech school at the moment and we are on the hydraulic section now. We have a lab on campus with the hydraulic trainers and it all makes sense, however our teachers different styles are rudimentary and basically "your dumb if you don't understand this system' kind of vibe. After watching just one your videos it all clicked! especially the magnets having the different combos of DCVs. Teacher of the year award goes to you Sir. I'm going to supplement your videos for the schools videos and send your link to the rest of the students. Thanks heaps! -B
@KletteTech
3 жыл бұрын
Thanks for the compliment and thanks for watching. Please share. Hopefully it can help so more people.
I never knew Justin Timberlake was so knowledgeable on directional control valves!!
@daddy9132
8 ай бұрын
😂😂😂😂
@KletteTech
4 ай бұрын
Haha
I don't do pneumatics or hydraulics every day, but do run into problems I have to understand and correct every now and then. I have had to beat my way thru schematics in a slow, painful way, searching the Internet to fill in pieces of the puzzle. Now I find this video which explains literally everything I've ever needed on this subject in 16 minutes! Incredibly valuable.
@KletteTech
8 ай бұрын
Thanks for the message happy the video helped.
I've always found this subject a little confusing, but you really did a great job of clearing things up for me.
@KletteTech
2 жыл бұрын
Glad it was helpful! I have a lot of other videos on this and other topics
Thank you very much for making many useful videos. I am a hydraulic salesman and I found your website because I have to make an English presentation. English is not my mother tongue so it is really useful to listen to how you describe the basic knowledge in English.
@KletteTech
Жыл бұрын
thanks for watching. I am really happy they help
This has helped me greatly. I have been tasked with installing a bunch of pneumatic vibrators using Mac 65 3/2 and I have been scratching my head. Thank you. I hooked all 63 up and they worked flawlessly the first go.
@KletteTech
3 жыл бұрын
That is awesome. Great job
Sir, you did great and you did not go on and on, you were very precise and to the point. Your video delivered more than an hours worth of content in the span of 16 minutes. That is something that instructors and educators strive for. If you think you ramble look at other youtube videos and then reevaluate yourself and realize that you did a fantastic job.
@KletteTech
8 ай бұрын
Glad it was helpful! Thanks for the message happy the video helped.
Good job on the video, thanks for the explanation. I'm a mechanical/aerospace engineer and just wanted to better understand the schematics on the valves. I still need to learn a bit more, but this was a very good start. Thanks again.
@KletteTech
2 жыл бұрын
Glad it was helpful!
@frog6054
Жыл бұрын
I'm learning mechatronics engineering
This has helped me greatly. I have been tasked with installing a bunch of pneumatic vibrators using Mac 65 3/2 and I have been scratching my head. Thank you.
@KletteTech
3 жыл бұрын
that is great. Thanks for watching
WAAAAAW!!!! Thank you A LOT, you have no idea how much this is going to help me. Some teachers take for granted that we know this stuff when in reality we don’t and that’s when we get to be left behind, thank you thank you thank youuu
@KletteTech
3 жыл бұрын
Glad it helped! And thanks for watching.
Excellent video! I've been a purchasing agent for years, buying many of these types of valves. For the first time, I actually understand what I've been buying! :)
@KletteTech
8 ай бұрын
Thanks for the message happy the video helped.
It was a clear and pleasant explanation of the valve notations. I appreciate how you explained the problems faced when using this notation on an industrial level.
@KletteTech
4 ай бұрын
Glad you liked it
I just want to thank you for the way you put this presentation together and your style of teaching...AAAA++++
@KletteTech
Жыл бұрын
You're very welcome!
Really awesome video. Need to build my first pneumatic control system at work and learned everything I need to know in 15 minutes.
@KletteTech
2 жыл бұрын
Glad it helped. Thanks for watching.
Great video! I am new to hydraulics but your explanation of DCVs has made me understand it completely.
@KletteTech
Жыл бұрын
Great! Happy it helped
WOW!!! Great way to convey this information, shedding light!!! You won a subscriber thank you for this content.
@KletteTech
Жыл бұрын
Welcome aboard!
You explained everything so well I was so confused before Thanks!
@KletteTech
3 жыл бұрын
Glad it was helpful!
Excellent Description. Hit every topic I had questions about. Your AWESOME!!!!!
@KletteTech
3 жыл бұрын
Glad it was helpful!
Thanks. You really did a good job. Only from your explanation, i start to understand how DCV works!
@KletteTech
2 жыл бұрын
Glad it helped!
Thank you. The video is enough to clear all the confusions.
@KletteTech
Жыл бұрын
Great
KZread is the Goat No CAP
you are awesome! I watched tones of videos that only made me more confused, yours, it just clicked! thank you!
@KletteTech
4 ай бұрын
Glad it helped
Awesome lecture. Clearly explained. Thanks a lot.
@KletteTech
2 жыл бұрын
Awesome
Should have found this video during my pneumatics basics class, great channel
@KletteTech
Жыл бұрын
Thanks 👍
Great teaching session! You were put here to teach for sure.
@KletteTech
Жыл бұрын
I appreciate that!
@endtimeawakening5557
Жыл бұрын
@KletteTech You're quite welcome young man, God bless you!
Thank you so much for this video! Very helpful preparing for my international fluid power society mobile hydraulic test next week!
@KletteTech
Жыл бұрын
Glad it helped!
the smoothest explanation ever thanks!!
@KletteTech
4 ай бұрын
Awesome
It suddenly clicked for me right at the 9:30 mark. I could almost physically feel that connection form in my brain. For whatever reason I haven't been able to comprehend these schematics but it all immediately made sense at that moment. The schematic itself IS the moving part. Thank you so much.
@KletteTech
2 жыл бұрын
Glad it helped!
Very clear and informative! Thanks!
@KletteTech
2 жыл бұрын
Thanks for watching!
Thank you for the great demonstration, sir. I learned alot from it. 👍
@KletteTech
2 жыл бұрын
Glad it was helpful!
Excellent. A Very useful & detailed explanation.
@KletteTech
Жыл бұрын
Thanks
excellent way of teaching the basics of DCV salute :D sir
@KletteTech
2 жыл бұрын
Glad you liked it
Well explained thank you for shading light on
Nice, video was great, very simply explained along with visuals on the white board
@KletteTech
4 ай бұрын
Your Welcome
Thank God for you. I'm in a related fluid power course for my automation engineering program and i was completely lost from my professors lecture.
@KletteTech
2 жыл бұрын
Happy to help!
Excellent work, exactly what i was looking for. Thank you kindly
@KletteTech
Жыл бұрын
Your welcome
Thank you, really can help me to understand directional valve schematic, very informative.
@KletteTech
2 жыл бұрын
Glad it helped
Thank you, you’re a great teacher.
@KletteTech
8 ай бұрын
You're very welcome!
This helped me a lot. Thank you!
@KletteTech
3 жыл бұрын
Glad it helped!
thank you so much for clearing my doubts that i had since a very long time, gonna watch all of your videos on H&P :)
@KletteTech
8 ай бұрын
Happy to hear that!
Great video, thanks clarifying the subject.
@KletteTech
Жыл бұрын
Glad it was helpful!
Thank you, you saved me a lot of time.
@KletteTech
2 жыл бұрын
You are welcome!
thank you..... learn this the hard way 24 years ago, when I'm working as ground support at airport. All cargo pallets loader had hydraulic motor, ram, pump. a refresh for my new project.
@KletteTech
Жыл бұрын
Well said
You're the best, man these damn notations have been boggling me up
@KletteTech
2 жыл бұрын
Glad is helped
@uguideengineering9348
2 жыл бұрын
I have also created such a one. Please check it.
Great job young man! Thanks for sharing.
@KletteTech
8 ай бұрын
Thanks for watching!
I was kind of confused until you slid the valve right and left. Then I went, duh! Makes perfect sense now. Thanks!
@KletteTech
4 ай бұрын
Glad it helped
Omg, thank you so much. I'm chemical eng. and I'm learning about DCV to understand how hydraulic systems works in a Vertical roller mill and cooler grates!!!
@KletteTech
2 жыл бұрын
Glad it helped!
Thanks Mate, I really struggled to find out what are these side symbols presented at 12:40 . Once again thank you, what a Legend
@KletteTech
2 жыл бұрын
You're very welcome! And thank for watching
Really well-explained, thank you!
@KletteTech
Жыл бұрын
Glad it was helpful!
I’ve got a hydraulic power pack for torque wrenches that’s giving me problems and I’m trying to teach myself how to work on them. There’s a sticker on the side of one of the parts identical to one you’ve shown and explained. Really helped me to understand the system and what port does what
Boom, nailed it! Great video!
@KletteTech
Жыл бұрын
Appreciate it!
Excellent presentation.
@KletteTech
3 жыл бұрын
Glad you liked it!
Thanks, the symbols make sense now! I'm an EET student and these are part of our PLC course.
@KletteTech
4 ай бұрын
Great. Happy they helped
TKS for your tutorial.I appreciate it!
@KletteTech
2 жыл бұрын
My pleasure!
Thank you very much. It's very helpful ❤
@KletteTech
8 ай бұрын
Thanks for the message happy the video helped.
Great job, thanks for the awesome explanation.
@KletteTech
Жыл бұрын
Thanks
Great Video, please keep them comming
@KletteTech
3 жыл бұрын
Thanks, will do!
Thanks, this open my vision about hydraulic...so nice teacher 👍
@KletteTech
2 жыл бұрын
Glad it was helpful!
Yo bro this really helps me alot as im new to hydraulics :)
@KletteTech
3 жыл бұрын
Glad I could help
Really informative, I'm in the light
@KletteTech
Жыл бұрын
Great
❤❤❤❤ so amazing. I really enjoyed watching this video and I like. I learn also from this presentation and I want to learn more
@KletteTech
Жыл бұрын
Go for it!
Very well explained.
@KletteTech
4 ай бұрын
Thanks
This helped a lot, I am work on becoming a PE Belt Maintenance Mechanic for UPS… So Thanks
@KletteTech
Жыл бұрын
Glad it helped! And good luck
Thank you . great explanation!!!!!
@KletteTech
4 ай бұрын
Thanks for watching
you just thaught me a new alphabeth. many greetings to you sir.
@KletteTech
2 жыл бұрын
Great. Thanks for watching
Thanks man ...learned a lot 💯
@KletteTech
Ай бұрын
Glad to hear it
Im learning this in German Language. The thing is our teachers here in Germany expect that we have knowledge about these. Thanks for your explaination, this helped me understand it.
I started a college class to advance at work. I am (struggling at) learning pneumatics and when he slid that magnet over, the whole class makes sense now!
@KletteTech
Жыл бұрын
That is great. Good luck with your classes. Please share the videos with you classmates
@robertwalker8910
Жыл бұрын
@@KletteTech The Final is in 2 weeks. If they fail, they cant blame us :) Because I have been telling everybody about your amazing explanations!
WOW!!!! THANKS FOR THIS GREAT INTRODUCTORY LESSON!!! CAN YOU RECOMMEND A FEW GREAT TEXTBOOKS/WORKBOOKS ON READING AND UNDERSTANDING SUCH SCHEMATICS?!...
@KletteTech
3 жыл бұрын
Yes I can. This is the one that I wrote. I think would help a lot. www.atplearning.com/product/1028/fluid-power-systems
Omg what a nice explaination ......1000/10 .......so clear.... thankyou very much...love from India🌹♾️🇮🇳
@KletteTech
10 ай бұрын
So nice of you
@mousumisahoo8022
10 ай бұрын
@@KletteTech ❤️
Beautiful explanation, specially spool movement demonstration 😆
@KletteTech
2 жыл бұрын
Glad you liked it!
Great explanation
@KletteTech
Жыл бұрын
Glad it was helpful!
I really appreciate the vedio thank you very much for sharing this informative tutorial.
@KletteTech
2 жыл бұрын
Glad it was helpful!
Absolutely lovely..got a new sub
Good explanation. Super
@KletteTech
3 ай бұрын
Thanks
What a great video, do you have any video explaining the functioning of the manual directional valves? Like walvoil or BLB, spool motor or spool cilinder?
Thanks for great information 👍
@KletteTech
2 жыл бұрын
Glad it was helpful!
Thanks a lot for the explanation..
@KletteTech
Жыл бұрын
You are welcome
Great explanation👍👍
@KletteTech
2 жыл бұрын
Glad you liked it
Thank you so much for this video, I’m an electrical student so I’m kinda new to pneumatics… I have a shrink wrap machine pneumatic circuit and I’m really struggling to read it but I’ll try again after watching this video.
@KletteTech
2 жыл бұрын
Good luck and thanks for watching. I have couple other videos that might help as well
Wow, very nice! Thanks!
@KletteTech
Жыл бұрын
Thank you too!
Great education, appreciate it!
@uguideengineering9348
2 жыл бұрын
Exactly
@KletteTech
2 жыл бұрын
My pleasure!
CLEAR AS MUD!!!LOL J/K it makes a little more sense now. I have never used or drawn schematics and need to learn all this now.
@KletteTech
Жыл бұрын
I have a lot of videos on it. Check them out
Great video , thanks ✌🏻
@KletteTech
2 жыл бұрын
Glad you liked it!
Excellent...
thank you …easy understanding...
@KletteTech
4 ай бұрын
You are welcome!
Brilliant ! Thank you !
@KletteTech
3 ай бұрын
Your Welcome
awesome video thanks !!
@KletteTech
4 ай бұрын
Your Welcome
Thank you for your help.
@KletteTech
3 жыл бұрын
You're welcome!
This is a great video it made me understand how the Spools for a MCV of an excavator work since I’ve stripped them do you mind making one that explains The priority valve
Great video!
@KletteTech
2 жыл бұрын
Glad you enjoyed it
thank you for sharing this video
@KletteTech
3 жыл бұрын
My pleasure
Dude! This was so helpful! I really appreciate how you broke this down in simplified terms. Kudos, to you sir! 👍👍
@KletteTech
Жыл бұрын
Glad it was helpful!
Good teaching sir
@KletteTech
Жыл бұрын
Thanks
u teach better than my lecturer
@KletteTech
3 жыл бұрын
thanks
really great!
@KletteTech
Жыл бұрын
Thanks
You are getting a subscribe and a like. Thank your Sir
@KletteTech
2 ай бұрын
Welcome aboard!
شرح رائع شكرا لك
@KletteTech
27 күн бұрын
شكرا على التعليق
Nice outline, very helpful. Please how do you distinguish between 5/3 DCV and 4/3 DCV. it's a bit confusing. Thanks.
@KletteTech
3 жыл бұрын
A 5/3 is used in pneumatics. It has an extra exhaust port.
Thanks for sharing
@KletteTech
2 ай бұрын
My pleasure